• Korean Journal of Microbiology
• /
• v.43 no.2
• /
• pp.83-90
• /
• 2007

Sphingomonas sp. KS 301, which was isolated from oil contaminated soil, was shown to have five different SODs (SODI, II, III, IV, V) which can be separated by DEAE-Sepharose chromatography, and SOD III was finally purified in this study by ammonium sulfate precipitation, DEAE-Sepharose chromatography, Superose 12 gel filtration and Uno-Q1 ion exchange chromatography. The molecular weight of SOD III was 23 kDa as determined by SDS-PAGE and the apparent molecular weight of the native enzyme was estimated to be approximately 71 kDa by Superose-12 gel filtration chromatography. These data suggest that the purified SOD consists of at least two subunits. The specific activity of the SOD III was higher than Mn type or Fe type SOD of Escherichia coli by 5 fold. To determine the type of SOD III, inhibitory effects of $NaN_{3},\;H_{2}O_{2},\;KCN$ were examined. 10 mM $NaN_{3}$ was able to inhibit 56% of the SOD III activity, which indicates that this SOD is Mn type. The optimum pH of the SOD III was 7.0 and the optimum temperature was $20^{\circ}C$. N-terminal amino acid sequence of purified SOD III was most similar to those of Psudomonase ovalis and Vibrio cholerae among bacteria.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.568-574
• /
• 2020

Recently, the installation of energy storage systems (ESSs) that have a range of functions, such as power stabilization of renewable energy sources, demand control, and frequency regulation, has been increasing annually. On the other hand, since the fire accident of ESS occurred at Gochang Power Test Center in August 2017, 29 fire accidents with significant property losses have occurred, including the Gyeongsan substation and Kunsan PV power plant. Because these fire accidents of ESS are arisen regardless of the season and capacity of ESS, an analysis of the fault characteristics in ESS is required to confirm the causes of the fire accidents accurately and ensure the safety of the ESS. This paper proposes the modeling of ESS using PSCAD/EMTDC S/W to identify the fault characteristics and ensure the safety of the ESS. From the simulation results of fault characteristics based on various scenarios, it is clear that the insulation of ESS may be breakdown due to the largely occurring CMV (common mode voltage). Furthermore, the CMV between the PCS and battery can be reduced, and the insulation breakdown of ESS can be prevented if an SPD (surge protect device) is installed in the battery and PCS sides, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.5
• /
• pp.772-785
• /
• 1998

This study was undertaken to clarify the microstructure of the different IPS Empress ingots by etching and to observe the change of leucite crystal structure according to subsequent heat treatment and the crystal distribution according to sprue types(${\phi}2.8mm$, single sprue; ${\phi}1.8mm$, double sprue) by scanning electron microscopy. IPS Empress T1, O1 ingots used for staining technique, and Dentin(A2) ingots used for layering technique were selected for this study. To observe the microstructures of these ingots before pressing, the specimens were prepared in splinters($3{\times}3{\times}3mm$) taken from the original ingots. And to estimate crystal distribution and microstructural change by sprue type and subsequent heat treatment. the specimens($3{\times}3{\times}3mm$) were heat-pressed through the two types of sprues with different diameters and numbers, and all specimens were fired according to the recommended firing schedule. The observed surface was ground with waterproof papers($#800{\sim}#1800$) on the grind polisher and was cleaned ultrasonically. All specimen were etched with 0.5% hydrofluoric acid. After etching, the surface was treated by ion sputter coating for SEM observation at an accelerating voltage of 20kV. In all specimens, the central area of ground surface was observed because there was less difference in microstructure between the peripheral area and the central area. The results were as follows ; 1. In the microstructure according to the ingot type, there was a wide difference between the staining (T1,O1) and layering(Dentin A2) ingots, but there was not a considerable difference between the T1 ingot and the O1 ingot for staining technique. 2. In all specimens, the crystal dispersion of IPS Empress ceramic using double sprue was significantly more scattered than that of IPS Empress ceramic using single sprue. The degree of scattering was strongest in the Dentin(A2) specimen and weakest in the O1 ingot. 3. In the microstructural change according to the subsequent heat treatment, all of ingots had some microcracks in the inside of the leucite crystal and the glass matrix after pressing. The inner splinters of the leucite crystal became smaller, and more microcracks occurred in the glass matrix due to increasing heat treatment times. 4. The size of leucite crystals varied from $1{\mu}m\;to\;5{\mu}m$. The mean size of mature crystals was about $5{\mu}m$. The form of the crystal was similar to a circle when it was smaller and similar to an ellipse when it was larger.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.389-400
• /
• 2011

