• 한국토양비료학회지
• /
• 제38권2호
• /
• pp.72-77
• /
• 2005

Fly ash의 zeolite화 과정에서 제한인자로 작용하는 Alumuinum을 인위적으로 첨가하여 zeolite 결정에 미치는 영향과 zeolite 합성과정에서 다량으로 발생되는 NaOH 폐용액의 재사용이 zeolite의 품질에 미치는 영향을 조사하였다. 첨가된 aluminum은 zeolite 결정구조의 급원으로 이용되어 zeolite의 품질이 크게 향상되었다. Aluminum을 첨가하여 12시간 동안 합성한 zeolite는 첨가하지 않은 zeolite에 비해 CEC는 $285cmol_c\;kg^{-1}$에서 $365cmol_c\;kg^{-1}$으로 증가하였으며, 결정화도는 44.3%에서 57.1%로 증가되었다. Aluminum을 첨가하면서 NaOH 폐용액을 연속으로 5회 재사용하여도 반응생성물의 CEC와 결정화도에는 거의 영향을 미치지 않았다. 또한 NaOH 폐용액의 재사용 휫수가 증가하여도 zeolite의 화학적 조성은 거의 변화되지 않았다. 그러므로 fly ash의 zeolite화 과정에서 aluminum 첨가에 의한 zeolite의 품질은 물론 알칼리 폐용액의 재사용으로 활성효율을 크게 향상시킴으로서 환경적 경제적 부담을 경감시킬 수 있을 것이다.

• 콘크리트학회지
• /
• 제7권6호
• /
• pp.209-215
• /
• 1995

철근의 부식은 철근콘크리트 구조물의 열화에 가장 영향이 큰 요소이며, 염화물 이온에 의한 염해는 철근부식을 일으키는 가장 일반적인 원인 중의 하나이다. 본 연구는 콘크리트의 성능개선과 내구성 향상을 위해 사용량이 증가하고 있는 플라이 애쉬의 시멘트 경화체 내에서의 $Cl^-$고정화에 미치는 영향을 검토하기 위해 밀봉용기 내에서 양생시킨 재령28일 공시체의 세공용액을 추출하여 세공용액 중의 $Cl^-$, $OH^-$농도 측정과 세공용액 추출용과 같은 배합 공시체의 증발수량 측정으로 세공용액량 및 시멘트 페이스트내에서의 $Cl^-$ 고정화량을 산정한 것이다. 연구결과 플라이 애쉬 치환이 시멘트 경화체내 세공용액의 $Cl^-$농도와 프리델씨염 생성량 및 고정화량 증가에 미치는 영향은 거의 없고, 철근부식에 관계하는 $Cl^-$/$OH^-$는 증가하는 것으로 나타났다.

• 자원리싸이클링
• /
• 제15권5호
• /
• pp.47-51
• /
• 2006

국내 생활쓰레기 소각시설에서 발생되는 소각재의 양은 2005년 경우 약 420,000톤에 달하고 있으며, 그중 비산재 발생량은 약 68,000톤에 달하고 있다. 비산재는 지정폐기물로 분류되어 일반적으로 고형화 및 안정화 처리 후 매립되고 있으며, 단지 발생량의 약 20%만이 재활용되고 있다. 비산재의 경우 CaO의 함량이 50%까지 이르고 있으며, 그 이유는 배가스 처리시 CaO를 기본으로 하는 물질을 다량으로 사용하기 때문이다. 본 연구에서는 비산재에 함유되어 있는 CaO를 회수하여 $CaCO_3$ 분말을 제조하기 위한 기초실험을 수행하였다. CaO를 선택적으로 용해하기 위하여 설탕용액을 사용하였으며, 기초 실험결과에 의하면 CaO용해를 위한 최적조건은 비산재 농도 10%, 반응시간 15분, 설탕농도 $10{\sim}15%$ 및 적정 pH는 $10.5{\sim}11$로 나타났다. $CaCO_3$ 분말은 회수된 CaO 용해액에 $CO_2$가스를 주입시켜 제조하였으며 회수된 $CaCO_3$ 백색도는 매우 우수한 것으로 조사되었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.202-210
• /
• 2005

