• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.349-350
• /
• 2009

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_1
• /
• pp.149-161
• /
• 2020

We describe a new approach to implement of trajectory control and track record of articulated manipulator based on monitoring simulator for smart factory. The learning control algorithm was applied in implementation real-time control to provide enhanced motion control performance for robotic manipulators. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, or values of manipulator parameters and payload. Performance of the proposed controller is illustrated by simulation and experimental results for robot manipulator consisting of six joints at the joint space and Cartesian space.by monitoring simulator.

• 연구논문집
• /
• s.27
• /
• pp.35-45
• /
• 1997

The dynamic design process for the articulated bogie of light rail vehicle(LRV) was studied to design a primary and secondary suspension elements. Suspension stiffness and damping is selected on the basis of the ride quality and suspension stroke trade-off. LRV was modeled as a 2 d.o.f linear system for the design of vertical suspension characteristics and a 4 d.o.f linear system for the design of lateral suspension characteristics. FRA's class-4-track irregularity was used for the exciting disturbance on track. The optimum value of primary and secondary suspension characteristics was determined using this design process.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.414-421
• /
• 1999

In this paper, the simplified method for 2-dimensional train/track/bridge interaction analysis is utilized in the analysis of dynamic behavior of bridges in which the eccentricity of axle loads and the effect of the toriosnal forces acting on the bridge are included for the more accurate train/track/bridge interaction analysis. Inverstigations mainly into the influence of vehicle speed on train/track/bridge interactions are carried out for the two cases. The first case is that only train and bridge are considered in the modelling and the other case is that train, track and bridge are considered.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.336-341
• /
• 2014

The articulated structures seen in train or tram applications are being applied in road transportation systems, for use in mass passenger transit. When articulated vehicles are driven on public roads, they no longer follow a guided track. Therefore, there are a lot of control elements that need to be considered, such as turning radius, swept path width, off-tracking, and swing-out. Some of the currently available articulated vehicles on roads are equipped with an independent drive system; a system that has one motor at each wheel. Through this drive system, each wheel can be independently controlled, making precise and quick dynamic stability control possible. In this paper, we propose a torque distribution algorithm that can reduce the overall turning radius of the articulated vehicle, which has been verified through dynamic simulation.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.159-166
• /
• 1999

In this paper, running performance analyses of an articulated light rail vehicle are carried out using VAMPIRE software package. The stability analysis to determine the critical speed and the safety analysis such as derailment coefficients, lateral forces of wheels and reduction of wheel load are carried for the track conditions of straight, transition and curving range to the operating velocity of 40km/h. Also, ride quality is analyzed. As the results of analysis, the safety of light rail vehicle satisfied with the limit values and the ride quality for tare and full load condition was shown to the "not uncomfortable" level in ISO 2631-1 (1997) criteria.

• Journal of Biosystems Engineering
• /
• v.21 no.1
• /
• pp.34-43
• /
• 1996

The present pesticide application technology widely used with a power sprayer in Korea is assessed as the problem awaiting solution in the point of view of its ineffectiveness, inefficiency, and environmental contamination. As one approach to get rid of these problems, the boom spraying with ultra-low volume and precision application technology has been recommended. The study was undertaken to investigate plants damages incurred by the self-propelled boom-sprayer vehicle, to develop the design criteria of vehicle wheel, and to compare plant damages caused by the front wheel steering vehicle, the 4-wheel drive vehicle and the articulated vehicle, by the computer simulation. The experiment showed that the amount of damaged plants incurred by the self-propelled boom sprayer were about 0.29% in average in the field size of 100m$\times$50m(0.5ha), about 60~80% of which recovering while growing. The recommandable wheel size was analyzed to be 70~100cm in diameter, 8~15cm in width from the vehicle-plant-soil relationship. The simulation on damaged plants anticipated to be incurred by various steering vehicles showed that the smaller the turning radius, the lesser the damaged plants within its range of 3~5m. Average plant damage rate by the front wheel steering vehicle, the 4-wheel drive vehicle and articulated vehicle was relatively assessed to be 2 : 1.8 : 1.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.540-547
• /
• 1998

light rail vehicle is modeled as a 2 d. o. f linear system for the design of vertical suspension characteristics and a 4 d. o. f. linear system for the design of lateral suspension characteristics. FRA's class-5-track irregularity is used for the exciting disturbance on track. Suspension stiffness and damping is selected on the basis of the ride quality and suspension stroke trade-off for the bogie of light rail vehicle. The optimum value of primary and secondary suspension characteristics is determined. And the stability of full vehicle model for the LRV is analyzed using the VAMPIRE program and critical speed is determined.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_1
• /
• pp.889-896
• /
• 2020

We describe a new approach to the analyze the control performance of robotic manipulator based on the monitoring system. The structure of monitoring simulator is consist of seven modes such as control state mode, coordinate mode, input/output mode, program mode, parameters mode, and track mode. The applied control algorithme consists of an time varying feed-forward and feedback controller. The proposed scheme is simple in structure, fast in computation, and suitable for real-time implimemtation. Moreover, this scheme does not require any accurate dynamic modeling and values of parameters. Performance of the proposed monitoring system is illustrated by simulation and experiment for robot manipulator with six degrees of freedom.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.114-120
• /
• 2007

This paper introduces a mobile robotic system being developed for urban search and rescue. In order to search human victims in narrow spaces, we developed two types of serially linked mobile robots, named KAEROT-Centipede and KAEROT-SnakeTV1, that can climb over large vertical steps or travel inside narrow vertical pipes. To send such mobile robots to the disaster areas coping with large obstacles, we also developed a assistant mobile robot, named KAEROT-QuadTrack, that has 4 articulated track modules. This paper describes the mechanical structure and control architecture of the serially linked mobile robots and the supporting configuration for torque reduction of the assistant mobile robot during spinning motion that usually requires large driving torque. The experimental results show that such robotic systems have good mobility over the various terrains in disaster areas.