• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.80-83
• /
• 2022

This paper proposes an initial rotor polarity detection algorithm of a single-phase permanent magnet synchronous motor (SP-PMSM) related to stable open-loop starting for sensorless operation. Generally, the SP-PMSM needs an asymmetric air-gap structure to can avoid the initial starting failure at zero torque point. Therefore, the rotor polarity information can be obtained by using the DC offset current direction of a stator current through a high frequency voltage injection into an SP-PMSM with an asymmetric air gap. In this paper, the proposed rotor initial polarity detection algorithm is verified through several experimental results.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.7-13
• /
• 2011

The fluid-structure interaction of a towed body is simulated using a developed code, which is based on the flux-difference splitting scheme on the hybrid Cartesian/immersed boundary method. To improve the stability in the coupling between the fluid and structure domains, a scheme is used, in which the effects of structure deformation are treated implicitly. The developed code is validated for the fluid-structure interaction problem through comparisons with other results on the vortex-induced vibration of elastically mounted cylinders. To simulate behavior of a towed body, an asymmetric tension modelling for a towing cable is suggested. In the suggested model, the tension is proportional to the elongation of the cable, but the cable has no effect on the body motion whenever the distance between the endpoints of the cable is smaller than the original length of the cable. The fluid-structure interactions of a towed body are simulated on the basis of different parameters of the towing cables. It is observed that the suggested tension model predicts the snapping for a shorter towing cable, which is in accordance with the reported results.

• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.424-429
• /
• 2000

본 논문에서는 준정적 해석방법을 사용하여 다층 구조에서 유한한 도체 두께를 갖는 비대칭결합 마이크로스트립(ACM: Asymmetric Couple Microstrip) 선로의 특성을 연구하였다. 준정적 해석방법으로서 모드정합법을 이용하였으며, ACM 선로의 특성 임피던스와 유효 유전율 상수가 도체 두께의 함수로 나타나는 결과를 얻었다. 수치해석 결과를 통해서 단층 및 다층구조에서 도체 두께의 변화로 인하여 ACM 선로의 전파특성이 변화되는 것으로 나타났다.

• 한국ITS학회 논문지
• /
• 제4권2호
• /
• pp.67-72
• /
• 2005

본 연구에서는 비대칭 직렬 연결 결합 선로에 기반한 새로운 결합 선로 결합기 구조를 제안하였다. 제시된 구조는 종래의 단일 결합 선로 결합기에 비해 보다 작은 크기로 설계, 제작될 수 있는 장점을 가진다. 또한 주어진 구조로부터 추가로 얻을 수 있는 설계 자유도를 이용하여 결합기의 출력 위상 조절이나 복잡한 회로 환경에서 결합기 레이아웃을 좀더 다양하게 하는 등 다른 목적으로도 효과적으로 이용될 수 있다.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.732-738
• /
• 2015

In ac discharge, emission efficiency shows an time-varying characteristics during discharge. The phenomenon is caused by the potential distribution changes during the discharge, which indicates that a specific potential distribution can contribute to a high improvement of the emission efficiency. To create an artificial environment for a potential distribution favorable to emission efficiency, we used the asymmetric electrode structure and proved the capability. Our results showed that the ratio of the area of anode to cathode became larger, the emission efficacy was greatly improved.

• Fibers and Polymers
• /
• 제4권1호
• /
• pp.15-19
• /
• 2003

The self-assembly of asymmetric ABC triblock copolymers in the ordered structure is investigated using an isothermal-isobaric molecular dynamics simulation. Unlike symmetric A BC triblock copolymers, more fascinating mophologies are observed in asymmetric ones because of a larger difference of incompatibility between the components. Various modes of self-assembly in assymmetric ABC triblock copolymers are also observed depending on the block composition. When the composition of block A Is changed from 0.125: to 0.25 at the same $f_B$ : 0.25, the morphological transition from the “cylinder in cylinder” to “cylinders at cylinder” structure is observed in the simulation. In the case of ABC triblocks with $f_B$=0.5, a lamellar-type structure is changed to a cylinder-type structure with increasing the length of block A. When the midblock length increases further to $f_B$=0.625, the “spheres on cylinder” structure is observed in both the $A_{10}$$B_{50}$$C_{20}$ and $A_{20}$$B_{50}$$C_{10}$ triblocks. From these results, the phase diagram of ABC triblock copolymers can be constructed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.229-236
• /
• 2004

In this paper, the effect of permanent magnet overhang structure on the characteristics in Brushless DC motor has analyzed quantitatively. We classified the overhang structure as symmetric and asymmetric. 3D equivalent magnetic circuit network (EMCN) method which uses the permeance as the distributive variable is used for the efficient analysis of magnetic field. The overhang effect which increases the linkage flux at the stator is verified by comparison between overhang and no overhang structure. In addition, it is known that no load back electro motive force (EMF) is also increased due to the overhang effect. In case of asymmetric overhang structure, the ratio effect of the upper to lower overhang length on the magnetic forces is analyzed. Form the analysis results, the variation of the asymmetric overhang ratio has a significant effect on the axial magnetic force except the radial and tangential magnetic forces. The validity of the analysis results is also clarified by comparison between calculated results and measured ones such as back EMF and cogging torque.

• Communications for Statistical Applications and Methods
• /
• 제25권2호
• /
• pp.217-234
• /
• 2018

Copulas are a tool for constructing multivariate distributions and formalizing the dependence structure between random variables. From copula literature review, there are a few asymmetric copulas available so far while data collected from the real world often exhibit asymmetric nature. This necessitates developing asymmetric copulas. In this study, we discuss a method to construct a new class of bivariate asymmetric copulas based on products of symmetric (sometimes asymmetric) copulas with powered arguments in order to determine if the proposed construction can offer an added value for modeling asymmetric bivariate data. With these newly constructed copulas, we investigate dependence properties and measure of association between random variables. In addition, the test of symmetry of data and the estimation of hyper-parameters by the maximum likelihood method are discussed. With two real example such as car rental data and economic indicators data, we perform the goodness-of-fit test of our proposed asymmetric copulas. For these data, some of the proposed models turned out to be successful whereas the existing copulas were mostly unsuccessful. The method of presented here can be useful in fields such as finance, climate and social science.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.208-211
• /
• 1999

Abstract - Electrical characteristics or asymmetric n-MOSFET's with different source and drain geometry are experimently investigated using test structures having various gate width. Saturation drain current and resistance in linear region are estimated by a simple schematic model, which consists of conventional device having parasitic resistor. A comparison of experimental results of symmetric and asymmetric devices gives the parasitic resistance caused by abnormal device structure. The suggested model shows good agreement with the measured drain current for both forward- and reverse-modes.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.55-61
• /
• 1999

A convolution algorithm combined with Fourier transformation is applied to the tomographic reconstruction of the asymmetric soot structure to identify the local soot volume fraction distribution. The line of sight integrated data from light extinction measurement with multi-angular scanning form basic information for the deconvolution. Multi-peak following interpolation technique is applied to obtain the effect of increasing number of scanning angles. Measurement of LII signal for the same flame shows the validity of this reconstruction technigue.