• 제목/요약/키워드: Atmospheric effects

검색결과 1,164건 처리시간 0.032초

SIMULATION OF CLOUD'S VISIBLE REFLECTION USING MODIS CLOUD PRODUCTS

  • Ham, Seung-Hee;Sohn, Byung-Ju
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.668-671
    • /
    • 2006
  • Radiative transfer modeling of ice clouds is developed. Ice clouds located near tropopause reflect most of sunlight, thus atmospheric and surface effects can be minimized. Cloud properties such as cloud optical thickness (COT) and effective radius are important parameters to determine the magnitude of reflectance, while atmospheric and surface parameters rarely affect reflectance value. For selected homogeneous cloud pixels of MODerate Resolution Imaging Spectroradiometer (MODIS) observation, reflectances are calculated using MODIS cloud products as inputs of radiative transfer model (RTM). For three types of phase function (Henyey-Greenstein, Garcia-Siewert, Baum) calculated reflectances are compared with observations for validation. All cases show linear relationship between simulated values and measured values, however each represent different bias and slope. The result shows that phase function determine angular distribution of reflectance.

  • PDF

Characteristics of Material Damage Caused by Acid Deposition in East Asia

  • Yoo, Young-Eok;Maeda, Yasuaki
    • 한국환경과학회지
    • /
    • 제11권5호
    • /
    • pp.445-454
    • /
    • 2002
  • Material exposure experiments were performed to evaluate the relationship between air pollution and material corrosion rates based on collaboration with researchers in China, Japan, and Korea. Qualitative and quantitative atmospheric corrosion was estimated from damage caused to bronze, copper, steel, marble, cedar, cypress, and lacquer plates exposed to outdoor and indoor conditions in certain East Asian cities. The effects of atmospheric and meteorological factors on the damage to the copper plates and marble pieces were estimated using a regression analysis. The results indicated that sulfur dioxide produced the most destruction of the materials, especially in South Korea and China. In Japan, the copper plates were damaged as a result of natural conditions and sea salt. Copper was also found to be damaged by the surface deposition of sulfur and chlorine. Meanwhile, marble was substantially degraded by gaseous sulfur dioxide, yet sulfate ions in rain had no effect. Accordingly, the analysis of air pollution from the perspective of material damage was determined to be very useful in evaluating and substantiating the intensity of air pollution in East Asia.

상압 수증기중에서 인산 석고로부터 $\alpha$형 반수석고의 생성에 미치는 염류의 영향 (Effect of Salts on the Formation of $\alpha$-Calcium Sulfate Hemihydrate from by-Product Gypsum of Phosphoric Acid Process under Water Vapor at Atmospheric Pressure)

  • 이구종;최상흘
    • 한국세라믹학회지
    • /
    • 제25권3호
    • /
    • pp.300-306
    • /
    • 1988
  • The catalytic effect of salts on formation of ${\alpha}$-calcium sulfate hemihydrate under water vapor at atmospheric pressure was studied and the formation of q-calcium sulfate hemilydrate from by-product gypsum of phosphoric acid process was investigated. The order of catalytic effect of salts are as follow: Ammonium chloride>Sodium succinate>Calcium chloride>Sodium tartrate>Magnesium chloride The prismatic crystals was formed when ammonium chloride, calcium chloride and magnesium chloride was added, whereas the needle crystals was formed when sodium tartrate was added. Ammonium chlorideis most successful in catalytic effects in formation of ${\alpha}$-calcium sulfate hermihydrate for the by-product gypsum of phosphoric acid process.

  • PDF

Temperature variation in steel beams subjected to thermal loads

  • Abid, Sallal R.
    • Steel and Composite Structures
    • /
    • 제34권6호
    • /
    • pp.819-835
    • /
    • 2020
  • The effects of atmospheric thermal loads on the response of structural elements that are exposed to open environments have been recognized by research works and design specifications. The main source of atmospheric heat is solar radiation, which dominates the variation of the temperature of air, earth surface and all exposed objects. The temperature distribution along the depth of steel members may differ with the geometry configuration, which means that the different-configuration steel members may suffer different thermally induced strains and stresses. In this research, an experimental steel beam was instrumented with many thermocouples in addition to other sensors. Surface temperatures, air temperature, solar radiation and wind speed measurements were recorded continuously for 21 summer days. Based on a finite element thermal analysis, which was verified using the experimental records, several parametric studies were directed to investigate the effect of the geometrical parameters of AISC standard steel sections on their thermal response. The results showed that the overall size of the beam, its depth and the thickness of its elements are of significant effect on vertical temperature distributions and temperature differences.

Reduction of NOx emission from fuel nitrogen in new staged fuelling system(1)(Characteristics of NOx formation & reduction)

  • Chun, Young-Nam;Shin, Dae-Yewn
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제10권E호
    • /
    • pp.303-310
    • /
    • 1994
  • The effects of NOx reduction by new staged fuelling system in a small scale combustor (6.6 ㎾$_{T}$) have been investigated using propane gas flames laden with ammonia as fuel-nitrogen. The variables which had the greatest influence on NOx reduction were temperature, reducing stoichiometry( related to main combustion zone stoichiometry, air fraction and returning fuel fraction ) and residence time. The best NOx reduction was observed at the reburning zone stoichiometry of 0.85. In terms of residence time of the reburning zone, NOx reduction was effective when burnout air was injected at the Point where the reburning zone has been already established.d.