A high-performance liquid chromatographic (HPLC) method was developed to determine residues of phenothrin and silafluofen, known as synthetic pyrethroids, in agricultural commodities. Insecticide residues were extracted with acetone from representative samples of four crops which comprised rice, apple, pepper and cabbage. The extract was purified serially by liquid-liquid partition and Florisil column chromatography. For rice and pepper samples, acetonitrile/n-hexane partition was additionally adopted to remove nonpolar interferences. Reversed phase HPLC using an octadecylsilyl column was successfully applied to separate two phenothrin isomers and silafluofen from sample co-extractives. Intact parent compounds were sensitively detected by ultraviolet absorption at 226 nm. Recovery experiment at the quantitation limit validated that the proposed method could apparently determine phenothrin and silafluofen residues at 0.02 and 0.01 mg/kg, respectively. Mean recoveries of phenothrin and silafluofen from four crop samples fortified at three levels in triplicate were in the range of 82.4~109.8% and 83.7~109.8%, respectively. Relative standard deviations of the analytical method were all less than 10%, irrespective of crop types and spiking levels. A selected-ion monitoring (SIM) LC/mass spectrometry (MS) with electrospray ionization was provided to confirm the suspected residue of phenothrin, even though no sufficient ionization of silafluofen was obtained. Both phenothrin and silafluofen could be successfully confirmed by gas chromatography/MS SIM with electron impact at 70 eV. The proposed method is sensitive, repeatable and rapid enough to apply to officially routine inspection of agricultural products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1398-1406
• /
• 2004

To develop the new type of salt-fermented seafoods, the salt-fermented oysters in olive oil (product SO) were manufactured, and food components and quality characteristics of product SO were examined. The optimum processing condition for product SO is as follows. The raw oyster with no shell was washed off with 3% saline solution. Then dewatered, and dipped in the brine-salting solution made up with saturated saline solution and oyster sauce (2 : 1 v/v) mixture added 1% sodium erythorbic acid and 0.2% polyphosphate. After salt-fermentation it ripened by brine salting at 5$\pm$1$^{\circ}C$ for 15 days. Then dried at 15$^{\circ}C$ for 4 hours with cool-air, and packed in No. 3B hexahedron type can. Finally, poured with olive oil and seamed it by double-seamer. The moisture, crude protein, crude ash and volatile basic nitrogen contents of the product SO were 61.6%, 12.0%, 16.3% and 34.3 mg/100 g, respectively. In taste-active components of the product SO, total amount of free amino acids is 2,335.4 mg/100 g and it has increased by 50% overall during salt-fermentation 15 day. Taurine, glutamic acid, proline, glycine, alanine, $\beta$-alanine and lysine were detected as principal free amino acids. The contents of inorganic ions were rich in Na and K ion, while the amounts of nucleotide and its related compounds and other bases except betaine were small. From the results of this research, the product SO had a superior organoleptic qualities compared with conventional oyster product, and could be reserved in good conditions for storage 90 days at room temperature.

