• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.91-92
• /
• 2006

The fine-tuned dendrons provide unique supramolecular self-assemblies in various environments such as in water, organic media, and solid-liquid interfaces. They form nanotubes, vesicles, thin films, columns, lamellar nanoribbons depending on the condition of self-assembly process. Unique characteristics of self-assembly of the amide dendrons are described. In addition, elucidation of the structural correlation between the building blocks and the assemblies, stabilization of assembled structure, and transformation of supramolecular assemblies by using external stimuli. Particular emphasis is placed on the formation of cyclodextrin-covered organic nanotubes derived from self-assembly of amide dendrons and their supramolecular transformation. Finally, unique biosensory characteristics of the self-assembled nanotubes will be discussed.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.7-12
• /
• 2008

Today, manufacturers are forced to acknowledge that the life cycles of products are becoming shorter. In the case of the door trim assembly field, the highly frequent introduction of new products and the continuous increase in product varieties leads to the demand for redesigning assembly systems more often. Modular manufacturing systems can be an important issue in helping to overcome these problems. This paper presents the development of a modular assembly system for the door trim, and because it takes the change drives into consideration, this system is highly flexible in adapting to changes in the environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.36-43
• /
• 1992

In this paper, a robot assembly wrist, which is able to assemble chamferless parts, has been developed. The RCC (Remote Center Compliance) structure is used as a basic structure. 5 position sensors and 4 pneumatic actuators are installed additionally to measure the deformation of RCC structure and correct the errors actively. Due to the restricted direction of actuation, a decision rule which selects the suitable actuator according to the position sensor signals is needed. For this purpose, a neural network is used and it is experimentally shown that the nerual network overcomes system's nonlinearity. This paper presents fundamental experiment results for the insertion of parts with several clearance.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.142-149
• /
• 1997

This study is intended to develop a Feature based modeler. It is difficult to integrate CAD and CAM/CAPP with information that is given only by a conventional CAD system. Therefore a lot of studies have concentrated on a Feature based CAD system. But conventional Feature based modelers have had limitation on providing sufficient information related to Feature interaction. If a Feature based modeler is to be used in assembly simulation, a new Feature-based modeling method needs to be developed. Also to support collision detection between parts, we have to handle Feature interaction systematically. Therefore we suggest Cell data structure which handles interaction of Features by volume. The volume created by Feature interaction is saved as a Cell. With the Cell structure we solve problems involved with Feature interaction. This study shows how the Cell data structure can manage Feature interaction and give enough information in assembly simulation.

• Journal of Integrative Natural Science
• /
• v.1 no.2
• /
• pp.76-78
• /
• 2008

A series of the long-chain iron(II) alkylsulfonate hydrates were synthesized via self-assembly of surfactant alkyl chains in aqueous medium. Reaction of iron(II) salts with n-alkylsulfonate yields lamellar $Fe(CnH2n+1SO3)2{\cdot}4H_2O$. These compounds show a layered structure, as determined by XRD, consisting of alternating organic alkylsulfonate layers and inorganic iron(II) hydrate layers, with interlayer distances of upto 3.2 nm. This lamellar structure may be attributed to the amphiphilic nature of the surfactants, mediating the coordination and H-bionding interactions, and the hydrophobic alkyl chains. An alkyl chain packing of present system are differ from those of similar Cu(II) series, which are attributed from the size of hydrated metal(II) ions.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.3 s.52
• /
• pp.27-32
• /
• 2003

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. The geometric inaccuracy caused by the distortion tends to preclude the introduction of automation and mechanization. Thus, additional man-hours are needed for the adjusting work in the assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method that can explicitly account for the influence of various factors on the welding distortion. In order to minimize the weld-induced residual deformation, this paper proposes the optimum welding sequence as a method for distortion control. The validity of this method has been substantiated by a number of numerical simulations and experiments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.573-581
• /
• 1999

