• Steel and Composite Structures
• /
• 제6권3호
• /
• pp.183-202
• /
• 2006

The behavior of steel-concrete composite beams is strongly influenced by the type of shear connection between the steel beam and the concrete slab. For accurate analytical predictions, the structural model must account for the interlayer slip between these two components. This paper focuses on a procedure for response sensitivity analysis using state-of-the-art finite elements for composite beams with deformable shear connection. Monotonic and cyclic loading cases are considered. Realistic cyclic uniaxial constitutive laws are adopted for the steel and concrete materials as well as for the shear connection. The finite element response sensitivity analysis is performed according to the Direct Differentiation Method (DDM); its analytical derivation and computer implementation are validated through Forward Finite Difference (FFD) analysis. Sensitivity analysis results are used to gain insight into the effect and relative importance of the various material parameters in regards to the nonlinear monotonic and cyclic response of continuous composite beams, which are commonly used in bridge construction.

• 태양에너지
• /
• 제7권1호
• /
• pp.61-74
• /
• 1987

This review evaluates the state of art in the field of high-temperature energy storage materials and systems. The physical and chemical properties, corrosion data and practical applications of the phase change materials, especially the inorganic salts applicable to storage temperature in the range of $100-850^{\circ}C$ have been summarized. Fluoride salts have excellent thermal storage properties, but these are less attractive in terms of cost and corrosion problem of container materials. The nitrate and nitrite have attractive properties in the temperature range up to $600^{\circ}C$, at which the rate of decomposition becomes unacceptable. Carbonates euteutic salts can be considered as the most promising energy storage material on the basis of their low cost and excellent material compatibility for corrosion in the temperature range up to $850^{\circ}C$.

• 보존과학회지
• /
• 제35권1호
• /
• pp.1-10
• /
• 2019

This study provides a comprehensive evaluation of general characteristics of sized silk fabrics for the painting purpose. Two particular types of silk fabrics used for painting background were compared: a recreation of historical material and a mass produced material of present day. The sizing process made the surface characteristics of the silk fabrics more suitable for painting. The dyeing properties of the fabrics were related to the surface area of the fabrics, and had no significant effect on their mechanical properties. The antibacterial activity of the tannin-based natural dyestuffs were maintained after the sizing. The performance assessment by the KES-FB system showed that the fabrics are more prone to deteriorate after the sizing because the glue layer receives the most of the physical stresses.

• 복식
• /
• 제56권7호
• /
• pp.105-120
• /
• 2006

Today's radical change of environment and technology spreaded high-technology art by cutting across a general idea of art, expressed machine aesthetic in fashion style by influencing materials and production processes of fashion. The purpose of this research is to take another look at the value and the importance of ornaments in terms of fashion design, to overcome the negative aspect of Technology Fashion by designing Retro Technology Fashion that harmonizes reason with sensibilities through floral patterns. The results of this study are as followings. 1. If Retro technology Fashion was analyzed by time and space element that are postmodernism techniques, there are Ethnic Technology Fashion that are based on space and historical Technology Fashion that are based on time. In terms of spare element, there is the hybrid of revival of exotic folklore with Technology fashion. In terms of time element, there is the hybrid of costumes of before 20th Century with Technology Fashion. It means unifying detail or silhouette of costumes of ancient time to modern time wit Technology Fashion. For another time element, the hybrid of retro fashion after 20th Century with Technology Fashion. The retro nostalgia is revived by the floral patterns or silhouette of Hippie fashion unified with Technology Fashion. 2. Based on above research, Retro Technology Fashion with floral pattern on CAD were designed. As the results, for Ethno Fashion that is spatial retro, 'Asian Technology fashion' was designed with bright colors, China collar that are oriental, and vinyl material. For historical Technology fashion that are based on time, 'Space Middle Age' was designed with tight silhouette, party colored pants and plastic material.