• Microbiology and Biotechnology Letters
• /
• v.34 no.2
• /
• pp.166-173
• /
• 2006

This research has been performed to clarify the relationship between hydrogeochemistry and bacterial community structure in groundwater contaminated with landfill leachate. We collected and analyzed samples from 5 sites such as leachate (KSG1-12), treated leachate (KSG1-16), two contaminated groundwaters (KSG1-07 and KSG1-08) and non-contaminated groundwater (KSG1-13). pH was 8.83, 8.04, 6.87, 6.87 and 6.53 in order; redox potential (Eh) 108, 202, 47, 200 and 154 mV; electric conductivity (EC) 3710, 894, 1223, 559 and 169.9 $\mu$S/cm; suspended solids (SS) 86.45, 13.74, 4.18, 0.24 and 11.91 mg/L. In KSG01-12, the ion concentrations were higher especially in $Cl^-$ and $HCO_3^-$ than other sites. The concentrations of Fe, Mn and $SO_4^{2-}$ were higher In KSG1-07 than in KSG1-08, and vise versa in $NO_3^{2-}$. In the comparison of DGGE fingerprint patterns, the similarity was highest between KSG1-13 and KSG1-16 (57.2%), probably due to common properties like low or none contaminant concentrations. Otherwise KSG1-08 showed lowest similarities with KSG1-13 (25.8%) and KSG1-12 (27.6%), maybe because of the degree of contamination. The most dominant bacterial species in each site were involved in $\alpha$-Proteobacteria (55.6%) in KSG1-12, $\gamma$-Proteobacteria (50.0%) in KSG1-16, $\beta$-Proteobacteria (66.7%) in KSG1-07, $\gamma$-Proteobacteria (54.5%) in KSG1-08 and $\beta$-Proteobacteria (36.4%) in KSG1-13. These results indicate that the microbial community structure might be changed according to the flow of leachate in grounderwater, implying changes in concentrations of pollutants, available electron accepters and/or other environmental conditions.

• Applied Biological Chemistry
• /
• v.15 no.2
• /
• pp.111-142
• /
• 1972

An experimental Chung-Kook-Jang was prepared using the strain Bacillus subtilis sp. isolated by the author Samples were taken in 12 hrs interval during the fermentation and the oligopeptides were separated by the method of molecular sieving using the ion exchange resin column of Dowex-50. Only the X-16 fraction of oligopeptides was taken and the components of oligopeptides were developed in two dimensional thin layer chromatograms. The each peptide spot was eluted and each peptide was isolated. The pattern and kinds of amino acids, and N and C-terminal amino acids were studied. Fourteen different oligopeptides could be detected by the two dimensional thin layer chromatography, all of which were consisted of $4{\sim}9$ kinds of amino acids. No dipeptides and no tripeptides could be found. The N and C-terminal amino acids and the residual component amino acids of all these 14 peptides could be summarized as the follows. [P]-I. Pro (Cys Ala Asp Trp Ile Val) Glu [P]-II. Val (His Arg Glu Thr Ala Met) Asp [P]-III. Glu (Cys Lys Asp Thr Met) Ala [P]-IV. Glu(His Ser Ala) Met) [P]-V. Ile (Cys Asp Arg Gly Pro T.p Phe) His [P]-VI. Gly(Asp ser) Lys [P]-VII. Thr(Pro Tyr Phe) Asp [P]-VIII. Phe(Tyr Leu Ile) Val [P]-IX. Trp (Phelle) Thr [P]-X. Ile (Arg Leu) Phe [P]-XI. Asp (Lys His Ser Gly Glu Pro) Ala [P]-XII. Glu (Cys Asp Gly) Ser [P]-XIII. Ala (Arg Tyr) Glu [P]-XIV. Met (Glu Ala) His It appears that the protease of the Bacillus subtilis K-27 syrain has rather wider range of specificity than proteases of Aspergoillus soya, pepsin, chymotrypsin, and trypsin.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Herbal Formula Science
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2023

