• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.35-44
• /
• 2008

A self-centering energy-dissipative(SCED) bracing system has recently been developed as a new seismic force resistant bracing system. The advantage of the SCED brace system is that, unlike other comparable advanced bracing systems that dissipate energy such as the buckling restrained brace(BRB) system, it has a self-centering capability that reduces or eliminates residual building deformations after major seismic events. In order to investigate the effects of torsion on the SCED brace and BRB systems, nonlinear time history analyses were used to compare the responses of 3D model structures with three different amounts of frame eccentricity. The results of the analysis showed that the interstory drifts of SCED braced frames are more uniform than those of BRB frames, without regard to irregularity. The residual drift and residual rotation responses tended to decrease as irregularity increased. For medium-rise structures, the drift concentration factors(DCFs) for SCED systems were lower than those for BRB frames. This means that SCED-braced frames deform in a more uniform manner with respect to building height. The effect of the torsional irregularity on the magnitude of the DCFs was small.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.225-230
• /
• 2017

In this paper, a highly efficient GMR(guided-mode resonant) color filter is proposed and implemented. The GMR color filter consists of $Si_3N_4/air$ layers containing complementary fixed and mobile gratings. The device is designed using RETT(rigorous equivalent transmission-line theory) and a grating structure operating in subwavelength. The numerical result reveals that the color filter has a tuning capability of about 35 nm over the $0.45{\mu}m{\sim}0.55{\mu}m$ range for blue-green color and across $0.6{\mu}m{\sim}0.7{\mu}m$ range for red color. Furthermore, The color filters have a spectral bandwidth of about 8 nm with efficiencies of 99%, 98%, and 99% at the center wavelength of blue, green, and red color, respectively, and these are higher efficiencies than reported in the literature previously.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.283-290
• /
• 2006

Cable-stayed bridge is a bridge that consists of one or more pylons, with cables supporting the deck. Cable-stayed bridges have come into wide use recently because of their economy, stability, and excellent appearance. It is possible to achieve a uniform moment distribution in the stiffening girders mainly by prestressing the cables, which leads to a more economical design in material and weight than other types of bridges. However, to achieve a more uniform moment distribution is vague objective, so it cannot be easily defined as the optimization problem. In other words, the minimization of cost or weight as the objective is not directly related to the optimization of cable prestressing. Therefore, it has been considered as one of the most important, difficult and also interesting topics among many researchers and bridge engineers to determine the optimal tensioning strategy how to apply prestressing forces of the cables of cable-stayed bridge. A number of approaches (Wang et al. 1993, $Negr\~{a}o\;and\;Sim\~{o}es$ 1997, Agrawal 1997, Janjic et al. 2003) to determine the optimal cable tensions have been proposed in the literature. Among these approaches the unit load method (Janjic et al. 2003) is considered in this paper because it can take into account the actual construction process while other approaches are based on the configuration of the final structure only. In this paper, '2-step approach' based on the unit load method is proposed to find the optimal tensioning strategy especially for the atypical asymmetric bridge under construction, which has continuous deck supported by one pylon and stay cables. Some numerical results will be given to show the validity of the new approach suggested in this paper.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.639-660
• /
• 1996

The lowest formation of the Cretaceous Gyeongsang Supergroup, the Nakdong Formation, unconformably overlies the gneiss complex basement in Hadong, Gyeongsangnam-do and Gwangyang, Chullanam-do. The Nakdong Formation of the study area is 500-600 m thick and occurs as a belt shape. Based upon lithology, sedimentary structure, and bedding geometry the formation consists of three conglomerate facies (Gd, Gn, Gic), five sandstone facies (Sh-n, Sh-i, Sp, Sr, Sm), and four mudstone facies (Mf, Mfn, Mc, Mv). Sandstone facies are the most prominent in the study area. The twelve facies can be grouped into five facies associations. The depositional settings are elucidated from analyses of 12 facies and five facies associations of the formation. The lower part of the Nakdong Formation was deposited in alluvial plain, and the middle and upper parts were in a riverine system. The lithologies of the Nakdong Formation of the Gyeongsang Basin have been considered to consist of generally conglomerates and pebbly sandstones that were accumulated in alluvial fans. But the common lithology of the study area is sandstone which was formed in lower part of alluvial fan or fluvial setting. It is supposed that the coarser sedimentary sequence distributed west to the study area should be eroded out after deposition and early uplift, and the finer sandstone sequence in the east remains behind. The mineral composition of sandstones and the clast composition of conglomerates indicate that the Nakdong Formation was derived mainly from the metamorphic source rocks. Some reworked intraclasts were also supplied from the intrabasinal sedimentary layers. Paleocurrent data collected from cross-beddings, ripple marks, asymmetric sand dune suggest that most sediments were transported from north to south during the Nakdong Formation time.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.633-639
• /
• 2008

Polysulfone membranes were prepared via the phase inversion process. Toluene was added as a nonsolvent additive in the casting solution containing a mixture of polysulfone and n-methylpyrrolidone. When prepared via the diffusion-induced process using isopropanol as a precipitation nonsolvent, the solidified membranes revealed a similar asymmetric structure irrespective of the addition of toluene, presenting both a dense skin layer and a sponge-like support layer. The added toluene played a role of enhancing liquid-liquid phase separation of the casting solution, and skin layer thickness of a prepared membrane increased with toluene content in the casting solution. On membrane performance, the solute rejection showed a uniform behavior irrespective of the addition of toluene. However, in spite of the significant increase in dense skin layer thickness, the water permeation through the membrane prepared with 60 wt% toluene revealed five times as much flux, compared with that of the membrane prepared without toluene additive.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.101-109
• /
• 2004

