• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2022

In this study, vibration analysis of washing machine dehydration was carried out using laser sensors. The suspension of the washing machine was attached to a jig developed for this study. In addition, 10 laser sensors were attached to the jig. The channels of each laser sensor are composed of five channels: front, rear, left, right, and upper. Data acquisition equipment was used to obtain sensor data. The measured data were processed using signal processing, and interpolation of the data was performed using MATLAB with robust interpolation. Vibration analysis according to unbalanced mass and sensor attachment points was carried out.

• 패션비즈니스
• /
• 제26권3호
• /
• pp.98-115
• /
• 2022

The purpose of study was to analyze the process of accepting by BTS fans. The methodology used in this study was qualitative research using grounded theory and the results of the study follow. As a result of open coding, 47 concepts, 23 subcategories, and 14 categories were derived. In the axis coding stage, the casual conditions were "Recognition of BTS image," "Fascinated by BTS image," "Simple consumption of BTS image," and "Arising and expansion of curiosity about BTS image." The contextual conditions were "Accessibility of BTS image" and "Abundance of BTS image searching paths." The central phenomenon appeared to be "Immersing and studying BTS image." The arbitration conditions were "Capabilities required to reproduce BTS image" and "Motivation for contributing BTS image." The actions/interactions were "Presenting BTS image," "Contribution to the spread of BTS image," and "Involved in forming new BTS image." The result was "Emergence and expansion of new BTS image meaning" and "Strengthening attachment to BTS." Through process analysis, it was found that acceptance of BTS images consisted of five stages: "Recognition of BTS image," "Becoming curious about BTS image," "Searching BTS image," "Intervention of BTS image." and "Reproduction of BTS image." As a result of deriving the core categories through selective coding, the core category was "Forming a bond while participating in the BTS image."

• 한국멀티미디어학회논문지
• /
• 제3권1호
• /
• pp.63-76
• /
• 2000

기존의 CSCW (Computer Supported Collaborative Work) 시스템은 단순히 문서나 메시지를 구성하고 전달하는 기능만을 지원할 뿐 협동 작업자들간의 조직구성, 업무분할 및 통합, 작업흐름 제어와 같은 인지학적 기능등은 효과적으로 반영하지 못하고 있다. 본 연구는 협동작업환경에서의 CAD(Computer Aided Design)/CASE(Computer Aided Software Engineering)와 같은 공학 디자인 프로세스를 인지학적으로 지원하기 위한 CSCW 시스템을 개발하는 데 그 목적이 있다. 제안된 DCWA (Distributed Collaborative Writing Aid) 시스템은 CAD/CASE 및 시뮬레이션 기능을 하나의 시스템으로 통합함으로써 조직구성, 업무분할, 작업흐름제어가 이들 기능에 통일적으로 적용될 수 잇도록 하였다. 특히 CAD 도구에서는 다중 사용자들 소유의 그림객체 간의 바인딩, 어태치먼트, 스케일링 기능들은 제공하여 결합 형태 및 정도를 나타내는 관계성 표현이 가능하도록 함으로써 업무분할 및 병합이 CAD 도구에서도 명확히 드러나도록 하였고, CASE 도구에서는 소프트웨어 시뮬레이션 기능과 연계하여 작업흐름 제어가 용이하도록 하였다. 이는 또한 제품을 생산하기 전에 미리 모형을 시뮬레이션 해봄으로써 제품 개발의 시간과 비용을 단축할 수 있는 효과를 가져다 준다.

• 패션비즈니스
• /
• 제23권4호
• /
• pp.127-139
• /
• 2019

Up-cycling has evolved from its original form of the simple recycling of waste, into an industry of its own that has been gaining momentum. In many developed industries, up-cycling is increasingly seen as an 'environmentally-friendly way of production and ethical way of consumption'. However, an examination of the designs of branded up-cycled products suggests that there is a need for product development fueled by further research on materials. The purpose of this study is to introduce various production methods that can overcome the shortcomings of using waste material and Korean motifs for use in product development, which ultimately contribute to enhancing the potential variety and character of up-cycled products. In order to do so, the up-cycling industry was examined to define key concepts, domestic and overseas markets were surveyed, and case analyses were conducted on domestic and foreign up-cycling brands. In addition, after tracking how leather is discarded and accumulated as waste and then collecting the discarded leather, the properties of the material were analyzed. A study of Korean motifs was followed by the concept summary, and upcycling design expressions that exemplify Korean images were identified. The following two novel methods were used to create six up-cycled bags using collected discarded leather. First, lucky bags and moon pots were selected from various Korean motifs in order to use motifs with identifiable features. Secondly, different variations of cutting and attachment methods were used, including iron mold production methods and presses.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.694-706
• /
• 2022