In this study, the fly ash was employed as a possible alternative to the bentonite for its high sorption capacity against cationic heavy metal. To consider the constituents of barrier possibly used, the specimens were mixed with different material contents (fly ash : weathered soil : bentonite), then sorption test was performed. Also the specimens were molded on the wet side of optimum moisture contents like mixing ratio of sorption test and their hydraulic conductivities were measured in flexible-wall permeameters. And to confirm the effect of dissolved cations, the hydraulic conductivity tests were repeated by converting the permeant liquids from water to $Cd^{2+}$ solution. Finally, the Cd-concentration at the effluent was analyzed for 500hrs to compare the effectiveness of each specimen in contaminant retardation. Test results showed that the more the ratio of fly ash increase, the more Kd value increase, and the hydraulic conductivity of weathered soil/bentonite (95:5) mixture was the lowest $(2.9*10^{-8}cm/sec)$, and specimens made of fly ash and fly ash/weathered soil mixtures showed similar hydraulic conductivity. Although the permeant liquid was changed from water to $Cd^{2+}$ solution, the hydraulic conductivity of all specimens except for weathered soil maintained similarly like before. Consequently, the initial breakthrough point of Cd in weathered soil specimen was observed at about 5hrs after the test started while that of fly ash specimens was not observed during the whole test period of 500hrs. The results implied that fly ash had a sufficient retardation capacity against contaminant transport possibly by its high sorption capacity although it showed little effect on the reduction of hydraulic conductivity. Based on the test results, it could be concluded that the fly ash can be possibly used as a suitable barrier material in containment system to attenuate the contaminant transport for its high retardation capacity and for the low cost.

• 생물환경조절학회지
• /
• 제10권2호
• /
• pp.88-94
• /
• 2001

Ash ball 배지의 이화학적특성과 사용배지의 염류집적 및 제거효과를 펄라이트 및 입상암면과 비교하였다. ash ball의 가비중, 진비중, 공극율은 각각 0.93 g.$cm^{-3}$, 2.29 g.$cm^{-3}$, 40.6%, 59.4%로서 그중 가비중은 펄라이트 및 입상암면에 비해 현저히 높았고 가공율은 낮았다. 배지의 포화수분함량(saturation moisture capacity)은 ash ball이 52%, 펄라이트가 71%, 입상암면이 90%로 나타났고, 배수 1시간 후 수분율은 ahs ball이가 21%, 펄라이트가 27%, 입상암면이 80%로 낮아졌다. Ash ball의 입도별 수분율은 소립(3~5 mm)이 대립 (7~15mm)에 비해 5% 정도 높았다. Ash ball의 배드내 수분율은 수직 및 수평방향의 분포가 균일하여 수분확산성이 좋은 것으로 나타났다. ash ball의 pH는 7.6으로 약염기성을 나타내었다. 배지를 침지한 배양액의 pH는 7.6으로 약염기성을 나타내었다. 배지를 침지한 배양액의 pH는 다소 증가하는 경향을 보였으며 EC는 거의 변호가 없었으며, 배지내 무기이온의 흡착은 ash ball과 입상암면은 인산의 흡착이 비교적 많았다. 토마토 재배에 사용된 ash ball의 염류집적은 펄라이트와 비슷하였고 8회 정도의 침수처리로 배지표면에 흡착된 무기염을 대부분 제거할 수 있었다. 위의 결과로부터, ash ball 배지는 보수력은 다소 낮지만 통기성 및 수분확산성이 우수하여 배지내의 수분조절이 용이한 배지임을 알 수 있었다.

