• Journal of Environmental Science International
• /
• v.29 no.12
• /
• pp.1153-1170
• /
• 2020

With global warming and the rapid increase in urbanization accompanied by a concentration of population, the urban heat island effects (UHI) have become an important environmental issue. In this study, rooftop greening and permeable asphalt pavement were selected as measures to reduce urban heat island and applied to a simple virtual urban environment to simulate temperature change using ENVI-met. A total of five measures were tested by dividing the partial and whole area application of each measure. The results showed that the temperature range of the base experiment is 33.11-37.11 ℃, with the UTCI comfort level described as strong heat and very strong heat stress. A case applied permeable asphalt has a greater temperature difference than a rooftop greening case, the larger the area where each condition was applied, the greater the temperature change was.

• Corrosion Science and Technology
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2022

The use of cathodic protection for metals can be achieved by sacrificial anode CP or impressed current CP, or a combination of both. Cathodic protection is a highly effective anti-corrosion technique for submerged metals or metals in soil. But because the non-immersion atmospheric automobile environment is a high resistance environment, it is limited by fundamental cathodic protection. However, the application of cathodic protection to automobiles is attractive because of the possibility of maintaining corrosion resistance while using lower-cost materials. A commercially available product for automobiles that uses both sacrificial anode CP and impressed current CP was tested in a periodic salt spray environment to investigate the performance of the devices. Experimental results show that the metal to be protected has different anti-corrosion effects depending on the distance from the anode of the device, but it is effective for the entire 120 cm long specimen exposed with one anode. The cathodic protection is effective because the conductive tape attached to the anode of the structure to be protected acts as a constant electrolyte in wet and dry conditions. The results show that the entire standard passenger car can be protected by cathodic protection with 4 anodes.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.243-251
• /
• 2021

Real-Time Kinematic (RTK) is a phase-based differential GNSS technique and uses additional observations from permanent reference stations to mitigate or eliminate effects like atmospheric delays or satellite clocks and orbit errors. In particular, as the position accuracy required in the fields of autonomous vehicles and drones is gradually increasing, the demand for RTK-based precise navigation that can provide cm-level position is increasing. Recently, with the rapid growth of the open-source software market, the use of open-source software for building navigation system of unmanned vehicles, which is difficult to mount an expensive GNSS receivers, is gradually increasing. RTKLIB is an open-source software package that can perform RTK positioning and is widely used for research and education purposes. However, since the performance and stability of RTK algorithm of RTKLIB is inevitably inferior to that of commercial GNSS receivers, users need to verify whether RTKLIB can satisfy the navigation performance requirements of unmanned vehicles. Therefore, in this paper, the performance evaluation of the RTK positioning algorithm of RTKLIB was performed using GNSS observation data acquired in a dynamic environment. Therefore, in this paper, the RTK positioning performance of RTKLIB was evaluated using GNSS observation data acquired in a dynamic environment. Our results show that the current RTK algorithm of RTKLIB is not suitable for precise navigation of unmanned vehicles.

• Journal of Powder Materials
• /
• v.29 no.1
• /
• pp.41-46
• /
• 2022

In this study, we report the microstructure and characteristics of Ag-SnO₂-Bi₂O₃ contact materials using a controlled milling process with a subsequent compaction process. Using magnetic pulsed compaction (MPC), the milled Ag-SnO₂-Bi₂O₃ powders have been consolidated into bulk samples. The effects of the compaction conditions on the microstructure and characteristics have been investigated in detail. The nanoscale SnO₂ phase and microscale Bi2O3 phase are well-distributed homogeneously in the Ag matrix after the consolidation process. The successful consolidation of Ag-SnO₂-Bi₂O₃ contact materials was achieved by an MPC process with subsequent atmospheric sintering, after which the hardness and electrical conductivity of the Ag-SnO₂-Bi₂O₃ contact materials were found to be 62-75 HV and 52-63% IACS, respectively, which is related to the interfacial stability between the Ag matrix, the SnO₂ phase, and the Bi₂O₃ phase.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.70-75
• /
• 2002

The penetration potential of TIG welding in one single run is limited, though the process itself generates high quality welds with good weld cosmetics. This is one of the main reasons, which has contributed to its development in high duty applications such as those encountered in aeronautical, aerospace, nuclear & power plant applications. For these applications, stainless steels, titanium k nickel based alloys are most often used. As these materials remain very sensible to weld heat input k atmospheric pollution, stringent processing conditions are imposed. For example welding of titanium alloys requires argon shielding of weld zone and for 5 mm thick plates multi-pass runs & filler additions are required. This multi-run operation not only raises the welding cost, but also increases defect risks. In recent years, extensive interest has been raised by the possibility to increase weld penetrations through flux applications & the process is designated ATIG-activated TIG, or FBTIG-flux bounded TIG. The improved welding performance of such flux assisted TIG is related to arc constriction and surface tension effects on weld pool. The research work by authors has lead to the formulation of welding fluxes for stainless steels k titanium alloys with TIG Process. These fluxes are now commercialized & some applications in industry have already been carried out. FBTIG for aluminum has been proposed with silica application for AC mode TIG welding. The paper highlights the fundamentals of flux role in TIG welding and illustrates some industrial applications.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.282-299
• /
• 2024

Target detection (TD) is a research hotspot in the field of hyperspectral imaging (HSI). Traditional TD methods often mine targets from HSIs under a single imaging condition, without considering the influence of imaging conditions. In fact, the spectra of ground objects in HSIs are uncertain and affected by the imaging conditions (weather, atmospheric, light, time, and other angle conditions including zenith angle). Hyperspectral data changes under different imaging conditions. Therefore, the detection result for a single imaging condition cannot accurately reflect the effectiveness of the detection method used. It is necessary to analyze the performance of various detection methods under different imaging conditions, to find a more applicable detection method. In this paper, we study the performance of TD methods under various land-based imaging conditions. We first summarize classical TD methods and evaluation methods. Then, the detection effects under various imaging conditions are analyzed. Finally, the concepts of the stability coefficient (SC) and effective area under the curve (EAUC) are proposed to comprehensively evaluate the applicability of detection methods under land-based imaging conditions, in terms of both detection accuracy and stability. This is conducive to our selection of detection methods with better applicability in land-based contexts, to improve detection accuracy and stability.