Objectives : The main aim of this study was to examine the LC-MS/MS used to identify phenolic compounds of CRE(Coptidis Rhizoma 70% EtOH Extract). Also, we investigated antioxidative activities and Anti-inflammatory activities. Methods : LC-MS/MS Analysis HPLC and LC-MS/MS were performed on a 1260 series HPLC system (Agilent Technologies, Inc., California, USA) and 3200 QTrap tandem mass system (Sciex LLC) operated in positive ion mode (spray voltage set at -4.5 kV). The solvent used was DW and Acetonitrile containing 0.1% formic acid, a gradient system was used at a flow rate of 0.5 mL/min for analysis, and a Prontosil C18 column (length, 250 mm; inner diameter, 4.6 mm; particle size, 5 ㎛; Phenomenex Co., Ltd., California, USA, Biochoff Chromatography) was used. The solvent conditions used in the mobile phases were 0-10 min at 10-15% B, 10-20 min at 20% B, 20-30 min at 25%, 30-40 min at 40%, 40-50 min at 70%, 50-60 min at 95%, and 60-70 min at 95%. The analysis was performed at a wavelength of 284 nm and a temperature of 35℃. The cell viability was measured using a 3-(4,5-dimethyethiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity. We examined the effects of CRE on the lipopolysaccharide (LPS)-induced production of nitric oxide (NO) in a RAW 264.7 cells Results : The chemical analysis CRE by Liquid chromatography-tandem mass spectrometry (LC-MS/MS) confirmed that Rosmarinic acid, Ferrulic acid, 3-O-feruloylquinic acid, and 5-O-feruloylquinic acid as phenolic components. DPPH radical scavenging activity was the inhibitory activity of CRE showed at 200 ㎍/mL a statistically significant level. MTT assay demonstrated that the CRE did not have a cytotoxic effect in RAW 264.7 and LPS-induced RAW264.7 cells. Also, CRE reduced NO production in RAW 264.7 cells stimulated with LPS. Conclusions : Based on these findings, The chemical analysis 4 major components CRE such as Rosmarinic acid, Ferrulic acid, 3-O-feruloylquinic acid, and 5-O-feruloylquinic acid. Moreover, we confirmed that CRE has effects antioxidant and anti-inflammatory. The results demonstrate that CRE can be used as an antioxidant and a powerful chemopreventive ingredient against inflammatory diseases.

• Journal of Life Science
• /
• v.19 no.9
• /
• pp.1218-1225
• /
• 2009

Difractose anhydrides (DFAs) is studied as a sweetener for diabetics because of its structural property. DFAs have four types: DFA I, III, IV (degradation of levan) and V (degradation of inulin). Especially, DFA IV has been shown to enhance the absorption of calcium in experiments using rats. Levan fructotransferase is an enzyme for producing di-d-fructose-2,6':6,2-dianhydride (DFA IV). To identify structural characterization, we purified wild-type and mutants (D63A, D195N and N85S) of levan fructotransferase (LFTase) from Microbacterium sp. AL-210. These proteins were purified to apparent homogeneity by Ni-NTA affinity column, Q-sepharose ion exchange and gel filtration chromatography and detected by SDS-PAGE. They were also analyzed by circular dichroism (CD) measurements, JNET secondary structure prediction, activity measurements at various temperatures, and pH analysis. The optimum pH for the enzyme-catalyzed reaction was pH 7.5 and optimum temperature was observed at $55^{\circ}C$. Along with wild-type LFTase, mutants were analyzed by CD measurement, fluorescence analysis and differential scanning calorimetry (DSC). N85S showed less $\alpha$-helix and more $\beta$ strand than others. Also, N85S showed almost the same curve as wild-type in their steady-state fluorescence spectra, whereas mutant D63A and D195N showed higher intensity than wild-type. The amino acid sequence of wild-type LFTase was compared to the sequences of exo-inulinase from Aspergillus awamori, a plant fructan 1-exohydrolase from Cichorium intybus, and Thermotogo maritime (Tm) invertase and showed a high identity with Exo-inulinase from Aspergillus awamori.