• Earthquakes and Structures
• /
• v.24 no.4
• /
• pp.303-316
• /
• 2023

Rapid post-earthquake damage estimation of subway stations is particularly necessary to improve short-term crisis management and safety measures of urban subway systems after a destructive earthquake. The conventional Performance-Based Earthquake Engineering (PBEE) framework with constant earthquake occurrence rate is invalid to estimate the aftershock risk because of the time-varying rate of aftershocks and the uncertainty of mainshock-damaged state before the occurrence of aftershocks. This study presents a time-varying probabilistic seismic risk assessment framework for underground structures considering mainshock and aftershock hazards. A discrete non-omogeneous Markov process is adopted to quantify the time-varying nature of aftershock hazard and the uncertainties of structural damage states following mainshock. The time-varying seismic risk of a typical rectangular frame subway station is assessed under mainshock-only (MS) hazard and mainshock-aftershock (MSAS) hazard. The results show that the probabilities of exceeding same limit states over the service life under MSAS hazard are larger than the values under MS hazard. For the same probability of exceedance, the higher response demands are found when aftershocks are considered. As the severity of damage state for the station structure increases, the difference of the probability of exceedance increases when aftershocks are considered. PSDR=1.0% is used as the collapse prevention performance criteria for the subway station is reasonable for both the MS hazard and MSAS hazard. However, if the effect of aftershock hazard is neglected, it can significantly underestimate the response demands and the uncertainties of potential damage states for the subway station over the service life.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.194-202
• /
• 2018

Health impact assessment in South Korea is carried out within the framework of Environmental Impact Assessment (EIA). And, public health and hygiene items in EIA as an evaluation of health impact items were designed to calculate the emission level of hazardous air pollutants from specific development projects, and the exposure concentration at major sites, and to assess the health risk associated with these projects. But, the assessment of the receptor characteristics around the development project is limitedly considered. The purpose of this study is to propose the method of calculation of potential exposed population and the use of it for public health and hygiene items in EIA. The data for the calculation of potential exposed population in South Korea were identified. And the calculation algorithm based on them was proposed. After that, in a development of industrial complex, a case analysis was carried out assuming the release of hazardous air pollutants. This study suggested that the concept of population risk should be applied in risk assessment utilizing the potential exposed population and as a future study, a standard of assessment of health effects for population risk should be established. Finally, the possibility of using this study as a location-limiting tool for the development project was presented through the method of calculating the potential exposed population. It is meaningful that this study presented a method for performing risk assessment from the perspective of receptors around a development project.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.5
• /
• pp.366-373
• /
• 2020

The task of defining the concept of 'disability' has proven to be surprisingly difficult. The way disability is assessed in the world suggests that very different conceptions of disability are being presumed. It is very hard to suggest appropriate criteria for assessing a disability that accurately demonstrates the presence and measures the severity of the disability, with proven consistency and validity provided by the assessors consuming the time and cost that the society can afford. When a rigorous framework in disability assessment procedures is used, discretion is then considerably restricted. Limited discretion tends to produce more consistency and validity in the assessment but at the cost of ignoring the individual differences or exceptional circumstances. The disability approach among the categories of the disability assessment is both the oldest and the most commonly used strategy of disability assessment around the world. Most of the criteria of disability assessment in Korea belongs to this. The McBride's criteria for disability evaluations can be used to obtain the ratio of body impairment and work disability without spending too much time and is being applied in court. Nevertheless, there are many errors and controversies, and corrections are required. On the other hand, an improvement plan for a disability evaluation method in Korea is to supplement and use the McBride's disability assessment method, which is currently the most widely used. This review article describes the conception of disability and the assessment of disability, and introduces the models of the assessment of disability to determine if the application of the McBride's criteria of disability evaluation can be justified.

