• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.819-826
• /
• 2020

The method of the Laplace transform has been used to obtain an analytical solution of the three-dimensional steady state advection diffusion equation for the airborne radionuclide release from any nuclear installation such as the power reactor in an area source. The present treatment takes into account the removal of the pollutants through the nuclear reaction. We assume that the pollutants are emitted as a constant rate from the area source. This physical consideration is achieved by assuming that the vertical eddy diffusivity coefficient should be a constant. The prevailing wind speed is a constant in 𝑥- direction and a linear function of the vertical height z. The present model calculations are compared with the other models and the available data of the atmospheric dispersion experiments that were carried out in the nuclear power plant of Angra dos Reis (Brazil). The results show that the present treatment performs well as the analytical dispersion model and there is a good agreement between the values computed by our model and the observed data.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.905-907
• /
• 2014

The plasma and microwave surface treatments of carbon nanotubes that loaded on plastic substrates were carried out with expecting a change of carbon nanotube dispersion by increasing treatment time. The microwave treatment process was undergone by commercial microwave oven (800 W). The electrical property was measured by hall measurement and resistance was increased by increasing $O_2$ flow rate of plasma, suggesting an improvement of carbon nanotube dispersion and a possibility of controlling the resistances of carbon nanotubes by plasma surface treatment. The resistance was increased in both polyethylene terephthalate and polyimide substrates by increasing $O_2$ flow rate. Resistance changes only slightly with different $O_2$ flow treatment in measure rho for all polyimide samples. Sheet resistance is lowest in polyimide substrate not due to high carbon nanotube loading but due to tendency to remain in elongated structure. $O_2$ or $N_2$ plasma treatments on both polyethylene terephthalate and polyimide substrates lead to increase in sheet resistance.

• Atmosphere
• /
• v.19 no.4
• /
• pp.309-318
• /
• 2009

Vulnerability to heat was examined for populations of 6 major cities in South Korea (Seoul, Incheon, Daejeon, Gwangju, Daegu, and Busan). Daily excess mortality and maximum temperature from 1991 to 2005 were employed in this study. The results show that the standardized mortality increase associated with a $1^{\circ}C$ increase in daily maximum temperature above the city-specific threshold explains the heat acclimatization effect better than the threshold temperature itself. The estimated increase in mortality (standardized per 10 million population) associated with a $1^{\circ}C$ increase in temperature above the threshold is 4.8 in Incheon, 4.7 in Seoul, 4.3 in Daejeon, 2.8 in Gwangju, 2.4 in Daegu, and 1.5 in Busan, well reflecting the latitudinal locations and local climates of each city. Climate models project more frequent, more intense, and longer lasting heat waves in most land areas in both hemispheres in the 21st century under increasing greenhouse gas concentrations. In order to mitigate the adverse human health impacts due to excess heat, more detailed characteristics of acclimatization to heat need to be understood and quantified.

• Atmosphere
• /
• v.18 no.4
• /
• pp.355-365
• /
• 2008

Synoptic and climatological characteristics of heat waves over Korea and Europe as well as their biometeorological impacts were compared. In July of 1994, excess deaths of about 2,388 in the population of South Korea are estimated by the modified excess death calculation algorithm ofKysely (2004). The excess deaths correspond to the net mortality increase of 12.5% in July of 1994 if we compare the estimated value to the expected number of deaths in this month (i.e., about 19,171). The comparative study of heat waves in Korea and Europe shows that the record-breaking heat waves in both regions are closely associated with prolonged droughts. In particular, reduction of soil moisture, precipitation and cloud cover and enhancement of insolation during the drought periods are very likely to be related to the increase in the intensity and the duration ofheat waves. Climate models predict that the frequency, intensity, and duration of heat waves in the 21 st century will be greatly enhanced in both areas. In order to reduce the biometeorological and socioeconomic impacts due to heat waves, not only the development of heat-related mortality prediction model that can be widely applied to many climate regimes, but also studies on the climatological association between extreme temperatures and abnormal hydrological cycle are needed.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.63-71
• /
• 2005

Equilibrium geometries, electronic structures, and energies of borocarbon clusters (binary compounds of carbon and boron), an unexplored class of molecules with highly unusual characteristics and potential for further development, have been investigated by means of B3LYP/6-311+G$^*$ density functional theory computations. A large number of B$_7$C${_1}^{1-}$, B$_6C_2$, and B$_5C_{3}\,^{1+}$ clusters with planar and non-planar monocyclic and polycyclic rings, as well as cage structures, have been systematically studied. Unexpectedly, planar forms are predicted not only to be the most stable structures, but also, in many cases, to have unprecedented planar heptacoordinate boron (p-heptaB) and planar heptacoordinate carbon (p-heptaC) arrangements. All these pheptaB and p-heptaC have 6π electrons and are aromatic according to the nucleus independent chemical shift (NICS). This novel bonding pattern is analyzed in terms of natural bond orbital (NBO) analysis. For virtually all possible B$_7$C${_1}^{1-}$, B$_6C_2$, and B$_5C_{3}\,^{1+}$ combinations, the p-heptaB arrangements are the more stable than other type structures.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.65-68
• /
• 2007

