• Korean Journal of Organic Agriculture
• /
• v.14 no.4
• /
• pp.411-420
• /
• 2006

Indole-3-acetic acid (IAA) biosynthesis by bacteria occurs widely in rhizospheres. Bacterial species able to synthesize IAAmay be exploited for beneficial interactions in crop management systems. The objective of this study was to determine the response of ivyleaf morningglory (Ipomoea hederacea) seedlings to IAA and to an IAA-producing rhizobacterum, Bradyrhizobium japonicum isolate GD3. IAA solution and isolate GD3 suppression of seedling growth measured as radicle length and biomass depended on IAA concentration. Seedling radicle length was significantly reduced by ca. 29% with more than $1.0{\mu}M$ of IAA solution, compared to the control, 48 h after application. The cell concentration at 50% growth reduction ($GR_{50}$) of the seedling radicle was IAA production by isolate GD3 at $10^{4.82}\;cfu$, the cell concentration for 50% growth reduction ($GR_{50}$) of seedling radicle was 0.24 iM, which was much lower than the IAA solution concentration ($117.48{\mu}M$) required for $GR_{50}$. Therefore, excess IAA production by isolate GD3 may be more detrimental to morningglory radicle growth than standard IAA solution. Results confirmed involvement of IAA in suppressive effects of isolate GD3 on morning-glory seedlings grown in a hydroponic system.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.26 no.1
• /
• pp.1-14
• /
• 1998

Various numerical methods for the two dimensional shallow water equations have been applied to the problems of flood routing, tidal circulation, storm surges, and atmospheric circulation. These methods are often based on the Alternating Direction Implicity(ADI) method. However, the ADI method results in inaccuracies for large time steps when dealing with a complex geometry or bathymetry. Since this method reduces the performance considerably, a fully implicit method developed by Wilders et al. (1998) is used to improve the accuracy for a large time step. Finite Difference Methods are defined on a rectangular grid. Two drawbacks of this type of grid are that grid refinement is not possibile locally and that the physical boundary is sometimes poorly represented by the numerical model boundary. Because of the second deficiency several purely numerical boundary effects can be involved. A boundary fitted curvilinear coordinate transformation is used to reduce these difficulties. It the curvilinear coordinate transformation is used to reduce these difficulties. If the coordinate transformation is orthogonal then the transformed shallow water equations are similar to the original equations. Therefore, an orthogonal coorinate transformation is used for defining coordinate system. A multigrid (MG) method is widely used to accelerate the convergence in the numerical methods. In this study, a technique using a MG method is proposed to reduce the computing time and to improve the accuracy for the orthogonal to reduce the computing time and to improve the accuracy for the orthogonal grid generation and the solutions of the shallow water equations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.893-900
• /
• 2003

Numerical simulations of freely propagating flames burning stoichiometric C $H_4$/CHC1$_3$/ $O_2$/$N_2$ mixtures are performed at atmospheric pressure in order to understand the effect of the $O_2$ enrichment level and the CHC1$_3$/C $H_4$ molar ratio. A chemical kinetic mechanism is developed, which involves 69 gas-phase species and 379 forward and 364 backward reactions. The calculated flame speeds are compared with the experiments for the flames established at several CHC1$_3$/C $H_4$ molar ratio (R<1), the results of which is in excellent agreement. As a results of the increased $O_2$ enrichment level from 0.21 to 1, the flame speed and the temperature in the burned gas are increased. At high CHC1$_3$/C $H_4$ molar ratio two peak values appear on the $O_2$ consumption rate, which are affected by CC1$_2$＋ $O_2$$_{-}$>C1O+CC1O and H＋ $O_2$$_{-}$>O＋OH.＋OH.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.204-210
• /
• 2010

The inner structure of the triangular separate bar (TSB) was improved to enhance the productivity of the TSB flow meter by simplifying the machining process for making the flow meter. The cross section of upstream and downstream pressure chamber in the TSB was changed from triangle to circle, which make it possible to substitute the wire cutting by drilling in the process of machining the pressure chamber. The flow rate characteristics of the flow meters was calibrated with a laminar flow meter. Six kinds of flow meters whose diameters of pressure tap for measuring pressure of both upsteam and downstream pressure chamber were different one another were made. The effects of the pressure tap diameter on the flow rate characteristics of the TSB flow meter was little. The mass flow rate characteristics of the flow meters with increasing a non-dimensional parameter which includes the gas temperature, exhaust gas pressure and differential pressure at the flow meters and atmospheric pressure shows nearly linear relationship with a correlation coefficient of R=0.998.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.775-782
• /
• 2012

To investigate pool boiling heat transfer in a vertical annulus with closed bottoms, the length of an outer tube was varied between 0.3 and 0.6 m. For the test, a heated tube of 0.2-m length and 19.1-mm diameter and water at atmospheric pressure were used. To elucidate the effects of the outer tube length on heat transfer, the results for the annulus were compared with data for a single unrestricted tube. The increase in the outer tube length resulted in an increase or decrease in heat transfer depending on the gap size. This tendency is mainly attributed to the difference in the intensity of liquid agitation.

