• 한국농촌건축학회논문집
• /
• 제15권1호
• /
• pp.107-113
• /
• 2013

The purpose of this study is to analyze the usage of the attached facilities of the church for the community services according to the church size. For the questionnaire 50 pasters who are in charge of the church that has over 300 church members were selected in Daejeon Chungnam Province. The results of this study were as follows; the kinds of attached facilities of the church do not increase by the church size, but in case of the middle size and the big size churches, the pressure of opening the attached facilities of the churches is stronger than that of small size churches. Almost all the pasters want to open the attached facilities of the churches for the community services, but the expectation of the result were different by the church size. Most of the pasters of the small size and big size churches think that the attached facilities of the church were very important for the growth of the church. Otherwise most of the pasters of the middle size churches do not agree with it.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.143-160
• /
• 1996

The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.

• 화훼연구
• /
• 제17권4호
• /
• pp.256-261
• /
• 2009

본 연구는 하국용으로 가장 많이 재배되고 있는 '백선' 품종의 플러그 묘 생산에 있어서 삽수의 조건이 묘의 지상부 생육과 발근 및 절화생육에 미치는 영향을 알아보고자 실시하였다. 삽수에 부착된 엽수가 많을수록 묘의 지상부 생육과 발근이 양호하였다. 삽수 길이에 따른 지상부 생육에는 큰 차이가 없었으나, 발근은 삽수 길이가 5cm 이상인 처리에서 양호하였다. 삽수의 굵기가 굵을수록 지상부의 생체중이 무거웠으며, 굵기가 5.5 mm 처리에서 형성된 뿌리수가 가장 많았다. 삽수에 부착된 엽수가 많을수록 절화장이 길었고, 절화무게도 무거웠다. 삽수의 길이가 7~11 cm 처리에서 절화장, 절화무게, 엽수, 설상화수 등 절화의 생육이 양호하였다. 삽수 굵기가 5.5 cm 처리에서 다른 처리에 비해 절화 생육이 우수하였다. 띠라서 '백선' 플러그 묘 생산시 굵기가 5.5 mm 정도의 7cm 길이의 삽수에 잎을 4장 부착하여 삽목하는 것이 묘의 생육 및 발근에 효과적이고, 정식 후 절화의 생육에도 적합하였다.

• Carbon letters
• /
• 제14권4호
• /
• pp.228-233
• /
• 2013

In this work, we report in-situ observations of changes in catalyst morphology, and of growth termination of individual carbon nanotubes (CNTs), by complete loss of the catalyst particle attached to it. The observations strongly support the growth-termination mechanism of CNT forests or carpets by dynamic morphological evolution of catalyst particles induced by Ostwald ripening, and sub-surface diffusion. We show that in the tip-growth mode, as well as in the base-growth mode, the growth termination of CNT by dissolution of catalyst particles is plausible. This may allow the growth termination mechanism by evolution of catalyst morphology to be applicable to not only CNT forest growth, but also to other growth methods (for example, floating-catalyst chemical vapor deposition), which do not use any supporting layer or substrate beneath a catalyst layer.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.511-513
• /
• 2003

Hydroxyl groups were introduced onto the surface of a silicon wafer by O$_2$ plasma treatment. Poly(l-lactide) (1-PLA) was attached onto the surface-modified silicon wafer by the ring-opening polymerization of l-lactide using the hydroxyl group as an initiator. Lamellar single crystals of 1-PLA were grown directly on the 1-PLA-attached silicon wafer from a 0.025% solution in acetonitrile at 5$^{\circ}C$. A well-separated, lozenge-shaped, monolayered lamellar single crystal was prepared because the 1-PLA-attached silicon wafer acts as an initial nucleus.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.87-93
• /
• 2005

In this paper, we analyzed ignition characteristics of combustible material and the waveform of power dissipation, voltage and current by poor contact. And the surface structure of plug by poor contact was analyzed. In the results of experiment, the heat generated by poor contact and ignited the combustible material on power cord sets. The insulation material was molten and carbonized by the heat conduction though plug pit and voids were formed inside of insulation material. The waveform of voltage and power dissipation distorted because of a growth of oxidation by poor contact. In particular, in case that load was big load, the waveform of voltage and power dissipation severely distorted as with the passage of time. The surface of plug pin was changed from erosion mark to welding mark according to big load. The results will be applied to the cause analysis of electrical disaster.