액체 금속로(LMIR) 핵연료교환장치의 기본설계를 위해서는 여러 분야(예를 들면, 기구학, 동역 학, 재료역학 등)의 해석을 동시에 수행해야 한다. 그러나 이와 같은 해석들은 각각 별개로 연속적으로 수행되는 것이 아니라, 상호 유기적인 연관을 갖고 수행되어야 한다. 이와 같은 해석에 적합한 기법이 MDO 기법이다. 본 논문에서는 MDO기법에 의한 핵연료교환장치 구조해석의 한 단계로 핵연료교환장치의 기구 동역 학 해석을 수행하여 핵연료 교환장치 작동에 대한 기구운동학적 특성 및 동역학적 특성을 분석하였다. 분석결과 해석대상 핵연료교환장치는 예상한대로 원활하게 작동됨이 확인되었다. 아울러 이 분석 결과를 토대로 핵연료교환장치의 정적 휨 변형을 구하기 위한 재료역학해석에서 요구되는 정적구조를 결정하였다.

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.91-99
• /
• 2007

Modernity which is superficial phenomenon set off the mass scale for mass consumption and provide uniformly artificial environment. But natural destruction, environment pollution, resources exhaustion and so on has been caused by this and now ecology is threatened by destruction and damage beyond the limitation and human beings survival is even threatened. Accordingly furniture development for environment preservation considered environment problem is the urgent real situation. Recent paradigm is the concept of Eco-design which is the green design possible to live together in symbiosis, and new types of alternative furniture are needed in Korea as well. 'Furniture for disassembly' is presented as new method for alternative furniture. Furniture for disassembly can be presented by mainly two directions. The first main characteristic is what is assembled by the use of woodworking joints technique as an assembly structure system without any hardware. The second is what is presented as the structure possible to be assembled by simple manual tools with hardware without any glue. The advantages of furniture for disassembly are environment preservation, space application, transportation efficiency and shapeliness. In manufacture method which is different from present furniture, the application of traditional truss technique which uses various types of custom-made and connection technique in case of assemble structure system without hardware is the typical differences. This assembly method expects not only interest induction about assembly and disassembly of diagram per sub materials but also the development of emotion, the improvement of collaboration, space perception ability and shape sense, the improvement of solid body structure insight and so on, when it use in the furniture for children with the application to many kinds of structure with BANGDOOSANJ (Wedged), JUMUGJANGBU (Dovetail) or NABIEUNJANG (Dovetail Keys) and so on.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.353-359
• /
• 2017

The sonophoresis, a representative low-intensity ultrasonic therapy, is a technique for delivering the drugs into the epidermis, dermis and skin appendages by using physical vibration and heat effects of the ultrasonic waves. Sonophoresis could increases the delivering and absorption efficiency of the drugs usually consisting of hydrophilic molecules and macromolecules. In addition, it has the advantage of being effective in delivering drugs with relatively large molecular sizes such as insulin or lipid. In this study, we proposed a multi-structure ultrasonic transducer assembly with a large-size single piezoelectric element and a drug delivery function at the treatment site for efficient sonophoresis treatment. Futhermore, a transducer assembly structure capable of raising and maintaining the temperature of the treatment site was proposed and evaluated for effectiveness. The transducer assembly proposed in this study is expected to improve the efficiency of sonophoresis by providing a constant amount of drug, and assisting drug delivery through heating the treatment site.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.471-491
• /
• 2016

Traditional limit equilibrium method needs an assumption of the failure surface to calculate the bearing capapcity of the shallow foundation. From the viewpoint of the mechanics of granular materials, however, the failure of the soil mass is initated by the local buckling of the contact force chains. In this study we observed the directional distribution of the contact force chains in the granular assembly stacked by model particles subjected to the model shallow foundation during loading. Two sets of the assemblies with a regular structure and initially local imperfection were prepared for tests. Existence of the initial local imperfection has a significant effect on the directional distribution of the contact force chains. The bearing capacity of the assembly with local imperfection is only 67% the capacity of the assembly with the regular structure.