• 환경위생공학
• /
• 제22권4호
• /
• pp.105-117
• /
• 2007

The research was conducted based on the 1012 cases questionnaire for the purpose of to evaluate the change effect of university student's consciousness and behavior before and after lecture on environmental problems. And this questionnaires were performed with self-administered by the university student who made a application for liberal arts related to environmental subjects. The results were as follows. According to the analysis results the most students responded that the most serious problem of environmental pollution before the lecture on environmental education was a genetic modified organism(3.64/4.00), but the most serious problem of environmental pollution was changed to the topic of water pollution(3.96/4.00) after the lecture on environmental problem. And also according to the analysis results dributed by gender were that boy students show a higher concerning(170%) than that of girl students(150%). The most good results obtained after lecture on environmental problem were water pollution(23.0%), air pollution(11.5%), waste material pollution(10.9%), food additives (10.0%), genetic modified organism(8.0%), endocrine disrupter(7.5%), respectively. And according to the analysis results distributed by a grade were that the concerning of a low grade(freshman, sophomore)were higher than that of a high grade(junior, senior) in the topic of water pollution, air pollution, waste material pollution. But there were high level of awareness on the topic of food additives, genetic modified organism, endocrine disrupter to the all students(freshman to senior). And according to the analysis results distributed by a major field of study were that students who major in art & athletics, liberal art and etc(public health) were show a deep concerning than that of science & engineering. Finally, the environmental education during the university class were effectively contribute to increase the awareness of the seriousness of environmental pollution problem(8.2%) and also contribute to the practical life after class also increase their consciousness of environmental problem(59.8%).

• 트랜스-
• /
• 제7권
• /
• pp.1-17
• /
• 2019

본 연구는 새로운 커뮤니케이션 미디어의 사회적 파급효과와 영향력이 매우 크다는 것을 인식하고'인터뷰'를 소재로 한 무용과 미디어의 접목을 시도한 현대무용작품들이 독자적인 방식으로 무용예술의 가치를 담아낼 수 있다는 가전제하에서 출발하고자 한다. 현재 많은 예술단체들과 안무가들은 관객에게 효과적으로 다가가기 위해 점진적으로 새로운 안무기법과 형식에 대해 깊이 고민하며 관객들의 관념을 일깨우고 있다. 이러한 변화는 기술 진전에 따른 다변화를 이끌어내고 21세기의 산업화와 무용관객을 개발해 무대를 확장시키고 무용예술을 향유할 콘텐츠로써 그 의미와 가치가 있다고 할 수 있겠다. 따라서 인터뷰를 활용한 국·내외 무용작품들을 문헌과 영상을 통해 분석하고 결론적으로 무용작품에서 인터뷰라는 소재가 어떠한 안무방식으로 활용되고 있는가를 살펴보고 그 효과성을 제시하는 탐구적 연구가 될 것이다.

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.389-393
• /
• 2008

The purpose of this study is to provide beauticians with the fundamental material for them to use effectively heat permanent wave and satisfy their customers. It carried out an experiment with hair of a woman in her late twenties to investigate the change of physical and morphologic characteristics by its water content when performing heat permanent wave. It evaluated the water content as 0g, 1g, 2g, 3g and 4g respectively when performing the heat permanent wave on hair, then it compared and observed the wave type, tensile strength and elongation for its physical change also observed the morphologic change by scanning electronic microscope and transmission electronic microscope. The result of experiment on the physical specificity revealed that the wave was the most ideal when the water content was 2 g. The material with much water content made wave but the result was not satisfied. In the case of hair with water content of nearly 0g didn't make wave. In terms of tensile strength and elongation, the tensile strength was generally reduced as hair was damaged, on the contrary, the elongation was increased. It observed the change of morphologic characteristic and got the result that the damage on hair cuticle was deepen as its water content was decreased. It also showed the result that damage happened on hair cuticle more than hair cortex with the observation of fine structure on hair section by transmission electronic microscope. Generally chemical treatment damaged hair. Under consideration of this aspect, the ultimate goal of this thesis is to minimize the damage of hair caused by chemical treatment and get the satisfaction on the hair style. The result of experiment presented that the hair showed the best result when its water content was 2 g.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.339-364
• /
• 2010

