• 전기화학회지
• /
• 제25권4호
• /
• pp.134-153
• /
• 2022

리튬이온전지의 에너지밀도가 지속적으로 높아지고 사용환경이 가혹해지고 있지만, 전지의 안전성은 타협할 수 있는 특성이 아니다. 특히, 더 높은 에너지밀도 확보를 위해 고용량 전극 소재 개발과 함께 분리막 원단 뿐만 아니라 세라믹 코팅층의 두께 및 무게의 박막화와 경량화가 동시에 요구되고 있다. 그 중, 기존 슬러리 코팅 방식을 증착 방식으로 대체하는 기술이 주목받고 있으며, 분리막의 내열성 확보를 위해 도입된 수 ㎛ 수준의 세라믹 코팅층을 nm 수준으로 박막/경량화 하면서도 동등의 내열성을 확보하는 시도가 진행되고 있다. 증착법으로 제조된 세라믹 코팅 분리막은 리튬이온전지 에너지밀도를 크게 증가시킬 수 있는 효율적인 방법이지만, 균일한 물성의 세라믹 코팅 분리막을 제작하기 위해서는 증착 공정 중 온도를 제어해야 하며, 생산속도와 공정비용을 기존 슬러리 코팅 수준으로 떨어뜨려야 하는 현실적 문제가 존재한다. 그럼에도 불구하고, 분리막 원단 대비 두께 및 무게 증가가 거의 없다는 점에서는 전지의 고에너지밀도 달성에 필요한 매력적인 접근법임은 분명하다. 본 총설에서는 세라믹 증착 코팅에 사용되고 있는 세 가지 방법인 1) 화학적 기상 증착법, 2) 원자층 증착법, 그리고 3) 물리적 기상 증착법으로 제조된 세라믹 코팅 분리막을 소개하고자 한다. 각 증착법의 원리와 장/단점을 설명하고, 제조된 세라믹 코팅 분리막의 물리적, 전기화학적 특성 및 전지의 성능 변화를 비교 분석하였다. 또한, 소재 관점에서 금속 또는 유기물질이 코팅된 초박막 코팅 분리막의 기술 동향도 소개하였다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.400-402
• /
• 2002

We collected seeds of Solidago virgaurea plants growing at different altitudes on the Mt Hakusan area in Japan and cultivated them in a naturally-lit green house. Three-week-old seedlings were irradiated with supplemental UV-B for 12 h each day for 1 and 2 weeks. After a week of itradiation the seedlings of the population collected from the higher altitude at Oh-nanjiho (ON) had accumulated more anthocyanins than those from the lower altitude at Bettoh-deai (BD). Levels of anthocyanins in the ON seedlings were highly correlated with the dose of UV-B radiation and the correlation was also observed after 2 weeks. The growth of the third leaves was retarded by UV-B radiation in both populations. The extent of growth retardation in the third leaves was correlated with the dose of UV -B radiation in both populations. However, no significant difference in the extent of leaf area growth was observed between the ON and BD populations. The increase in plant fresh weight was extensively inhibited in the ON seedlings after 1 week of UV-B radiation. The inhibition was recovered to those in the BD population by 2 weeks irradiation. These results indicate that these populations respond differentially to supplementary UV -B radiation during the first week. Because flavonoids such as anthocyanins play an important role in protection against UV-B radiation in many plants, populations growing at higher altitude may be better able to adapt to increased global levels of UV-B radiation.

• 한국자원식물학회지
• /
• 제25권6호
• /
• pp.731-738
• /
• 2012

Dandelion has been widely utilized for medicinal and edible purposes. This research was conducted to evaluate the effect of supplemental LED (light-emitting diode) light on germination, growth characteristics and anthocyanin content of dandelion (Taraxacum officinale) seedling using LED blue (460 nm), red (660 nm, R), blue + red (B:R=6:4) and fluorescent lamp light treatment. By LED illumination to T. officinale seed germination speed was delayed, and germination rate was the highest in the fluorescent light. The growth characteristics (plant height, number of leaves, root length and fresh weight) were greatly influenced by supplemental LED light compared with control treatment, and the growth promotion was the most effective in the red LED illumination. After 60 days of red and mixed LED light treatments, anthocyanin content of dandelion plants was significantly changed. The anthocyanin content was increased by 12~19 mg/100 g under the red LED and the mixed light conditions compared with the control and the blue LED. Results indicate that illumination with red and mix LEDs, compared with other light treatments, is beneficial for promotion of growth and anthocyanin content in dandelion.

