• Journal of Pharmaceutical Investigation
• /
• v.21 no.3
• /
• pp.179-188
• /
• 1991

An HPLC assay method of a drug to be applied to the pharmacokinetic studies of the drug should be completely validated. The validation process for an HPLC assay method in a biological sample was discussed using the data obtained from the development of HPLC method for the simultaneous quantitation of verapamil and norverapamil in human serum. The validation criteria included were specificity, linearity, accuracy, precision, sensitivity, recovery, drug stability, and ruggedness of an assay method.

• Microbiology and Biotechnology Letters
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2008

Validation of viral safety is essential in ensuring the safety of mammalian cell culture-derived biopharmaceuticals, because numerous adventitious viruses have been contaminated during the manufacture of the products. Mammalian cells are highly susceptible to minute virus of mice(MVM), and there are several reports of MVM contamination during the manufacture of biopharmaceuticals. In order to establish the validation system for the MVM safety, a real-time PCR method was developed for quantitative detection of MVM in cell lines, raw materials, manufacturing processes, and final products as well as MVM clearance validation. Specific primers for amplification of MVM DNA was selected, and MVM DNA was quantified by use of SYBR Green I. The sensitivity of the assay was calculated to be $6{\times}10^{-2}TCID_{50}/mL$. The real-time PCR method was proven to be reproducible and very specific to MVM. The established real-time PCR assay was successfully applied to the validation of Chinese hamster ovary (CHO) cell artificially infected with MVM. MVM DNA could be Quantified in CHO cell as well as culture supernatant. When the real-time PCR assay was applied to the validation of virus removal during a virus filtration process, the result was similar to that of virus infectivity assay. Therefore, it was concluded that this rapid, specific, sensitive, and robust assay could replace infectivity assay for detection and clearance validation of MVM.

• Biomolecules & Therapeutics
• /
• v.13 no.1
• /
• pp.59-63
• /
• 2005

A kinetic assay was carried out in order to compare the ability of detection for prekallikrein activator(PKA) in plasma-derived products with that of an endpoint assay and a commercial method. Using these methods, 9 human albumin preparations were assayed and compared to each other. The coefficient of variation between the Kinetic assay and the end point assay was found within 6.6% and this result showed that two methods were highly correlative and the end point assay could act as a replacement of the kinetic assay. Another important goal of this study was to investigate the reproducibility among laboratories on the kinetic assay. A collaborative study was performed to validate the kinetic method with intra and inter assays. The coefficient of variation for the intra assay of each laboratory was less than 4% and that for between individuals in the inter assay was 4.1%. These results revealed that the kinetic assay showed good reproducibility. The contents of PKA in plasma-derived products were also determined by the kinetic assay. As a result, it was found that trace amounts of PKA were present in 32 human immunoglobulin preparations, however the average concentration of PKA in 171 albumin preparations was 5.8 IU/mL.

• Journal of Korean Medical Science
• /
• v.33 no.51
• /
• pp.340.1-340.14
• /
• 2018

Background: Various pneumococcal vaccines have been evaluated for immunogenicity by opsonophagocytic assay (OPA). A multiplexed OPA (MOPA) for 13 pneumococcal serotypes was developed by Nahm and Burton, and expanded to 26 serotypes in 2012. The development of new conjugate vaccines with increased valence has necessitated expanded MOPAs to include these additional serotypes. In this study, we validated this expanded MOPA platform and applied to measure antibodies against 11 additional serotypes (2, 8, 9N, 10A, 11A, 12F, 15B, 17F, 20B, 22F, and 33F) in human sera. Methods: All materials, including serum, complement, bacterial master stocks, and HL-60 cells, were evaluated for assay optimization. Following optimization, the assay was validated for accuracy, specificity, and intra- and inter-assay precision with sera from adult donors following standard protocols. The assay was applied to evaluate functional antibodies of 42 sera immunized with 23-valent pneumococcal polysaccharide vaccine (PPV23). Results: The expanded MOPA platform was specific for all serotypes, with the exception of serotype 20. The assay results were highly correlated with those obtained from single-serotype OPA, indicating acceptable accuracy. The coefficients of variation were 7%-24% and 13%-39% in tests of intra- and inter-assay precision, respectively, using three quality-control samples. A MOPA that included 11 additional serotypes in the PPV23 was established and validated with respect to accuracy, specificity, and precision. The opsonic indices of immune sera were obtained using this validated assay. Conclusion: The expanded MOPA will be useful for evaluation of the immunogenicity of PPV23 and future conjugate vaccine formulations.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.3
• /
• pp.298-308
• /
• 1993

Immunochemical assay, ELISA for small molecules such as pesticides are rapid, sensitive, cost effective and can easily analyze with large samples. ELISA is one of several powerful biotechnologies immediately applicable to pesticide analysis. This review lists the advantages and disadvantages of the ELISA and elucidate the steps in assay development using examples from this laboratory. The focus is primarily on hapten synthesis strategies, protein conjugation, Immunization, assay format, and assay validation.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1923-1926
• /
• 2006