• Journal of Surface Science and Engineering
• /
• v.45 no.1
• /
• pp.1-7
• /
• 2012

Multi-walled carbon nanotube (MWCNT) aluminum composite powders were deposited to form coatings using a high velocity oxygen fuel (HVOF) spraying process. High thermal energy and contact with atmospheric oxygen were supplied as the MWCNT aluminum composite particles were exposed to a gas flow field at high temperature (${\sim}3.0{\times}10^3$ K) during HVOF spraying. As a result, the particles underwent full or partial melting and rapid solidification due to the high thermal energy, and the exposure to oxygen induced the interfacial reaction of MWCNTs within the particle. The electrical and mechanical properties of MWCNT aluminum composite coatings were evaluated based on microstructure analysis. Electrical resistivity, elastic modulus, and micro-hardness, of the MWCNT aluminum composite coatings were higher than those of pure aluminum coating. The contribution of MWCNTs to the aluminum matrix can be attributed to their high electrical conductivity, dispersion hardening and anchoring effects. The relationship among the properties and the interaction of the MWCNTs with the aluminum matrix is discussed.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.3
• /
• pp.262-267
• /
• 2006

Increased application of glyphosate (Gly) in glyphosate-resistant (GR) soybean cropping systems may affect rhizospheric microorganisms including IAA-producing rhizobacteria (IPR) and their effect on the growth of soybean. This field experiment was conducted to assess IPR populations in the rhizosphere of GR soybean ('Roundup-Ready' DeKalb DKB38-52) treated with glyphosate and foliar amendment treatments such as $PT21^{(R)}$ (urea solution with N 21 %) and $Grozyme^{(R)}$ (Biostimulant: mixtures of micro nutrients and enzymes). Effects of herbicide, sampling date, and their interaction on total bacterial numbers were significant (P < 0.001, 0.001, 0.013, respectively). Total bacteria (TB) numbers were increased with glyphosate treatment at 20 d after application and highest TB populations were associated with $Grozyme^{(R)}$ application, possibly due to the additional substrate from this product. The IPR of the soybean rhizosphere was significantly affected by herbicide, sampling date, and the herbicide*foliar amendment interaction. The ratios of numbers of IPR to TB ranged from 0.79 to 0.99 across the sampling dates irrespective of treatments. IPR numbers were slightly hindered by glyphosate application regardless of foliar amendment.

• The Journal of Korean Physical Therapy
• /
• v.23 no.4
• /
• pp.23-28
• /
• 2011

Purpose: To investigate the effects of hyperbaric oxygen therapy (HBOT) on chronic low back pain in elderly patients with impaired functioning in daily life. Methods: 35 subjects with chronic low back pain were randomly allocated into two groups, HBOT group and Placebo group. We applied TENS and mechanical massage to the lower back in both groups. Then 35% oxygen at 1.4 ATA was given to the HBOT group and atmospheric oxygen at 1 ATA to the placebo group. Results: Comparing the HBOT group with the placebo group after performing interventions six times in 2 weeks, a statistically significant difference in the Visual Analogue Scale (VAS) and Oswestry Disability Index (ODI) scores was observed between the two groups. There was a statistically significant difference in VAS and ODI scores (56% and 34.97% respectively) between the HBOT group and the placebo group. A statistically significant difference was ascertained in the degree of variables VAS and ODI in the HBOT group. Conclusion: Application of HBOT in chronic low back pain could be beneficial for reducing pain and could help in functional recovery.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.5
• /
• pp.329-337
• /
• 2016

The demand for the eco-friendly vehicles is skyrocketing because of the increasing $CO_2$ emissions and global warming. In the industrial field, the battery process, a core part of an eco-friendly vehicle, is drawing increased attention; its weight lightening as well as high energy density are becoming increasingly important. In this study, pure Ni plates that were used as the battery pole plate were welded using the laser. The lab joint welding was conducted on ten pure Ni plates at a laser power of 1900 W and a feed speed of 2.8-3.4 m/min. As observed in the experiment, a faster feed speed reduced the bead width, but the laser did not penetrate all ten specimen plates. In addition, pores were trapped when protective gas was used, but they were not trapped when the welding was conducted in atmospheric condition.

• The Microorganisms and Industry
• /
• v.26 no.1
• /
• pp.18-30
• /
• 2000

Three kinds of organic matter such as glucose, oxalic acid, and ethanol were added to the media(N-free or NO$\_$3/-riched) and their effects on the nitrogen fixation of Nostoc pruniforme were measured by manometric technique through the experiments in vivo. 1) The organic matters used in this experiments showed effective results as a role of substrate for the fixation of atmospheric nitrogen. 2) In the nitrogen-free medium treated with the both of flucose nad ethanol, the highest nitrogen uptakes were detected in the treated of low concentrations (glucose ; 0.1%, 0.5%, ethanol : 0.1%, 0.5%). On the contrary, the highest nitrogen uptakes in NO$\_$3/-riched medium were measured at the treated of high concentrations (glucose ; 2%, 1%, ethanol ; 1.5%, 1.0%). 3) The highest nitrogen uptakes in N-free medium treated with oxalic acid were measured at the concentration of 2% and 1%, respectively. In the medium of NO$\_$3/-riched, the nitrogen uptakes were in the opposite directions.