FORMOSAT-3 was launched in April of 2006. It consists of six low earth orbit (LEO) satellites that will be eventually deployed to an orbit at 800 km height. Its scientific goal is to utilize the radio occultation (RO) signals to measure the bending angles when the GPS signals transect the atmosphere. The bending angle is then used to infer atmospheric parameters, including refractivity, temperature, pressure, and relative humidity fields of global distributions through inversion schemes and auxiliary information. The expected number of RO events is around 2500 per day, of which 200 events or so fall into the polar region. Consequently, the FORMOSAT-3 observations are expected to play a key role to improve our knowledge in the weather forecasting and space physics research in the polar region. In this paper, we use temperature profiles retrieved from FORMOSAT-3 RO observations to study the climatology of gravity wave activity in the polar region. FORMOSAT-3 can provide about 200 RO observations a day in the polar region, much more than previous GPS RO missions, and, hence, more detailed climatology of gravity wave activity can be obtained.

• Atmosphere
• /
• v.26 no.2
• /
• pp.289-299
• /
• 2016

Optical properties of aerosols associated with haze events over Seoul were examined using ground-based skyradiometer and satellite-borne CALIOP and MODIS measurements over the 2009~2010 period. It is shown that aerosol optical thickness (AOT), ${\AA}ngstr{\ddot{o}}m$ exponents (${\alpha}$), and fine-mode particles increase during the haze events. The CALIOP-measured vertical profiles of aerosol during the haze events revealed that most of aerosols are loaded within layers below 4 km altitude. A large portion of these events appear to be related to the long-range transport of aerosols from China; about 35% and 18% of the haze events observed over Seoul were traced back to northern China and southern China, respectively. Compared with optical properties for locally-induced haze events (25%), these long-range transported aerosols are found to have relatively higher AOTs.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.139.1-139.1
• /
• 2012

Wilson and Bappu (1957) found a significant relationship (WBR) between the absolute magnitude ($M_v$) and the width of the Ca II K emission line (W) for late type stars. In this study, we revisit the WBR to claim that WBR can be an excellent indicator of stellar surface gravity. We analyze 95 high-resolution spectra of G, K and M type stars obtained with UVES and BOES. WBR found in this work is $M_v$=34.22-18.34logW. In addition, stellar atmospheric parameters ($T_{eff}$, logg, [Fe/H], ${\xi}_{tur}$) are determined with the MOOG code and the Kurucz ATLAS9 model grids for G and K type stars. For M type stars, the method of Belle et al. (1999) is used to derive effective temperature which shows good agreement with other methods. Using the derived $T_{eff}$ and the measured logW,we find the relationship between logg and [logW, logT]; ${\log}g-_{fit}=-25.051-5.527{\log}W+10.254{\log}T_{eff}$. This relation can be applied to estimate the surface gravity of M type stars, which is difficult to be determined by other methods.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2452-2463
• /
• 2018

Surface treatment of sol-gel bioglass is required to increase its biomedical applications. In this study, a dielectric barrier discharge (DBD) plasma treatment in atmospheric pressure was performed on the surface of [$SiO_2-CaO-P_2O_5-B_2O_3$] sol-gel derived glass. The obtained bioglass was treated by plasma using discharge current 12 mA with an exposure period for 30 min. The type of discharge can be characterized by measuring the discharge current and applied potential waveform and the power dissipation. Apatite formation on the surface of the DBD-treated and untreated samples after soaking in simulated body fluid (SBF) at $37^{\circ}C$ is characterized by Fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), inductively coupled plasma (ICP-OES) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM/EDS). We observed a marked increase in the amount of apatite deposited on the surface of the treated plasma samples than those of the untreated ones, indicating that DBD plasma treatment is an efficient method and capable of modifying the surface of glass beside effectively transforming it into highly bioactive materials.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.219-225
• /
• 2018

Cosmic rays are ions that move at relativistic speeds. They generate secondary cosmic rays by successive collisions with atmospheric particles, and then, the secondary particles reach the ground. The secondary particles are mainly neutrons and muons, and the neutrons are observed by the ground neutron monitor. This study compared the diurnal variation in cosmic ray intensity obtained via harmonic analysis and that obtained through the pile-up method, which was examined in a previous study. In addition, we analyzed the maximum phase of the diurnal variation using four neutron monitors with a cutoff rigidity below approximately 6 GV, located at similar longitudes to the Oulu and Rome neutron monitors. Expanding the data of solar cycles 20-24, we examined the time of the maximum cosmic ray intensity, that is, the maximum phase regarding the solar cyclic modulation. During solar cycles 20-24, the maximum phase derived by harmonic analysis showed no significant difference with that derived by the pile-up method. Thus, the pile-up method, a relatively straightforward process to analyze diurnal variation, could replace the complex harmonic analysis. In addition, the maximum phase at six neutron monitors shows the 22-year cyclic variation very clearly. The maximum phase tends to appear earlier and increase the width of the variation in solar cycles as the cutoff rigidity increases.