• ETRI Journal
• /
• 제36권3호
• /
• pp.450-459
• /
• 2014

In this paper, we present a new, easy-to-generate system that is capable of creating virtual 3D tree models and simulating a variety of growth processes of a tree from a single, real tree image. We not only construct various tree models with the same trunk through our proposed digital image matting method and skeleton-based abstraction of branches, but we also animate the visual growth of the constructed 3D tree model through usage of the branch age information combined with a scaling factor. To control the simulation of a tree growth process, we consider tree-growing attributes, such as branching orders, branch width, tree size, and branch self-bending effect, at the same time. Other invisible branches and leaves are automatically attached to the tree by employing parametric branch libraries under the conventional procedural assumption of structure having a local self-similarity. Simulations with a real image confirm that our system makes it possible to achieve realistic tree models and growth processes with ease.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.728-733
• /
• 2006

The equilibrium or growth shape of ceramic materials is classified largely into two categories according to the thermodynamic conditions imposed. One is a polyhedral shape where the surface free energy is anisotropic, and the other a spherical shape where the surface free energy is isotropic. In the case of grains with a polyhedral shape of anisotropic surface free energy, socalled abnormal grain growth usually takes place due to a significant energy barrier for a growth unit to be attached to the crystal surface. In the case of grains with a spherical shape of isotropic surface free energy, however, normal grain growth with a uniform size distribution takes place. In this contribution, the state-of-the-art of our current understanding of the relationship between the crystal shape and the microstructure evolution during the sintering of ceramic materials in the presence of a liquid phase was discussed.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.39-49
• /
• 1998

In this work, fatigue tests by axial loading were carried out to investigate the effect of stress ratio on the growth behaviors of surface fatigue crack for SM45C steel and Al 2024-T4 alloy. The growth behaviors of surface crack have been monitored during fatigue process by measuring system attached CCTV and monitor. When the growth rates of surface crack were investigate by the concept of LEFM based on Newman-Raju's .DELTA.K, the dependence of stress ratio appears both SM45C steel and Al 2024-T4 alloy. Therefore, modified stress intensity factor range, .DELTA.K' [=(1+R)/sup n/.DELTA.K] are intorduced to eliminate the dependence of stress ratio. Using .DELTA.K', it is found that the dependence of stress ratio disappears both SM45C steel and Al 2024-T4 alloy.

• 대한환경공학회지
• /
• 제29권4호
• /
• pp.452-459
• /
• 2007

부유 및 부착성장 미생물을 이용한 접촉안정형 영양염류처리 하이브리드공정은 질산화 반응조내에 EPS(Expanded Poly-Styrene) 여재를 충진하여 autotrophs와 heterotrophs의 분리성장과 질산화균의 우점화를 도모함으로써 수리학적체류시간 6시간 이내에서도 양호한 처리수질을 얻을 수 있는 공정이다. 본 공정의 운전결과 방류수의 $BOD_5,\;COD_{Mn}$, SS의 평균농도는 5.2 mg/L, 7.3 mg/L, 4.9 mg/L이었으며, T-N 및 T-P농도는 6.8 mg/L 및 0.6 mg/L로서 양호한 처리 결과를 얻을 수 있었다. 또한 본 공법의 평균 제거효율은 $BOD_5,\;COD_{Mn}$, SS의 경우 94.6%, 79.8%, 94.9%이었으며, T-N 및 T-P로서 70.8% 및 76.9%로 나타났다. EPS 여재에 부착된 부착미생물 군집의 16S-rRNA 분석결과 ammonia-oxidizing bacteria로 알려진 Nitrosomonas속, Nitrosoccus속, Gallionella속이 포함된 cluster가 EPS 여재에 부착된 biofilm의 6% 정도인 것으로 조사되었다. 결과적으로 질산화미생물의 우점화를 통해 질산화 반응시간을 단축시킴으로서 6시간 이내의 짧은 수리학적 체류시간에서도 T-N 및 T-P농도를 10 mg/L 및 1.0 mg/L 이하로 처리할 수 있었던 것으로 사료된다.