• Toxicological Research
• /
• v.16 no.2
• /
• pp.109-116
• /
• 2000

The purposes of our study were to optimize the conditions of the screening and testing methods for endocrine disruptors, to characterize these assays using several compounds with well-defined endocrine activity, and to compare the sensitivity between these assays currently undergoing validation. Two in vitro test systems, MCF-7 cells proliferation (E-screen assay) and competitive binding to estrogen receptors (ER) were selected to evaluate the estrogenic effects. 17$\beta$-Estradiol (E2) and diethylstilbestrol (DES) were used as a positive control in vitro test. Also, E2 and ethinyl estradiol (EE) were used as a positive control in vivo uterotrophic assay. In in vitro test, E2 and DES showed a strong estrogenic response at concentration of 1.0 nM. In uterotrophic assay, E2 (0.3 $\mu\textrm{g}$/kg) and EE (0.3 $\mu\textrm{g}$/kg) produced a significant increase in uterus and vagina weight in both immature and ovariectomized rats. Although we did not com-pared the specificity between in vivo and in vitro assays, these assay systems may serve as a good tool for endocrine disruptors screening methods. Our data indicate that these assay systems exhibit some difference in their sensitivity to the same estrogenic compounds. Therefore, as a first rapid screening assay for estrogenic activity qf unknown chemicals, at least two assay systems should probably be carried out with a view of high sensitivity and standardization conditions. Also, a careful validation tests are necessary to obtain a reasonable degree of reproducibility.

• Analytical Science and Technology
• /
• v.30 no.3
• /
• pp.154-158
• /
• 2017

The Korean Pharmacopoeia (KP XI), British Pharmacopoeia (BP 2013) and Japanese Pharmacopoeia contain monographs for the quality control of raw fusidate sodium and its formulations using high performance liquid chromatography (HPLC). However, the assay method for the determination of fusidate sodium in commercial tablets is titration which is less specific than HPLC. In this study, we present an alternative HPLC method for quantitation of fusidate sodium in tablets. Method validation was performed to determine linearity, precision, accuracy, system suitability, and robustness. The linearity of calibration curves in the desired concentration range was high ($r^2=0.9999$), while the RSDs for intra- and inter-day precision were 0.25-0.37 % and 0.11-0.60 %, respectively. Accuracies ranged from 99.46-100.85 %. Since the system suitability, intermediate-precision and robustness of the assay were satisfactory, this method will be a valuable addition to the Korean Pharmacopoeia (KP XI).

• Korean Journal of Microbiology
• /
• v.44 no.3
• /
• pp.228-236
• /
• 2008

Validation of viral safety is essential in ensuring the safety of mammalian cell culture-derived biopharmaceuticals, because numerous adventitious viruses have been contaminated during the manufacture of the products. Mammalian cells are highly susceptible to Reovirus type 3 (Reo-3), and there are several reports of Reo-3 contamination during the manufacture of biopharmaceuticals. In order to establish the validation system for the Reo-3 safety, a real-time RT-PCR method was developed for quantitative detection of Reo-3 in cell lines, raw materials, manufacturing processes, and final products as well as Reo-3 clearance validation. Specific primers for amplification of Reo-3 RNA was selected, and Reo-3 RNA was quantified by use of SYBR Green I. The sensitivity of the assay was calculated to be $3.2{\times}10^0\;TCID_{50}/ml$. The real-time RT-PCR method was proven to be reproducible and very specific to Reo-3. The established real-time RT-PCR assay was successfully applied to the validation of Chinese hamster ovary (CHO) cell artificially infected with Reo-3. Reo-3 RNA could be quantified in CHO cell as well as culture supernatant. When the real-time RT-PCR assay was applied to the validation of virus removal during a virus filtration process, the result was similar to that of virus infectivity assay. Therefore, it was concluded that this rapid, specific, sensitive, and robust assay could replace infectivity assay for detection and clearance validation of Reo-3.

• Analytical Science and Technology
• /
• v.31 no.3
• /
• pp.107-111
• /
• 2018

Currently, ultraviolet-visible spectrophotometry and titration methods are used for assay tests of tramadol hydrochloride injection and raw material in the Korean Pharmacopoeia XI (KP XI). Titration has also been used in the British Pharmacopoeia (BP 2013) for the assay test of tramadol hydrochloride, and the HPLC assay for tramadol hydrochloride raw material has been used in the United States Pharmacopeia (USP 39). In this study, we developed an alternative HPLC assay method for tramadol hydrochloride injection that is up to date and specific, and employs the same method as tramadol hydrochloride capsules. Validation of the HPLC method was conducted to determine linearity, precision, accuracy, system suitability, and robustness. The linearity of the calibration curves in the desired concentration range was good ($r^2$ > 0.9999). RSDs of intra-day precision obtained were 0.05-0.08 % and inter-day precision obtained were 0.08-0.19 %. Accuracy was obtained with recoveries in the range of 98.16 % and 100.90 %. As a result of the system's suitability, the RSD of both retention time and the peak area obtained were 0.07 %. The values of the plate number and tailing factor of tramadol hydrochloride obtained were 7076 and 1.16, respectively. Because of the intermediate precision and robustness of the developed assay, it is expected to become a valuable tool for revising the Korean Pharmacopoeia (KP XI).