This study focusses on the development of a motion-sensing smart leggings prototype with the help of a module that monitors motion using a fiber-type stretch sensor. Additionally, it acquires data on Electrocardiogram (ECG), respiration, and body temperature signals, for the development of smart clothing used in online exercise coaching and customized healthcare systems. The research process was conducted in the following order: 1) Fabrication of a fiber-type elastic strain sensor for motion monitoring, 2) Positioning and attaching the sensor, 3) Pattern development and three-dimensional (3D) design, 4) Prototyping 5) Wearability test, and 6) Expert evaluation. The 3D design method was used to develop an aesthetic design, and for sensing accurate signal acquisition functions, wearability tests, and expert evaluation. As a result, first, the selection or manufacturing of an appropriate sensor for the function is of utmost importance. Second, the selection and attachment method of a location that can maximize the function of the sensor without interfering with any activity should be studied. Third, the signal line selection and connection method should be considered, and fourth, the aesthetic design should be reflected along with functional verification. In addition, the selection of an appropriate material is important, and tests for washability and durability must be made. This study presented a manufacturing method to improve the functionality and design of smart clothing, through the process of developing a prototype of motion-sensing smart leggings.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.761-768
• /
• 1999

This paper is studied to find the optimum condition of double-inlet Sirocco fan installed in an indoor PAC for low noise operation by the Taguchi method. The goal of this study is to obtain the best combination of each control factor which results in a desired flowrate of Sirocco fan with minimum variability. In this study, the parameter design of the Taguchi method is adopted for robust design by the dynamic characteristic analysis using orthogonal arrays and S/N ratios. The flowrate measurements are conducted by using a multiple-nozzle-type fan tester according to the orthogonal array L9($3^4$). The results of this study can be summarized as follows ; (i) The optimum condition of control factor is a set of where A is an inner to outer diameter ratio($D_1/D_2$), B is a width to outer diameter ratio($L/D_2$), C is a blade attachment angle(${\theta}$) and D is a number of blade(Z), (ii) The flowrate under the optimum condition satisfies the equation $y=0.0384{\cdot}M$ where M is a signal factor, namely number of revolution. The flowrate performance improves about 7.3% more largely as compared with the current condition, which results in about 35RPM reduction of number of revolution for the target flowrate $18.5m^3/min$, and (iii) The sensitivity analysis shows that the major factors in contribution to flowrate performance are A, B, and D ; the percentage contributions of each control factor are 44.01%(Z), 26.77%($D_1/D_2$) and 20.42%($L/D_2$).

• 대한가정학회지
• /
• 제45권2호
• /
• pp.91-103
• /
• 2007

The purpose of this study is to investigate the types and functions of brand labels on clothing. We surveyed the materials and manufacturing methods for brand labels by visiting the label stores and label manufacturers. 200 pieces of children's wear were surveyed. The label attributes that were studied were: the number of labels, the location of the labels, the attachment system for the labels, the color of the labels, the materials used to make the labels, manufacturing methods, and the size of the labels. From this investigation a brand label was classified into a main label and a point label. The main results were: 1. Materials such as fabrics, nonwovens, leather, suede, rubber, PVC, silicone, and metals are used for brand labels. The manufacturing methods for brand labels are weaving, printing, high frequency, heating, and molding. 2. More than 54% of clothes have more than two brand labels attached. This percentage exceeds the attaching of only one brand label in rate. An inside brand label is located at a certain place. This inside label uses only fabric material reflecting inherent brand color and design. The outside brand label is located at several places with consideration of the clothes design. This label uses various materials, colors, and characters matching with the clothes. As for the size, an inside label is mainly medium in size, whereas an outside label is small. 3. A brand label is classified into a main label (first label) and a point label (second label), which are defined as follows. A main label indicates the brand name and is located inside at a certain place using an inherent brand design and a fabric material. A point label is an additional label to express brand image and is located outside at various places for decoration using various characters and design and materials.

