• The Journal of Korean Physical Therapy
• /
• v.10 no.1
• /
• pp.1-6
• /
• 1998

The purpose of this study was to determine the of effective concentration of procaine iontophoresis for durarion of cutaneous local anesthesia. Forty-five healthy students with an age range of 19 to 34 years$(21\pm2.7)$, were participated in this study. The subjects were randomly assigned into 5 groups. Bach 9 subjects received iontophoresis on the flexor surface of dominant forearm with soft cotton pad $(3.5\times3.5cm)$ soaked in 2ml of $2\%$ (pH 5.28), $4\%$ (pH 5.12), $8\%$ (pH 4,98), $16\%$ (pH 4.72), $32\%$ (pH 4.52) procaine hydrochloride solution at 4mA for 10 minutes (total current 40mA min) using anodal direct current. The study was performed in a randomized, double-blind design, After procaine iontophoresis, the duration of anesthesia were evaluated at five minute intervals on five random locations in the iontophoretically area using a 21-gauge sterile hypodermic needle pressed with 1mm invagination unitl sharp pin-pricking pain sensation returned. The data were analyzed with one-way ANOVA to determine significant differences between groups. Duncan post hoc was performed at level .01. The relationship between anesthetic duration and procaine concentration was assessed with Pearson Product-Moment Correlation Coefficients. ANOVA tests showed significant differences in the anesthetic duration between the concentration of procaine solution (p<.001). Procaine iontophoresis with $4\%$ concentration produced cutaneous Socal anesthesia of significantly longer duration(15.56 min) than iontophoresis with $2\%,\;8\%,\;16\%$, and $32\%$ of procaine GCl(p<.01). Whereas the anesthetic duration had no correlation with concentration of procaine solution (r=-0.41, NS). These results support the $4\%$ procaine solution was an effective concentration of iontophoresis for induced cutaneous local anesthesia.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1485-1489
• /
• 2005

The dropwort was fermented by steeping with brown sugar, fructose syrup or oligosaccharide at room temperature for 2 month, and then stored at cold room for 6 months. The dropwort extracts prepared with three different sugars showed more than $50^{\circ}$Brix, below pH 4.0 and about $0.7\%$ titratable acidity. The dropwort extract with brown sugar showed $1.6{\times}10^6$ viable cell counts and $21.2\%$ reducing sugar. Formation of $CO_2$ gas was superior to the dropwort fermented with brown sugar or oligosaccharide. The dropwort extract with fructose syrup indicated $9.0{\times}10^3$ viable cell counts and $50.1\%$ reducing sugar. Microorganism present in fermented dropwort extract was effectively pasteurized by the addition of $3\%$ citric acid and heat-treatment at $85^{\circ}C$ for 15 min, resulting in the less production of $CO_2$ gas. The dropwort extracts prepared with brownsugar, fructose syrup or oligosaccharide was suitable for the standardization that required for plant extract in Korea Food Codex.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.539-547
• /
• 2012

Volume survey for earthwork is conducted periodically at every month at large scaled construction sites for request payment for the construction. Currently, the earthwork volume is calculated on the overlapped drawing for two cross sections which were created by new and previous surveying data observed by GPS and TS. However the survey is required lots of time and expenses as it is a pin-point surveying method thus surveyors intend to get data only for the heavy undulated topographic features chosen by himself to save time and expenses. Consequently, it causes poor results due to low dense measurement as well as it's not matched with the results by another surveyors. As a result, the conflicts related in earthwork volume calculation often arises among the owner, contractors and sub contractors. In this study, we developed a method to get surveying data for fast and accurate volume calculation using 3D Mobile Laser System and conducted an application test. Also we carried out experiments for topographic survey using MLS to judge for the application additionally. The results showed that we could reduce a time for cross section survey from 48 hours to 2 hours and collected high dense data which have 0.2m interval instead of 3m interval compare with existing method. Also we could make a map which has high accuracy within 10cm in horizontal through topographic survey using MLS.

• Composites Research
• /
• v.22 no.5
• /
• pp.15-23
• /
• 2009

The lubricant tribological characteristics of $Al_2O_3$ fiber and SiC particle hybrid metal matrix composites (MMCs) fabricated by squeeze casting method was investigated using a pin-on-disk wear tester. The wear tests of the MMCs were performed according to fiber/particle hybrid ratio in the planar-random (PR) and normal (N) orientations sliding against a counter steel disk at a fixed speed and $25\;kg_f$ loading under different sliding distances and temperatures. The test results showed that the wear behavior of MMCs varied with fiber orientation and hybrid ratio. At room temperature, the lubricant wear behavior of F20P0 unhybrid PR-MMCs was superior to that of N-MMCs while the hybrid composites exhibited the reverse lubricant wear behavior. It was also revealed that the wear resistance of PR-MMCs was superior to that of the N-MMCs due to the joint action of reinforcements and lubricant film between the friction surfaces at an elevated temperature of $100^{\circ}C$ for both fiber only and hybrid cases. In case of $150^{\circ}C$, although the trend of weight loss was similar to that of others, the wear resistance of PR-MMCs was better than that of N-MMCs for hybrid MMCs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.370-377
• /
• 1989