• Computers and Concrete
• /
• 제11권2호
• /
• pp.93-104
• /
• 2013

The use of rock wool waste, an industrial by-product, in cement-based composites has positive effects on the environment because it reduces the problems associated rock wool disposal. The experiments in this study tested cement-based composites using various rock wool waste contents (10, 20, 30 and 40% by weight of cement) as a partial replacement for Portland cement in mortars. The pozzolanic strength activity test, flow test, compressive strength test, dry shrinkage test, absorption test, initial surface absorption test and scanning electron microscope observations were conducted to evaluate the properties of cement-based composites. Test results demonstrate that the pozzolanic strength activity index for rock wool waste specimens is 103% after 91 days. The inclusion of rock wool waste in cement-based composites decreases its dry shrinkage and initial surface absorption, and increases its compressive strength. These improved properties are the result of the dense structure achieved by the filling effect and pozzolanic reactions of the rock wool waste. The addition of 30% and 10% rock wool wastes to cement is the optimal amount based on the results of compressive strength and initial surface absorption for a w/cm of 0.35 and 0.55, respectively. Therefore, it is feasible to utilize rock wool waste as a partial replacement of cement in cement-based composites.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.174-179
• /
• 2017

We designed the CMOS analog integrate and fire (I&F) neuron circuit for driving memristor based on resistive-switching random access memory (RRAM). And we fabricated the RRAM device that have $HfO_2$ switching layer using atomic layer deposition (ALD). The RRAM device has gradual set and reset characteristics. By spice modeling of the synaptic device, we performed circuit simulation of synaptic device and CMOS neuron circuit. The neuron circuit consists of a current mirror for spatial integration, a capacitor for temporal integration, two inverters for pulse generation, a refractory part, and finally a feedback part for learning of the RRAM. We emulated the spike-timing-dependent-plasticity (STDP) characteristic that is performed automatically by pre-synaptic pulse and feedback signal of the neuron circuit. By STDP characteristics, the synaptic weight, conductance of the RRAM, is changed without additional control circuit.

• Applied Biological Chemistry
• /
• 제15권1호
• /
• pp.7-17
• /
• 1972

전국(全國) 12도시(都市)의 15개(個) 시장(市場)에서 수집(蒐集)한 감자, 무우, 배추와 기타(其他) 10종(種)의 채소등(菜蔬等) 총(總) 151점(點)의 객관적(客觀的) 시료(試料)에 대(對)한 Heptachlor잔류분(殘留分)의 수준(水準)을 gas chromatograph로 분석(分析)하였다. Heptachlor 및 Heptachlor epoxide의 분석감도(分析感度)는 0.001 p.p.m. 였고, 식품중(食品中) 양(兩) 잔류성분(殘留成分)의 화(和)를 Heptachlor잔류분(殘留分)(p.p.m.)으로 하였다. 공시채소(供試菜蔬)의 Heptachlor오염(汚染)이 광범(廣範)한데 반(反)하여, 전체적(全體的)인 Heptachlor 잔류분(殘留分)의 수준(水準)은 낮은 결과(結果)를 보여 주어, FAO/WHO의 합동전문위원회(合同專門委員會)가 권장한 식품중(食品中) Heptachlor잔류허용한계(殘留許容限界)에 훨씬 미달(未達)하였다.

• The Korean Journal of Ecology
• /
• 제27권1호
• /
• pp.15-20
• /
• 2004

With attention to different human activities around Anzali wetland and introduction of different pollutants containing heavy metals into this water ecosystem and absorption and accumulation of heavy metals in shell and muscle of Astacus leptodactylus which is native benthose of Anzali wetland and enjoys food and economic importance; Sampling of waters and sediments from 18 stations and shell and muscle of Astacus leptodactylus from 5 stations had been conducted. After biometric evaluation of Astacus leptodactylus, the chemical analysis of the samples by using international and standard methods and then their heavy metals content was determined by Atomic Absorpotion Spectrophotometer (AAS), model P.U 9400 philips. Result of the analysis stated that; 1) The mean values of Cr, Zn, Pb, Ni, V in Anzali waters were 6.4, 184.5, 28.8, 28.9, 47.1 ($\mu$ gr/lit) respectively, which comparing to the international standards, is not suitable for drinking, but it can be used for agricultural and aquacultural purposes. Even though the concentration of heavy metals in sediments were high, there are in range of acceptable limit for aquatics organisms; 2) Comparatively, the concentration of heavy metals in shell and muscle of Astacus leptodactylus in Anzali wetland (Cr, Zn, Pb, Ni, V in shell were 3.48, 109.3, 14.13, 7.17, 36.2 and in muscle were 2.98, 131.98, 3.12, 4.77, 9.05 ppm respectively) were more than what is determined for Aras dam (in shell were 1.6, 224.3, 7.8, 7.6, 10.3 and in muscle were 1.4, 60.2, 0.45, 2.7, 4.4 mg/kgr respectively); 3) For all samples, concentration of heavy metals in all Astacus leptodactylus in Anzali wetland and Aras dam, was at tolerance level for human consumption; 4) There was no association with significant difference between weight and size of Astacus leptodactylus with absorption and accumulation of heavy metals; but there was a significant association between heavy metals content in water and in sediments, and in sediments, shell and muscle of Astacus leptodactylus in Anzali wetland.