  • PDF

고농도 오존일의 강우와 운량 (Precipitation and Cloud Cover on High Ozone Days)

  • 김영성;김영진;윤순창
    • 한국대기환경학회지
    • /
    • 제15권6호
    • /
    • pp.747-755
    • /
    • 1999
  • Effects of precipitation and cloud cover on high ozone days are examined by investigating the precipitation and average cloud cover before the ozone peak time within a day. High ozone days above 100 ppb in the Greater Seoul Area(GSA) for the ozone season from May to September are chosen for the analyses in terms of the surface meteorological data during 1990~1997. The result shows that the effect of precipitation on the rise of ozone concentration is definitely negative so that ozone concentration could not rise above 100ppb immediately after precipitation. But, the effect of cloud cover is associated with the variations of other meteorological parameters. The number of high ozone days with "zero" cloud cover is rather less than that with cloud cover of 1 to 4 since temperature is usually lower in "zero" cloud cover days. Furthermore, ozone concentration can rise above 100ppb even with full cloud cover when the wind is weak and the temperature is high.temperature is high.

  • PDF

가변 추력용 핀틀 분사기에서 추진제 상에 따른 상압분무 특성 (Effects of Propellant Phases on Atmospheric Spray Characteristics of a Pintle Injector for Throttleable Rocket Engines)

  • 유기정;손민;;김희동;구자예
    • 한국분무공학회지
    • /
    • 제21권1호
    • /
    • pp.13-19
    • /
    • 2016
  • Atmospheric spray characteristics were experimentally compared between liquid-gas and liquid-liquid sprays of a pintle injector. In order to study spray characteristics, water and air were used as the simulants and the visualization technic was adopted. Spray images were acquired by using a backlight method by a high-resolution CMOS camera. As a result, when the pintle opening distance increased, liquid sheets became unstabled and fluttering droplets increased. In the liquid-gas case, the breakup performance increased as the pressure of gas injected from the annular orifice increased. In the liquid-liquid case, atomization efficiency decreased as the pressure of liquid injected from the annular orifice increased. Spray angles presented a similar trend between two cases. At the same momentum ratio, the spray angle of liquid-liquid case was lower than the angle of liquid-gas case.

고도에 따른 제동 성능 예측을 위한 엔진 흡기압 모델링 (Modeling of Engine Intake Pressure for Predicting Braking Performance Affected by Altitude)

  • 안광만;이지석;박진일;이종화
    • 한국자동차공학회논문집
    • /
    • 제22권3호
    • /
    • pp.228-233
    • /
    • 2014
  • Reduction of the atmospheric pressure in high altitude affects brake booster system which was operated by the difference between the intake pressure and the atmospheric pressure. So, braking system can not stably perform due to decrease of brake boost pressure. In this study, effects of altitude change on engine intake pressure was analyzed by prediction model of engine intake pressure which was studied previously. And engine intake pressure was simulated by simulation model in various driving conditions and environmental conditions.

대기오염 방지대책으로서 지역난방의 효과분석에 관한 연구 (A Study on the Effects of the District Heating as an Air Pollution Control Strategy)

  • 전의찬;김정욱
    • 한국대기환경학회지
    • /
    • 제6권1호
    • /
    • pp.51-56
    • /
    • 1990
  • This Study shows the effect of the district heating on the $SO_2$ concentration reduction. In order to analyze the effect of the district heating, three alternatives were set up as follows; Alternative I represented present central heating system, and Alternative II and Alternative III represented district heating system of which the scale were different from. The concludions of this study are as follows; In case of the Alternative II and III, annual average $SO_2$ concentration are reduced by 9.0% and 14.6% respectively, and winter season $SO_2$ concentrations are reduced by 12.2% and 15.8% respectively, at the highest points. The average reduction rates of $SO_2$ concentration in the district heating area are about the same as the reduction rates at the highest points. Also, it was found that using the district heating system, the ground level $SO_2$ concentrations could be reduced within the area of 5 to 10 km radius.

  • PDF

울산공단 지역에서의 대기오염이 삼림에 미치는 영향 (I) -대기오염에 의한 곰솔피해- (The Effect on the Forest by the Air Pollution around Ulsan Industrial Complex(I) -Injury on Black Pine-)

  • 이경재;배정오;고강석;우종서
    • 한국대기환경학회지
    • /
    • 제6권1호
    • /
    • pp.103-110
    • /
    • 1990
  • To investigate the damage on the black pine(Pinus thunbergii) by the air pollution around Ulsan Industrial Complex, forty-six plots were set up and the effects of air pollution were evaluated with the injured index of black pine. The injured index of black pine showing the degree of air pollution from 1987 to 1988 indicated that the central area of Yeochun-dong and Youngjam-dong were heavily damaged. The effective indicaters of black pine damage from air pollution in the order of importance were the color change of one-year-old branch, the ratio of fallen needle of two-year-old branch, the degree of reducing needle, and the degree of growing shoot growth. There was a reliable relationship between the content of $SO_3$ and F in the air and the injured index of black pine. There was no significant correlation between the injured index of the black pine and the content of chemical properties in soil.

  • PDF