• Journal of Korean Foot and Ankle Society
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2010

Purpose: The diabetic charcot neuroarthropathy of ankle is an infrequent site (around 5%), but is definitely the location that, because of the instability and progressive deformity it involves, cause ulceration in a high percentage of patients, and this can then become a reason for amputation. However, the treatment of this disastrous disease is still challenging. We analyzed the clinical and radiological results of ankle arthrodesis by our fixation method in Charcot neuroarthropathy. Materials and Methods: Seven cases that were diagnosed as charcot neuroarthropathy of ankle arthrodesis were followed for more than 16 months postoperatively. Mean age was 57 years, and the mean follow-up period was 27 months. Anterior approach was used in arthrodesis, and internal fixation by 3 or more cannulated screws and hybrid type external fixation were used. Auto iliac bone for grafting was combined in all cases. External fixator was kept for 3 months without weight-bearing. Then, boots brace was applied for more 3 months allowing partial weight-bearing. Four cases had minor complications such as pin site infection. Preoperative and postoperative AOFAS score, time to fusion and postoperative complications were checked. Results: Postoperative fusion was completed in all cases, and the mean time to fusion was 3.4 months. No postoperative complication was checked. At the last follow-up, the mean AOFAS score had increased from 54 points to 72 points. Patient's satisfaction was over 80%. Conclusion: Satisfactory results were obtained after ankle arthrodesis using internal and hybrid type external fixation combined with auto iliac bone graft in charcot neuroarthropathy with minor complications.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.351-358
• /
• 2007

Unlike external bonded steel plate or carbon fiber, the external unbonded strengthening using hi-strength bar has some advantages in speed and simplicity of installation. It is not required surface preparations and not affected by environmental conditions. A set of nine laboratory tests on RC beams strengthened using the hi-tension bars are reported. Anchoring pin developed in former research is installed at the end of beam to connect the hish-tension bar to RC beam. The test results strengthened by hi-tension bars are compared with those of non-strengthened specimens. The main test parameters are the cross-sectional area of the high-tension bar, distance of stirrups and condition of supports. Test results show that the beams reinforced are superior to reference specimens, especially for the strength and deformation capacity. Also, shear resisting effect of hi-strength bar can be confirmed in the specimens which have lack of stirrups.

• Preventive Nutrition and Food Science
• /
• v.9 no.2
• /
• pp.138-143
• /
• 2004

Soybean curd residues (SCR) obtained from hot and cold manufacturing processes were fermented by indigenous microorganisms, Lactobacillus rhamnosus LS and Bacillus firmus NA-l for 15 h at 37$^{\circ}C$. The pH, acidity, viable cell counts, and tyrosine content were evaluated in samples with variations in sugar, starter and type of SCR. The raw Doowon SCR (D-SCR, cold-processed) fermented by indigenous microorganism had a 0.9% acidity and 6.7 ${\times}$ 10$^{7}$ CFU/g viable cell counts, compared with the 0.11 % acidity and 6.7 ${\times}$ 10$^{6}$ CFU/g viable cell counts of raw fermented Pulmuwon SCR (P-SCR, hot-processed). After fermentation of raw P-SCR with 1 % glucose and 1 % L. rhamnosus LS starter, the viable cell counts, tyrosine content and acidity were 4.7 ${\times}$ 10$^{8}$ CFU/g, 16.3 mg% and 0.9%, respectively. In addition, the raw P-SCR fermented with Bacillus firmus NA-l as co-starter had a 0.45% acidity, 2.4 ${\times}$ 10$^{8}$ CFU/g lactic acid bacteria, and 3.3 ${\times}$ 10$^{6}$ CFU/g Bacillus sp. In particular, the tyrosine content was increased 5 fold. The drying of fermented SCR was completed by hot-air drying (5$0^{\circ}C$) within 12 h; the dried P-SCR and D-SCR had 1.8 ${\times}$ 10$^{7}$ CFU/g and 5.3 ${\times}$ 10$^{6}$ CFU/g viable cell counts, respectively. The concentrate of methanol extract from fermented D-SCR inhibited the initial cell growth of E. coli, Staphylococcus aureus and Pseudomonas aeruginosa in liquid culture.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.237-242
• /
• 2015

A new brown button mushroom cultivar, 'Hogam', C34 line, was made by crossing homokaryons, ASI1164-37 and ASI1175-66, selected by RAPD analysis and by cultivating three times. Mycelium of 'Hogam' on CDA (compost dextrose agar) media grew well at $25^{\circ}C$. The optimum pin-heading temperature of new variety and optimum growing temperature was $14-18^{\circ}C$. The thickness of the mature cap and stipe were thicker than a control, 'Dahyang' that developed in 2010. The color of pileus was light brown and lighter than 'Dahyang'. Days required from casing to first harvesting were three days longer than control strain, but the weight of harvested fruiting body increased by 1.35 times. 'Hogam' cultivar are expected to contribute to the diversification of domestic mushroom cultivars.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.37-43
• /
• 2018