• Therapeutic Science for Rehabilitation
• /
• v.13 no.3
• /
• pp.51-67
• /
• 2024

Objective : This study investigated trends in the use of assessment tools by occupational therapists working with adults and older adults. Methods : Occupational therapists were surveyed to gather data on general characteristics, assessment tool usage, assessment time and frequency, usage trends by area, and education. The tools were categorized by the Occupational Therapy Practice Framework (OTPF) into Activities of Daily Living (ADL), Instrumental Activities of Daily Living (IADL), and play and leisure for occupations, and cognitive functions, motor functions, and psychosocial aspects for client factors. Data from 98 respondents were analyzed using frequency analysis and one-way ANOVA with SAS. Results : Most surveyed occupational therapists worked in university or general hospitals (40.82%). The assessment time per patient was under 30 min (62.25%), and re-assessment frequency was one~three months (68.38%). The most frequently used assessment tools by the OTPF were as follows: ADL: Modified Barthel Index (94.90%), IADL: Canadian Occupational Performance Measure (31.63%), cognitive functions: Mini-Mental Status Examination (89.80%), visual perception: Motor-free Visual Perception Test (56.12%), dementia: Global Deterioration Scale (63.27%), motor functions: Jamar Dynamometer & Pinch Gauge (59.18%), dysphagia: Video Fluoroscopic Swallowing Study (28.57%), physical examination: Range of Motion (59.18%), and psychosocial: Geriatric Depression Scale (33.67%). Conclusion : This study identified the use and rationale of assessment tools for occupational therapy in adults and older adults. These findings aim to enhance the curriculum and continuing education of occupational therapists.

• The Journal of Korean Academy of Sensory Integration
• /
• v.11 no.2
• /
• pp.41-56
• /
• 2013

Objective : The purpose of this study tried to present the performed average and range through systematic review about assessment tools that measures the praxis ability of sensory integrative function for foreign and domestic normal children. Methods: With making use of Medline, PubMed, Ovid, Eric, the Library of Congress, National Science and Technology Information Center, Kiss, RISS, and the Google search engine, we searched the name of assessment tool on the basis of the framework of the theory of sensory integration. Target paper was thesis and Journal published from January 2000 to April 2011. Results: Total of 24 papers were retrieved, used assessment tools were Bruininks-Oseretsky Test of Motor Proficiency (BOTMP), Bruininks-Oseretsky Test of Motor Proficiency, Short Form (BOTMP-SF), Bruininks-Oseretsky Test of Motor Proficiency, Second Edition (BOT-2), Bruininks-Oseretsky Test of Motor Proficiency, Second Edition, Short Form (BOT-2-SF), Clinical Observations of Motor and Postural Skills (COMPS), Motor Assessment Battery for Children (MABC), Clinical Test of Sensory Interaction with Balance (CTSIB), and subtest of Sensory Integration and Praxis Test (SIPT). We presented the average and range of assessment tools applied to normal children in each country. Conclusion: A performed result in other cultural and domestic normal children which this study presented will provide a standard in comparison with performance of children with disabilities who are the actual clinical evaluation.

• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.2
• /
• pp.182-195
• /
• 2023

The purpose of this study was to analyze reports from research middle schools based on the criteria for process-focused assessment to find out how the characteristics of process-focused assessment were being implemented in middle school science classes. The analysis criteria for the characteristics of process-focused assessment (integration of lessons and assessments, evaluation elements and methods, content and timing of feedback, and learner growth management) were extracted. Using the analysis framework, the result reports of seven research middle schools for process-focused assessment were analyzed. In terms of integration of lessons and assessments, when the process-focused assessment was operated, the class and evaluation plan were well implemented based on the curriculum achievement standards, but the process-focused assessment was recognized as a performance evaluation. In terms of evaluation elements and methods, the evaluation element for knowledge was the main component, and competency was presented in the planning stage, but competency was not dealt with in class execution. The evaluation method was biased toward teacher-centered observation evaluation and written test, and the setting of scoring criteria for each evaluation element was insufficient. In terms of the content and timing of feedback, feedback was mainly provided based on achievement confirmation, but no case was found in which scaffolding was provided at an appropriate time for insufficient parts in the learning process. In terms of the learner's growth management, the competencies cultivated through science classes were included in the detailed subject specialties of the school record. However, little was shown in the report on how to systematically manage the process of developing learners' competencies and reflect the evaluation results to teachers' class improvement.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.15.1-15.6
• /
• 2016