This paper presents a novel z-axis accelerometer with perfectly aligned vertical combs fabricated using the extended sacrificial bulk micromachining (extended SBM) process. The z-axis accelerometer is fabricated using only one (111) SOI wafer and two photo masks without wafer bonding or CMP processes as used by other research efforts that involve vertical combs. In our process, there is no misalignment in lateral gap between the upper and lower comb electrodes, because all critical dimensions including lateral gaps are defined using only one mask. The fabricated accelerometer has the structure thickness of $30{\mu}m$, the vertical offset of $12{\mu}m$, and lateral gap between electrodes of $4{\mu}m$. Torsional springs and asymmetric proof mass produce a vertical displacement when an external z-axis acceleration is applied, and capacitance change due to the vertical displacement of the comb is detected by charge-to-voltage converter. The signal-to-noise ratio of the modulated and demodulated output signal is 80 dB and 76.5 dB, respectively. The noise equivalent input acceleration resolution of the modulated and demodulated output signal is calculated to be $500{\mu}g$ and $748{\mu}g$. The scale factor and linearity of the accelerometer are measured to be 1.1 mV/g and 1.18% FSO, respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.46.3-47
• /
• 2017

We performed simultaneous VLBI observations of H2O 616-523 (22.2 GHz) and SiO v=1, 2, J=1-0 (43.1, 42.8 GHz) and v=1, J=2-1, J=3-2 (86.2, 129.3 GHz) masers toward VX Sagittarius using the Korean VLBI Network (KVN). The astrometrically registered maps of the 22.2 GHz H2O and 43.1, 42.8, 86.2 SiO masers were successfully obtained at two epochs of 2016 February 27 and 2016 March 27 by adopting the Source Frequency Phase Referencing (SFPR) method. In addition we detected 129.3 Ghz SiO maser at second epoch. These results make it possible to determine the accurate position of central star as a dynamical center of 22.2 GHz H2O maser and relative locations of 43.1, 42.8, 86.2, 129.3 GHz SiO masers. In addition, it is possible to investigate the morphological and kinematic variations of clumpy structures from SiO maser to H2O maser regions in future together with the development of asymmetric structure of H2O maser region.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.2 s.39
• /
• pp.1-7
• /
• 2006

In this paper, warpage magnitude and shape of printed-circuit board in case that properties of core and thickness of solder resist are varied are investigated. The cause of warpage is coefficient of thermal expansion differences of stacked materials. Therefore, we need small difference of coefficient of thermal expansion that laminated material, and need to decrease asymmetric of top side and bottom side in structure shape. Also, we can control occurrence of warpage heightening hardness of core in laminated material. Composite material that make core are exploited in connection with the structural bending twisting coupling resulting from directional properties of fiber reinforced composite materials and from ply stacking sequence. If we use such characteristic, we can control warpage with change of material properties. In this paper, warpage of two layer stacked chip scale package is investigated, and evaluate improvement result using an experiment and finite element method tool.

• Journal of the Korean Society of Costume
• /
• v.57 no.10
• /
• pp.129-141
• /
• 2007

In the cultural realm of Hinduism centering around India, traditional costumes such as Sari, and Dhoti are worn up to date under the influence of religious faith, tradition, and fundamentalism. The purpose of this study is to clarify the religious meaning of unstitched traditional Indian costume and inquire into the figurative beauty of it. This study revolved around India, and the aesthetic feature affected by hinduism was examined based on the literature references and the figurative feature and aesthetic value of unstitched costume were analyzed. The most important feature of Indian costume is the unstitched costume without joining pieces of cloth by using a needle and thread, symbolizing the purity based on the cosmology of Hindu. In the unstitched costume of India, natural drapery that is the large cloth, slipped or tied on body, wrapping it affluently, is emphasized. Unstitched costume of India, based on cosmology of Hindu and the concept of purity, is still broadly worn by people under the influence of fundamentalism and conservative atmosphere. Religious idea is expressed and a beauty of concealment, emphasizing the chastity, is shown in the unstitched costume of India, while a beauty of nature is distinctively revealed in the non-structural and asymmetric drapery costume due to the unique wearing style. In addition, 'A beauty of symbolism' appears in the wearing method, color, the part of wearing, and ornament. Religion has affected overall culture that is inclusive art, aesthetics, and social structure and has contributed to the formulation of costume style. Unstitched costume of India is the unique tradition of India and identity, based on the religious idea.

• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.179-187
• /
• 2002

The Ayu Trough, located in the southern end of the Philippine Sea, represents a divergent boundary between the Philippine Sea and the Caroline Plates. A detailed geophysical survey was carried out in the Ayu Trough by R/V Onnuri. Topographically, the Ayu Trough resembles an slow spreading ridge. The trough can be divided into three sections: the south $(0^{\circ}-1^{\circ}30'N),\;middle\;(1^{\circ}30'-4^{\circ}N)$, and north $(4^{\circ}-6^{\circ}30'N)$. The seafloor in the middle section is characterized by features asymmetric with respect to the axis. These features were probably produced by NW-SE and NNW-SSE extensions and seem to support the argument that the opening of the Ayu Trough occurred in an oblique fashion. Farther south, a long transform fault but with a short offset defines the boundary between middle and southern sections. The axial depth increases a stepwise to the south of $1^{\circ}30'N$. A clear difference can be seen between the southern and middle sections with the latter exhibiting much higher mantle Bouguer anomaly values in the axial region. The anomaly indicates that the axial crust perhaps experienced a much higher degree of extension in the middle than in the southern section. The analyses of magnetic field data reveal that the region beyond 100km exhibits considerable variations, whereas the magnetic anomalies within 100km from the trough axis are very much subdued. This observation suggests that the opening of the Ayu Trough involved an initial stage of rifting of existing volcanic arcs, followed by production of new seafloor.