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.79-87
• /
• 2024

This study introduces a method for estimating Aerosol Optical Depth (AOD) using Broadband Aerosol Optical Depth (BAOD) derived from direct normal irradiance and meteorological factors observed between 2016 and 2017. Through correlation analyses between BAOD and atmospheric components such as Rayleigh scattering, water vapor, and tropospheric nitrogen dioxide, significant relationships were identified, enabling accurate AOD estimation. The methodology demonstrated high correlation coefficients and low Root Mean Square Errors (RMSE) compared to actual AOD₅₀₀ measurements, indicating that the attenuation effects of water vapor and the direct impact of tropospheric nitrogen dioxide concentration are crucial for precise aerosol optical depth estimation. The application of BAOD for estimating AOD₅₀₀ across various time scales-hourly, daily, and monthly-showed the approach's robustness in understanding aerosol distributions and their optical properties, with a high coefficient of determination (0.96) for monthly average AOD₅₀₀ estimates. This study simplifies the aerosol monitoring process and enhances the accuracy and reliability of AOD estimations, offering valuable insights into aerosol research and its implications for climate modeling and air quality assessment. The findings underscore the viability of using BAOD as a surrogate for direct AOD₅₀₀ measurements, presenting a promising avenue for more accessible and accurate aerosol monitoring practices, crucial for improving our understanding of aerosol dynamics and their environmental impacts.

• Korean Journal of Ecology and Environment
• /
• v.36 no.4 s.105
• /
• pp.391-402
• /
• 2003

Last 20 years have witnessed many studies dealing with effects of elevated $CO_2$ on terrestrial ecosystems. However, fewer efforts have been made to elucidate effects on wetland ecosystems, although they play a key role in global biogeochemical cycles. This review synthesizes published data to reveal effects of elevated $CO_2$ on wetland plants. In particular, we focused on the changes in primary production, community structures, evapotranspiration, and nutrients in plants. Many studies have reported increases in primary production in individual plants, but we could not conclude that this will lead to increases in carbon sequestration in wetland ecosystems. The reasons include transport of photosynthates into belowground parts, speciesspecific responses, interaction among different species, and limitation of other nutrients. However, elevated $CO_2$ increased transpiration rates in many wetland plants, suggesting substantial influences on water budgets of wetlands. In addition, similar to terrestrial ecosystems, elevated $CO_2$ increased C/N ratio of many plants, which may impede organic matter decomposition in the long term. However, further information on dynamics of belowground carbon supplied from wetland plants is warranted to assess effects of elevated $CO_2$ on wetland carbon cycle accurately.

• Korean Journal of Plant Resources
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2010

Present studies were conducted to investigate the effects of autoclaving on antioxidant activities of Achillea alpina and Solodago virgurea. At early April, young leaves of 2 species were collected, subjected to autoclaving ($121^{\circ}C$, 1.2 atmospheric pressure, 15 minutes), freezed-dried, grinded, and extracted with 80% ethanol. The same process was repeated with unautoclaved control. Total polyphenol and flavonoid contents, scavenging activities on DPPH and ABTS radicals and ferrous ion chelating effects were analyzed. Extraction yield of autoclaved S. virgurea was 39.55% and A. alpina 28.15%. In both species, autoclaving significantly reduced scavenging activities on DPPH and ABTS radicals. On the contrary, ferrous ion chelating effects increased after autoclaving, especially in young leaves of A. alpina. Autoclaving resulted in decrease of polyphenol and flavonoid contents, especially in the A. alpina. The present experiments demonstrated that autoclaving had negative effects on antioxidant activities of A. alpina and S. virgurea, except in ferrous ion chelating effects. Young leaves of former species were unstable to heat treatment, resulting in big lose of antioxidant activity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.616-630
• /
• 2012

This study examines the impact of consumer knowledge and familiarity with private label brands (PLBs) on perceptions and preferences toward PLBs and patronage intentions; in addition, it examines the incremental effects of a department store image over consumer knowledge and familiarity with perceptions, preferences, and patronage intentions. This study focused on midscale department store PLBs of apparel products and middle age consumers between the ages of 30 and 50 who are the main consumer group of private label brands of apparel products. A structured questionnaire was developed and data were collected from a convenience sample of 257 female consumers between the ages of 35 and 54, living in the Southeastern United States. A factor analysis identified the dimensions of department store image constructs; in addition, a hierarchical regression and multiple regression analyses examined the hypotheses. Consumer knowledge and familiarity with PLBs at department stores is recognized as a major determinant to shape consumer perceptions of and preferences for the PLBs as well as patronage intentions. The present study reveals the significant incremental effect of a store image on consumer preferences, perceptions, and patronage intentions beyond that explained by consumer knowledge and familiarity about PLBs. The study reveals that, among four store image constructs, the store atmosphere and store service factors had significant positive effects on consumer perceptions of PLBs. Store service and atmospheric aspects also affect consumer patronage intentions toward PLBs. The price factor shows a significant and positive influence on the preference consumers have for PLBs, but not on perceptions and patronage intentions. This study has practical implications for department store executives and managers on how to allocate resources in order to increase positive consumer perceptions toward PLBs, preferences over other brands, and patronage intentions of PLBs at a store as well as how to create effective store environments to promote PLBs.