A number of absurdities surrounding the humidifier disinfectant (HD) incident may have occurred because 1) a judicial system operates on the underlying false assumption that the involved parties are equals in knowledge, information and resource mobilization capabilities, regardless of respective real status as company or individual; 2) there is a lack of a system that mandates a company to prevent and actively manage possible catastrophes; 3) the regulatory scheme makes companies believe that as long as they are complying with the existing regulations, they have satisfied all of their responsibilities. I believe that this issue is an opportunity to bring about changes in the judicial redress system, the system of internal management of manufacturers, and the regulatory system of the government. The following regulation amendments are needed to move towards the changes stated above. First, legislation relating to victim relief that is applicable to the HD incident must be established. Second, a risk management system must be formed within the manufacturing company and to this end an institutional environment for the system must be established within regulatory framework. Furthermore, legislation must be passed that could punish companies themselves that have caused severe damage to individuals because they had failed to take necessary actions to avoid foreseeable harm. Finally, the framework of regulation must be changed so that the company, who has the necessary information regarding the product and the component chemicals used in the product, must self-directed experiment and assessment of the safety of their own products.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.6
• /
• pp.1067-1075
• /
• 2019

Objectives: The present study aimed to compare the accuracy of removable partial denture (RPD) frameworks fabricated by selective laser sintering (SLS) before and after electropolishing. Methods: A partially edentulous mandibular model was used as the working model. Scanning of the model was performed using a dental scanner. The framework was designed using CAD software. The metal framework was formed using an SLS 3D printer. 3D scans of the two fabricated prototypes produced before and after electropolishing were overlapped with reference data. The fit was calculated based on Root Mean Square (RMS). Fabrication accuracy was verified using the paired t-test to compare the discrepancy before and after electropolishing. Results: The mean (SD) values of RMS before and after electropolishing were 126.6 (34.19) and 75.86 (21.36), respectively. There was a statistically significant difference before and after electropolishing (p<0.05). Conclusions: Metal frameworks made with SLS 3D printers showed clinically acceptable fit after electropolishing.

• Communications for Statistical Applications and Methods
• /
• v.17 no.5
• /
• pp.745-753
• /
• 2010

Compared to the U.S. Government Accountability Office(GAO) and the U.K. National Audit Office(NAO), the Board of Audit and Inspection of Korea(BAI) has not laid a rather solid system for effective assessment and judgment on the reliability of computer-processed data used as audit evidence in its public auditing activities. Accordingly, based on the experiences of GAO and NAO, this study suggests criteria and methods as the key elements of the methodological framework for assessing the reliability of information system data. Then, the usefulness and effectiveness of the criteria and techniques for assessing data reliability were tested and proved by applying to the analysis of allotment for mandatory disabled employment data that have been computer-processed and managed by the Korea Employment Agency for the Disabled(KEAD).

• Journal of the Korean Institute of Gas
• /
• v.5 no.2 s.14
• /
• pp.1-8
• /
• 2001

Fault tree construction for hazard assessment requires so much time and labor, so it is very difficult to be applied to the large scale chemical plant. In this study, for the synthesis of fault tree in chemical processes, the object-oriented knowledge framework is proposed to represent the deviations of process variables in the equipment and cause-consequence relationship with equipment faults. The cause of fault is searched by using the object-oriented modeling of equipments and the connectivity among equipments, and then a fault tree is synthesized. we have discussed the performance of the methodology on nitric acid cooling process to evaluate its effectiveness.