Jerusalem artichoke (Helianthus tuberosus L.) as a biomass potential crop has several distinct advantages such as vigorous growth on poor land and high yield of carbohydrate. In this crop, seed dormancy has hampered the efforts of seed-propagration and to use them in breeding programs for improving jerusalem artichoke. Several seed treatments were tested to determine their effectiveness in overcoming the seed dormancy found in five collected varietes of jerusalem artichoke. The first results showed that the seed fertilities of five collected varieties ranged from 2.4％ to 14.7％ and the number of seed produced by one plant ranged from 88 to 1058. Germinability of seeds stored for 3 months at room temperature after harvest was almost 0％ and it was not improved by addition to the treatments of temperature, light and GA3, while germinability of seeds stored for 27 months at room temperature after harvest increased to 47.5％ in germination rate. But the removal and pin-pricking of seedcoat were very effective in breaking the seed dormancy, giving germination of 96.8％ and 82.3％, respectively. These results showed that the seed dormancy of jerusalem artichoke was induced by the seedcoat. Besides the treatment of seedcoat removal and seedcoat-pinpricking, the treatment of low and wet stratification was also effective in breaking the seed dormancy of jerusalem artichoke. Whole dormant seeds incubated for 70 days in low and wet condition germinated over 85％.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.498-510
• /
• 2001

Distraction osteogenesis refers to the biological process responsible for new bone formation between bone segments by gradual distraction after osteotomy. For the past several years, various inconveniences including a protracted consolidation period that requires patients to wear a distractor frame longer, as well as higher medical costs, have not been remedied by improvements in osteotomy, distraction rate and monitoring system. Furthermore, side effects such as pin tract infections and soft tissue swelling may arise due to the long treatment period. These drawbacks form the rationale of this study which purports to seek a method by which the consolidation period can be reduced. This paper examines how platelet-rich plasma(PRP), known to facilitate osteogenesis, influences bone formation when applied in distracted area. Ten mongrel dogs, which were made to wear external distractor frames after osteotomy in both sides of the mandible, were used as subjects. After a 7day period of latency, distraction was carried out at a rate of 1mm/day for 14 consecutive days. After the onset of distraction, 2ml of PRP and a mixture of calcium gluconate and thrombine were injected into the center of the distracted callus on the left side of the mandible. The left was injected with PRP while the right side was set as the control site without PRP treatment. Execution at the onset of distraction and in 2 weeks, 4 weeks and 8 weeks after the consolidation period, clinical and radiographic tests, bone mineral density examination, histological examination and histomorphometric analysis were conducted to compare both sides. The results are summarized as follows: 1. Based on the clinical examination at two weeks, more remarkable cortical bone formation was found on the buccal and lingual side of the distracted area in the PRP treatment site than in the control site. No visual difference was found between the PRP treatment site and the control site at four eight weeks. 2. Based on the radiological examination, a distinct increase in the radiopaque appearance of the PRP treatment site was revealed at two weeks, but this increase appeared to slow down at four and eight weeks. 3. Examination of bone mineral density revealed a significant difference at two weeks with the PRP treatment site yielding density two times higher than the control site. This difference lessened after four weeks, and disappeared at eight weeks. 4. The histomorphometric examination revealed that about 20% more bony trabeculae area(20%, higher) was formed in the PRP treatment site than in the control site. In conclusion, it can be said that PRPs effect on stimulating bone formation in the PRP treatment site manifest as early as two weeks. Trabeculae formation likewise increased throughout the whole period. If this result can be applied to humans, the consolidation period can be reduced by injecting PRP into the distracted area.

• The Plant Pathology Journal
• /
• v.36 no.4
• /
• pp.335-345
• /
• 2020

Tomato grey mould has been one of the destructive fungal diseases during tomato production. Ten mM of menadione sodium bisulfite (MSB) was applied to tomato plants for eco-friendly control of the grey mould. MSB-reduced tomato grey mould in the 3rd true leaves was prolonged at least 7 days prior to the fungal inoculation of two inoculum densities (2 × 10⁴ and 2 × 10⁵ conidia/ml) of Botrytis cinerea. Protection efficacy was significantly higher in the leaves inoculated with the lower disease pressure of conidial suspension compared to the higher one. MSB-pretreatment was not effective to arrest oxalic acid-triggered necrosis on tomato leaves. Plant cell death and hydrogen peroxide accumulation were restricted in necrotic lesions of the B. cinereainoculated leaves by the MSB-pretreatment. Decreased conidia number and germ-tube elongation of B. cinerea were found at 10 h, and mycelial growth was also impeded at 24 h on the MSB-pretreated leaves. MSB-mediated disease suppressions were found in cotyledons and different positions (1st to 5th) of true leaves inoculated with the lower conidial suspension, but only 1st to 3rd true leaves showed decreases in lesion sizes by the higher inoculum density. Increasing MSB-pretreatment times more efficiently decreased the lesion size by the higher disease pressure. MSB led to inducible expressions of defence-related genes SlPR1a, SlPR1b, SlPIN2, SlACO1, SlChi3, and SlChi9 in tomato leaves prior to B. cinerea infection. These results suggest that MSB pretreatment can be a promising alternative to chemical fungicides for environment-friendly management of tomato grey mould.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.274-281
• /
• 2017