• 한국해양공학회지
• /
• 제25권3호
• /
• pp.40-46
• /
• 2011

This paper describes the effects of fly ash replacement on the sulfate resistance of antiwashout underwater concrete which was replaced cement by fly ash from 0% to 50%. and the experimental works were performed on sulfate acceleration test of 5%$Na_2SO_4$ solution to find out the variance of length and weight of specimens. The experimental result shows that the length of specimens of antiwashout underwater concrete age at 180day was highly increased compare with normal concrete by acceleration test. but the mixture which was replaced 50% of fly ash shows reduction of the expansion, weight various, compare with normal concrete specimen. accordingly by using fly ash as admixture in antiwashout underwater concrete in sea environment, it will makes more durable for the attacks of sulfate by sea water.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.395-400
• /
• 2008

This paper indicates the investigation about the development of ET (Environmental Technology) industrial geopolymeric materials from mixture silica mine waste, coal fly ash and alkali activator solution (sodium silicate) by the geopolymer technique at ambient temperature. The results showed that higher compressive strength of geopolymeric mortar increased with a reduce of L/S ratio and increased along with an increase of coal fly ash content. The compressive strengths of geopolymer mortar on low silica of C Silica Mine and K Silica Mine are 18.7 MPa, 20.4 MPa, respectively. Compressive strength of geopolymeric mortar depends on L/S ratio and coal fly ash content added.. Additionally, scanning electron microscope (SEM) techniques are used to characterize the microstructure of the geopolymeric mortars. SEM observation shows that it is possible to have amorphous aluminosilicate gel within mortar. XRD patterns indicate the fact that geopolymeric mortar is composed of amorphous aluminosilicate phase, calcite and quartz.

• Carbon letters
• /
• 제8권1호
• /
• pp.1-5
• /
• 2007

The use of low cost and ecofriendly adsorbent has been investigated as an alternative to the current expensive method of removing dyes from wastewater. Cow dung cakes were collected from the nearby village which was burnt in a muffle furnace at $500^{\circ}C$ to obtain the required ash. This paper deals with the removal of Reactive Blue 221, Acidoll Yellow 2GNL and Olive BGL which are mainly used in textile industry, from aqueous solution by cow dung ash without any pretreatment. The adsorption was achieved under different pH, adsorbate concentration and the applicability of Langmuir and Freundlich isotherms were examined.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.33-41
• /
• 1997

This paper surveys the extraction condition of polygenetic natural dye, Sappan Wood and the effect of ash to the dyeability and fastness. The appropriate time for extracting Sappon Wood was 1hour. The pH was increased as the amount of ash increase. The pH was nearly invariable according to the time of ash solution, the extracting times and temperature. Absorbance of dyeing fabrics was about 480nm. From the result of K/S value determination of fabrics, 10g/$\ell$ quantity of ash was surfficient for treatment and the amount of Sappon Wood was in 100% o.w.f.. K/S value of fabrics pre-mordanted or post-mordanted were higher than that of fabrics simultaneous mordanted.K/S value was increased as pH of mordanting bath decrease and pre-mordanting and post-mordanting fabrics increased the amount of absorption (K/S value) compared with non-mordanted fabrics. It was found that pH of mordanting bath affected the amount of absorption and color change of dyed fabrics. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the mordanting conditions and methods.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.334-340
• /
• 2002

$TiO_2$-coated fly ash was synthesized by dropping method of coating agent in order to get $TiO_2$ coating layer with high photocatalytic activity on the surface of coal fly ash. The properties of the $TiO_2$ coating layer such as morphology, crystal structure, crystal size and photocatalytic activity were compared with those of the $TiO_2$-coated fly ash prepared by the traditional method of precipitation. $TiCl_4$ aqueous solution was used as a titanium stock solution and $NH_4HCO_3$ was used as a precipitant. The $TiO_2$ coating layer obtained by dropping method of coating agent was more uniform than that coated by precipitation. However, the crystal of $TiO_2$ coated by dropping method of coating agent was easy to grow by heat treatment because of the small primary particle size and bulky morphology, and its photocatalytic activity was consequently lower than that of the $TiO_2$ coated by precipitation. The $TiO_2$ coating layer obtained by both methods had a crystal structure of anatase, and the temperature of phase transformation into rutile was 90$0^{\circ}C$. The minimum crystal size of $TiO_2$ for the highest photocatalytic activity was found to be about 10nm.