• 한국지진공학회논문집
• /
• 제8권3호
• /
• pp.87-96
• /
• 2004

최근에 수행된 보 플랜지 절취형 (Reduced Beam Section, RBS) 내진 철골모멘트접합부의 실험 결과에 의하면, 보 웨브를 볼트 접합한 시험체는 보 웨브를 용접 접합한 시험체에 비해서 조기에 스캘럽을 가로지르는 취성파단이 발생하는 열등한 내진성능을 보였다. 실험결과에 의할 때, 이러한 접합부 취성파괴가 발생하는 주요 원인은 웨브 볼트의 슬립과 고전 휨이론에 의한 예측과는 전혀 다른 응력 전달메카니즘에 의한 스캘럽 부근의 응력집중 때문으로 사료된다. 이는 고전 휨이론에 기초한 전통적 보 웨브 볼트접합부의 설계법을 재검토할 필요가 있음을 시사하는 것이다. 본 연구를 통하여 고전 휨이론에 기초한 현행의 보 웨브 설계법에 문제가 있음을 지적하였다. 실험 및 해석결과를 바탕으로 RBS 접합부의 실제 응력전달경로에 부합되는 새로운 보 웨브 볼트접합 설계법을 제안하였다.

• 디지털융복합연구
• /
• 제15권2호
• /
• pp.295-300
• /
• 2017

본 연구는 최근 급증하고 있는 1인 가구 내 개인이 직면할 수 있는 심리적 소외감을 해결할 수 있는 대안으로 인간과 정서적으로 소통할 수 있는 소셜로봇의 역할 탐색에 목적이 있다. 먼저 문헌연구를 통해 소셜로봇의 정의와 특징을 파악 후 소셜로봇의 현황과 미래 전망을 분석하였다. 이를 기반으로 향후 소셜로봇의 잠재적 수요자가 될 수도권에 거주하는 만 20세 이상 30세 이하의 1인 가구를 대상으로 심층인터뷰를 하여 사용자 경험 측면에서 소셜로봇에게 필요한 역할을 정리하였다. 그 결과 모든 실험자는 자신에게만 특화되어 상호작용할 수 있는 소셜로봇이 필요하다고 응답했으나, 로봇과의 애착 형성 필요성에 대해서는 개인마다 차이를 보였다. 이를 통해 개인별 생활 방식 및 성향 등에 따라 소셜로봇에게 요구하는 점이 다르다는 것을 파악하였다. 따라서 향후 소셜로봇이 인간의 삶 속에 자리매김하기 위해서는 개별 맞춤형 소셜로봇의 기술 개발과 사용자 경험 측면에서의 고려가 필요하다는 함의를 도출할 수 있었다.

• 교육시설 논문지
• /
• 제21권3호
• /
• pp.19-28
• /
• 2014

Student halls and their convenient facilities have been a focal point for various student activities at university campus. It has been for most of the student a place of unique memories and of attachment often associated with those good and bad school days. However, it is questionable whether these facilities are supportive and accessible for all of the students and other users including the handicapped. Therefore, based on the concept of UD(universal design) which was widely applied to U.S. institutions, this study intended to evaluate student hall facilities in U.S. and to provide an improvement direction for Korean UD application. For that purpose, four universities were selected for an in-depth analysis and 76 survey indices were utilized based on previous research. It was found that (1) design consideration without braille sign for VIP(visually impaired person) in student buildings can be differently approached with electronic devices; (2) the best demonstration of UD in student buildings can be seen in spacious flat pathway, easy access through ramp and wide entry area, necessary for people in wheel-chairs, but used by all, implying an increase of the ratio of public space; (3) one of the good UD features is an attractive physical environment rather than institutional appearance, in which they ultimately will support and completely adaptable at optimal levels by everyone; (4) consistent maintenance and management maximize the potential of UD principles and minimize physical limitations.