The optimization of lactic acid fermentation was conducted to produce an old antler fortified with functional ingredients. For the over-production of gamma aminobutyric acid (GABA), the extract of old antlers (OA) was fermented by Lactobacillus plantarum EJ2015 with 0.5% YE, 1.5% glucose, and 3.5% MSG at $30^{\circ}C$ for 7 days. The lactic acid fermented OA showed high viable cell counts of $2.0{\times}10^8CFU/mL$, pH 6.56 and 0.77% acidity after 7 days. Addition of Auricularia auricula-judae (AAJ) enhanced the cell growth of L. plantarum EJ2014, resulting in higher viable cell counts of $2.0{\times}10^9CFU/mL$ and acid production after fermentation for 1 day. In particular, acidity was greatly decreased after fermentation for 3 days and 1.4% GABA was produced by converting efficiently mono sodium glutamate as a substrate. Fermented OA/AAJ mixture indicated the reduced cytotoxicity compared with that of unfermented OA. The fermented OA/AAJ mixture indicated anti-inflammatory effect with less production of NO in microphage cells. The production of NO dropped to $17.75{\mu}M$ at 4 mg/mL, and to $5.58{\mu}M$ at 6 mg/mL old antler after fermentation. Thus, lactic acid fermented OA with AAJ could fortify GABA, probiotics and dietary fiber.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup2
• /
• pp.294-299
• /
• 2001

Objectives : CT-guided stereotactic evacuation for spontaneous intracerebral hemorrhage can minimize the brain damage and can be performed safely and simply under local anesthesia. But that procedure is time consuming and has a risk of rebleeding because of the stress during head pin fixation. So authors describe easy and precise guidelines for FHA of putaminal hemorrhage without stereotactic instrument. Methods and Materials : We analyzed the data of 298 patients who underwent CT-guided stereotactic aspiration of putaminal hematoma in our hospital between January 1990 and December 2000. We divided the patients into three groups according to the location of hematoma : anterior portion, middle portion and posterior portion of putamen. Total number of catheters inserted into the hematoma were 345 and there were with regard to the direction and depth of catheters. Results : Proposed guidelines of catheter insertion to putaminal hemorrhage in our institution. 1) hematoma at the anterior portion of putamen ; Direction of catheter was the midpupillary line of the eye and the point intersecting a line drawn from the burr hole to a point between external auditory meatus(EOM) and 1cm posterior to EOM. Depth of catheter was 6-6.5cm. 2) hematoma at the middle portion of putamen ; Direction of catheter was the midpupillary line of the the eye and the point intersecting a line drawn from the burr hole to a point between 1cm and 2cm posterior to EOM. Depth of catheter was 6.5-7cm. 3) hematoma at the posterior portion of putamen ; Direction of catheter was 15 degree laterally from the midpupillary line of the eye and the point intersecting a line drawn from the burr hole to a point between 2cm and 3cm posterior to EOM. Depth of catheter was 7-7.5cm. We have performed FHA of putaminal hemorrhage in 48 cases according to this guideline. All catheter were inserted exactly at the center of hematoma and average operation time was about 30 minutes. Conclusion : Our proposed guidelines for putaminal hemorrhage are considered to be safe and simple method with similar accuracy and rapid decompression compared with traditional stereotactic method. Main advantages of this technique were unnecessity of stereotactic frame application and less time requirement for hematoma removal.

• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2019

Agrocybe cylindracea was cultured in a bag, in which sawdust culture medium (1 kg) is put in a plastic bag (PE), with poplar sawdust, rice bran, wheat bran, and dried bean curd refuse in the ratio of 70:10:10:10 (v/v). 2% of the culture medium was inoculated with the liquid starter of Agrocybe cylindracea, and this was incubated at $25^{\circ}C$. After incubation, the A. cylindracea was further cultured by cutting the top vinyl portion of the bag down to the level of the culture medium surface of the first inoculation part. The cut culture medium was placed in a growth room at $25^{\circ}C$, and pin-heading was induced under light irradiation at 99% humidity and 1,000 ppm $CO_$ level for 3days. When the grow the environment was controlled at 95% humidity and $21^{\circ}C$, the bending of the stem was less as compared to that when the cap of the bag had been removed. The number of effective fruiting bodies per bag increased by 140% (28.8), the quantity per bag increased by 29.5%, and 148.5 g A. cylindracea could be potentially harvested.