• Composites Research
• /
• 제16권4호
• /
• pp.44-50
• /
• 2003

균열선단에 발생하는 손상역은 재료의 파괴인성 메카니즘을 알 수 있게 하는 중요한 영역이다. 본 연구에서는 고무변성 에폭시 수지의 균열선단 손상역의 생성 및 성장 과정을 음향방출법을 이용하여 조사하였다. 고무변성 에폭시 수지의 고무함량은 5 wt%와 15 wt%로 하였고, 3점 굽힘시험편을 사용하여 모드 I 파괴시험에 대한 각 시험편의 파괴인성값을 구하였다. 또한, 균열선단의 손상역과 그 내부의 고무입자 변형상태를 편광현미경과 원자력간 현미경을 사용하여 관찰하였다. 고무변성 에폭시 수지의 균열선단부의 손상역은 파괴하중의 약 13 % 하중에서 생성이 되어, 약 57 % 하중까지 균열개시 없이 성장하였다. 57 % 하중 근처에서 개시만 균열은 최대하중부근까지 고착-활강거동을 반복하면서 안정 / 불안정 파괴로 진전하였다 이 과정에서 발생한 음향방출신호의 시간-주파수 분석결과, 고투입자 내부에서의 케비테이션 생성단계에서 주파수대역은 0.15 ∼ 0.20 MHz 이었고, 그 후의 안정 및 불안정시의 주파수 대역은 0.20∼0.30MHz 이었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권2호
• /
• pp.269-274
• /
• 2017

본 연구에서는 기존의 납을 대체할 수 있는 의료방사선 차폐시트 적용을 위해 몬테카를로 시뮬레이션을 이용하여 각각에 대한 원소별 차폐능을 모의 추정하였다. 원소들의 선정은 차폐성능이 큰 것으로 알려진 원자번호가 큰 원소와 금속원소를 중심으로 최근에는 다양한 복합재들이 차폐성능을 향상시킨다는 보고에 따라 경량화, 가공성, 활동성 등을 고려하여 21개 원소를 선정하였다. 몬테카를로 시뮬레이션 코드를 이용한 전산모사 투과도 실험으로 21개의 원소를 대상으로 시뮬레이션 하여 추정한 결과 납을 대체할 차폐물질로 적당한 원소의 투과율은 텅스텐(w) 98.82％, 가돌리늄(Gd) 92.96％, 주석(Sn) 86.87％, 인듐(In) 86.38％, 안티몬(Sb) 86.33％, 바륨(Ba) 78.51%로 평가되었으며, 각 원소별 차폐성능을 모의 추정한 결과 텅스텐과 금이 98.82%와 98.44%로 차폐율이 가장 높은 것으로 추정되었다. 경제성과 가공성을 고려할 때 위 원소를 화합한 물질로 차폐체를 만드는 것이 적절할 것으로 사료된다.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.161-167
• /
• 2011

The stress-strain responses and oxidation properties of cold-rolled Zr-1.5Nb-O and Zr-1.5Nb-O-S alloys were studied. The U.T.S. (ultimate tensile strength) of cold-rolled Zr-1.5Nb-O-S alloy with 160 ppm sulfur (765 MPa) were greater than that of Zr-1Nb-1Sn-0.1Fe alloy (750 MPa), achieving an excellent mechanical strength even after the elimination of Sn, an effective solution strengthening element. The addition of sulfur increased the strength at the expense of ductility. However, the ductile fracture behavior was observed both in Zr-Nb-O and Zr-Nb-O-S alloys. The beneficial effect of sulphur on the strengthening was observed in the cold rolled Zr-1.5Nb-O-S alloys. The activation volume of cold-rolled Zr-1.5Nb decreased with sulfur content in the temperature region of dynamic strain aging associated with oxygen atoms. Insensitivity of the activation volume to the dislocation density and the decrease of the activation volume at a higher temperature where the dynamic strain aging occurs support the suggestion linking the activation volume with the activated bulge of dislocations limited by segregation of oxygen and sulfur atoms. The addition of sulfur was also found to improve the oxidation resistance of Zr-Nb-O alloys.