Optimization of the lactic acid fermentation process was carried out to produce an old antler extract fortified with ${\gamma}$-aminobutyric acid (GABA). An old antler extract (OAE; 5%, w/v) obtained using a herbal extractor showed the highest contents of solids (1.75%) and proteins ($980{\mu}g/mL$). It also showed the highest total amino acid contents of $13,659{\mu}g/mL$, with glycine, proline, and glutamine concentrations of 1,945, 3,405, and $1,641{\mu}g/mL$, respectively. For the over-production of GABA, OAE was fermented with Lactobacillus plantarum EJ2014 in the presence of 0.5%, 1.5% glucose, and 3.5% MSG at $30^{\circ}C$ for 7 days. The fermented OAE showed high viable cell count of $2.0{\times}10^8CFU/mL$, pH of 6.56 and 0.77% acidity after 7 days. In particular, the acidity was greatly decreased by fermentation for 3 days, and 1.4% GABA was produced by the efficient conversion of the substrate, mono sodium glutamate.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.443-448
• /
• 2008

In this study, black garlic was produced by aging under high temperature $(70^{\circ}C)$ and high humidity (90% RH) conditions. Then, the physiological activity and antioxidative effects of its extract were compared to those of normal garlic extract. The black garlic extract had a 2.5-fold higher total polyphenol content than that of the normal garlic extract, showing levels of 10.0 mg/g and 3.7 mg/g, respectively. At the $1,000{\mu}g/mL$ concentration, the black garlic and normal garlic extracts had electron donating abilities of 101.9% and 12.9%, respectively. For their nitritescavenging effects, the normal garlic extract showed slightly higher scavenging activity than the black garlic extract at the 5 mg/mL concentration; whereas the black garlic extract had a slightly higher effect at concentrations above 20 mg/mL. In terms of their superoxide dismutase activities, the black garlic extract showed a 10-fold higher activity as compared to the normal garlic extract at the 20 mg/mL concentration. Furthermore, at 50 mg/mL, the angiotensin converting enzyme inhibitory effects of the normal garlic and black garlic extracts were approximately 52.7% and 88.8%, respectively. These results indicate that the antioxidant activity and ACE inhibitory effects of the black garlic extract were greater than those of the normal garlic extract.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.269-269
• /
• 2012

A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.4
• /
• pp.533-540
• /
• 1995

Attenuation correction is important in producing quantitative positron emission tomography (PET) images. Conventionally, photon attenuation effects are corrected using transmission measurements performed before tracer administration. The pre-injection transmission measurement approach may require a time delay between transmission and emission scans for the tracer studies requiring a long uptake period, about 45 minutes for F-18 deoxyglucose study. The time delay will limit patient throughput and increase the likelihood of patient motion. A technique lot performing simultaneous transmission and emission scans (T+E method) after the tracer injection has been validated. The T+E method substracts the emission counts contaminating the transmission measurements to produce accurate attenuation correction coefficients. This method has been evaluated in experiments using a cylindrical phantom filled with background water (5750 cc) containing $0.4{\mu}Ci/cc$ of F-18 fluoride ion and one insert cylinder (276 cc) containing $4.3{\mu}Ci/cc$. GE $Advance^{TM}$ PET scanner and Ge-68 rotating pin sources for transmission scanning were used for this investigation. Post-injection transmission scan and emission scan were peformed alternatively over time. The error in emission images corrected using post-infection transmission scan to emission images corrected transmission scan was 2.6% at the concentration of $1.0{\mu}Ci/cc$. No obvious differences in image quality and noise were apparent between the two images. The attenuation correction can be accomplished with post-injection transmission measurement using rotating pin sources and this method can significantly shorten the time between transmission and omission scans and thereby reduce the likelihood of patient motion and increase scanning throughput in PET.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1227-1231
• /
• 2004

Pig oocytes contain high levels of lipids in the ooplasm, which reduces the visibility of the germinal vesicle (GV) under microscopic examination. Therefore, the purposes of this study were to investigate the effects of relative centrifugation force (RCF) on the visibility and maturation rates of the GV stage oocytes after centrifugation. In Experiment 1, cumulus-oocyte-complexes (COCs) were collected from slaughterhouse ovaries and randomly allocated to different RCFs (3,000 rpm: 970 g; 6,000 rpm: 3,900 g; or 10,000 rpm: 10,840 g) for 10 or 20 min. Percentages of visible GV were 76-79% in the oocytes centrifuged with 10,000 rpm, which were significantly higher (p<0.01) than those with 3,000 and 6,000 rpm. No significant differences in GV visibility were observed among oocytes with different lengths of centrifugation (p<0.05) regardless of the RCFs. In esperiment 2, the maturation rate of the oocyte was found significantly lower in the 20 min than in the 10 min group received 10,840 g of RCF (30 vs. 75%, p<0.05). In conclusion, the GV of porcine oocytes can be clearly visible by centrifugation at 10,840 g for 10 min without compromising their subsequent maturation rates and a longer centrifugation time (20 min) had no beneficial influence on the visibility of GV stage pig oocytes.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.1
• /
• pp.3-15
• /
• 2004

Geogrid reinforced soil structures with segmental block facing have been increased since 1990's, because of the convenience of installation and the flexible appearance. In this paper, the behavior of the segmental reinforced retaining wall was analysed with the results of field monitoring. The height and length of reinforced wall are 12m and 25m, respectively. The field measurement equipments are horizontal and vertical earth pressure cells, settlement plate, strain gauge, inclinometer, and displacement pin. Based on the field monitoring, the horizontal earth pressure was approximately 0.3times higher than that of the theoretical method and the maximum tensile strength of reinforcement was 26.2kN/m. The displacement of facing wall was 23mm at the point of 7.1m height of the wall and toward the wall facing. The results of the study indicate that the segmental reinforced retaining wall is in a stable condition because of good compaction & reinforcement effects, and long period of construction time. Finally, the computer program of SRWall is very useful tool to design the segmental reinforced retaining wall.