• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.307-312
• /
• 2000

Asynchronous transfer mode(ATM) is flexible to support the various multimedia communication services such as data, voice, and image by applying asynchronous time-sharing and statistical multiplexing techniques to the existing data communication. ATM service is categorized to CBR, VBR, UBR, and ABR according to characteristics of the traffic and a required service qualities. Among them, ABR service guarantees a minimal bandwidth and can transmit cells at a maximum transmission rate within the available bandwidth. To minimize the cell losses in transmission and switching, a feedback information in ATM network is used to control the traffic. In this paper, predictive control algorithms are proposed for the feedback information. When the feedback information takes a long propagation delay to the backward nodes, ATM switch can experience a congestion situation from the queue length increases, and a high queue length fluctuations in time. The control algorithms proposed in this paper provides predictive control model using slop changes of the queue length function and previous data of the queue lengths. Simulation shows the effectiveness result of the proposed control algorithms.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.41-50
• /
• 2012

In the monitoring system based on web service application, it is faced with the problems like code reproduction, difficult scalability and error recovery derived from the frequent change of data structure. So we propose a technique of monitoring system by DTD(Document Type Definition) automatic generation. This technique is to use dynamic server-side script to cope with the change of sensor data structure, generate the DTD dynamically. An it also adapt the AJAX(Asynchronous JavaScript and XML) for XML data parsing, it can support mass data transmission and exception processing for data loss and damage. This technique shows the result of recovery time is decreased about 44.8ms in case of temporary data failure by comparing to the conventional XML method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.267-273
• /
• 2012

The short-range communication module was developed in this paper which is suitable for the point-to-multipoint circumstances of 40 terminals communicating frequently in about 50 meters. The media access control layer of this communication module using asynchronous time-division multiplexing provides a fast and robust performance even in the worst case of simultaneous transmission events, and low packet error rate was measured a in LOS (Line-of-sight) circumstance by adding the function of acknowledge response to media access control layer. The difference test was carried out in order to measure the performance of point-to-multipoint communication. Two communication modules are respectively measured and graphed in 10 branches to 40 branches. The communication module developed in this paper showed a faster performance than the commercial Zigbee module in the specific case presented in this paper. Especially, in over 20 branches showed wide differences of the transmission speed. This results is caused by more network overhead of Zigbee whose wider applications needs the network layer and applicaiton layer besides media access control layer. Also, the asynchronous time-division multiplexing proposed in this paper are more suitable than CSMA-CA of Zigbee module when a lot of module ought to be frequently communicated in small area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1641-1647
• /
• 1994

This paper describes an optimal communication protocol for high-speed networks. This scheme can support multimedia services and provide fast data transmission using the distributed gueue scheme and the dynamic bandwidth allocation architecture, based on ATM(Asynchronous Transfer Mode). Performance analyses and simulation results are presented to illustrate the effectiveness of the proposed scheme in a variety of communication environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2B
• /
• pp.148-158
• /
• 2011

Stationary nodes and mobile nodes co-exist wireless sensor network(WSN) can provide variety of new services. The stationary sensor node acts not only the gathering the environmental sensing data but also a access point to bidirectional communication with numerous mobile sensor nodes(mobile node), and the mobile sensor nodes are installed inside mobile objects and identify the location in real-time and monitor the internal status of the object. However, only using the legacy WSN protocol, it is impossible to set up the stable network due to the several reasons caused by the free-mobility of the mobile nodes. In this paper, we suggest three methods to increase the hit-ratio of the asynchronous message delivery(AMD) among mobile nodes. We verified the performance of the suggested methods under the stationary-mobile co-existed WSN testbed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.209-219
• /
• 2011

Most of the computer-based distance learning systems are asynchronous ones that allow students to download from the server the lecture previously given by a lecturer. While these asynchronous systems has the advantage that enable students to view the lecture with no time restriction, the study may not be effective due to the lack of support for real-time interaction between students and lecturers. Based on the student-lecturer-collaboration session model, this paper presents a collaboration session-centric synchronous distance learning system that supports real-time interaction between students and teachers, awareness information during lecture, and feedback from students. Basic feature of the proposed system include audio and video conferencing, text-based chat, and shared slide with annotation support.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2891-2898
• /
• 2014

It is feasible to develop a fault tolerant system through module level redundancy on the Integrated Modular Avionics (IMA). However, its great implementation complexity is one of important challenges when asynchronous hardware environment is naturally assumed. To solve this problem, Physically Asynchronous Logically Synchronous (PALS) on IMA has been proposed. But, it has adaptation problem by not addressing specific architecture for IMA system. In the paper, we propose how to synchronize the input data on the IMA system under primary/secondary redundancy architecture by referring to existing PALS. In the proposed scheme, we introduce window frame by considering rate monotonic scheduling and analyze the adequate the synchronization time. Finally, we verify the feasibility of the proposed design pattern through the systematic experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1498-1508
• /
• 2003

It is important to integrate an enterprise application for automating of the business process, which is responded by a flow of market environment. There are two categories of method that integrate enterprise applications. One is Synchronous Integration, and the other is Asynchronous Integration. EAI(Enterprise Application Integration) and Web service which of the asynchronous integration is focused in the automating method of the business process. After we construct the application integration for automating of the business process, we have to concern about managing of the business transaction. Many Organizations have proposed the process method of business transaction based on 2-phase commit protocol. But this method can't supply the phase that classify the transaction by transaction weight. In this Paper, we Propose an efficient method of transaction process for business transactions, which is composed by ‘Classify Phase’ that classify transactions. We called this model “3-Phase Commit Method Applied by Classify Phase”, we design this model to manage an resource of enterprise efficiently. The proposed method is compared by the method based on 2-Phase commit that could be a problem of management the resource of enterprise, and the advantage of this method is certified to propose the solution of that problem.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1371-1378
• /
• 2009

We propose a low-power eFuse one-time programmable (OTP) memory cell based on a logic process. The eFuse OTP memory cell uses separate transistors optimized at program and read mode, and reduces an operation current at read mode by reducing parasitic capacitances existing at both WL and BL. Asynchronous interface, separate I/O, BL SA circuit of digital sensing method are used for a low-power and small-area eFuse OTP memory IP. It is shown by a computer simulation that operation currents at a logic power supply voltage of VDD and at I/O interface power supply voltage of VIO are 349.5${\mu}$A and 3.3${\mu}$A, respectively. The layout size of the designed eFuse OTP memory IP with Dongbu HiTek's 0.18${\mu}$m generic process is 300 ${\times}$557${\mu}m^2$.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1996.11a
• /
• pp.297-304
• /
• 1996

본 논문에서는 비동기 프로토콜 상으로 데이터를 암호화하여 전송할 때 발생하는 모의 제어문자에 대해 제어접두문자를 추가하지 않고 일정한 변환만 하여 송신하므로써 데이터의 길어짐을 방지하고 전체 통신 속도를 높이는 문자 변환 방법을 제시하였다. 이러한 변환을 위해 전송 데이터의 유효 범위를 가정하고 이 범위를 벗어나지 않도록 하였으며 실험을 통하여 이 방법이 기존의 방법에 비해 통신속도가 향상됨을 보이고 암호화된 데이터의 임의성을 확인하므로써 암호화에 문제가 없음을 보였다.