Following a joint OECD/NEA-IAEA-sponsored meeting to define the current role and future perspectives of the application of Computational Fluid Dynamics (CFD) to nuclear reactor safety problems, three Writing Groups were created, under the auspices of the NEA working group WGAMA, to produce state-of-the-art reports on different aspects of the subject. The work of the second group, WG2, was to document the existing assessment databases for CFD simulation in the context of Nuclear Reactor Safety (NRS) analysis, to gain a measure of the degree of quality and trust in CFD as a numerical analysis tool, and to take initiatives to extend the existing databases. The group worked over the period of 2003-2007 and produced a final state-of-the-art report. The present paper summarises the material gathered during the study, illustrating the points with a few highlights. A total of 22 safety issues were identified for which the application of CFD was considered to potentially bring real benefits in terms of better understanding and increased safety. A list of the existing databases was drawn up and synthesised, both from the nuclear area and from other parallel, non-nuclear, industrial activities. The gaps in the technology base were also identified and discussed. In order to initiate new ways of bringing experimentalists and numerical analysts together, an international workshop -- CFD4NRS (the first in a series) -- was organised, a new blind benchmark activity was set up based on turbulent mixing in T-junctions, and a Wiki-type web portal was created to offer online access to the material put together by the group giving the reader the opportunity to update and extend the contents to keep the information source topical and dynamic.

• 융합정보논문지
• /
• 제12권5호
• /
• pp.290-297
• /
• 2022

본 연구에서는 단삼 뿌리 추출물의 세포 안정성, 수렴 활성, NO 소거능, iNOS 단백질 발현량, 염증성 cytokine 분비, elastase 효소 저해능, type I pro-collagen 합성능 등을 조사하여 기능성 화장품 소재로서의 가능성을 평가하고자 하였다. 단삼 80% 에탄올추출물(SE)과 열수추출물(SW)을 대상으로 NHDF 및 RAW264.7 세포에서 0.05~0.5 mg/mL 농도 처리에 따른 독성을 보이지 않아 수렴, 염증, 주름 개선 효능을 진행하였다. 그 결과 수렴활성 측정 결과 SE는 10 mg/mL에서 74.6%의 활성을 나타냈다. SE는 농도 의존적으로 LPS에 의해 유도된 NO, iNOS 단백질, TNF-α 및 IL-6 cytokine의 생성을 유의미하게 감소시켰다. 게다가 SE와 SW는 elastase 효소 활성을 억제할 뿐만 아니라 TNF-α에 의해 감소된 pro-collagen의 생성을 증가시켰다. 따라서 단삼 에탄올추출물은 수렴제, 염증 관련 피부 질환, 주름 생성을 효과적으로 예방할 수 있는 천연 화장품 소재로서의 활용 가능성이 높을 것으로 기대된다.

• 한국의상디자인학회지
• /
• 제20권4호
• /
• pp.163-174
• /
• 2018

Consumer and property evaluation of wetsuit materials were conducted to obtain useful data for developing competitive products that meet consumer expectations and improving industrial competitiveness. Data were collected through online surveys of 213 domestic consumers who have experienced wearing wetsuit among marine leisure activities. Five types of commercial wet suit materials by brand and four types of commercial wet suit materials with the same quality by thickness were collected. Then, their physical properties, salt water resistance and thermal insulation rate were evaluated and compared. As a result, the most commonly used wetsuit material is 3 to 5 mm thick, and the basic jersey material is bonded on both sides. As a processing for imparting functionality, processing for improving warmth and reducing surface resistance are most frequently used. Consumers often feel uncomfortable when wearing a wetsuit, such as wearing comfort, weight, ease of movement, stretchability, and clothing pressure, which are different from those of casual wear. Also, mechanical strength and warmth were considered to be the most important criteria for selection of wetsuit material for purchase or rental. The mechanical properties of brand A and B were better than those of brand C, D, and E. Resilience and thermal shrinkage were better in brand C, D, and E. On the other hand, there was no significant difference in the physical properties due to the difference in thickness of the material at the same quality. Also, it was found that the thicker the material, the more stable it is in the heat. Brand A and B had superior salt water resistance than brand C, D, and E. In the thermal insulation test, brand A and B showed better insulation characteristics than brand C, D, and E, but the types of bonded fabric and surface finishing of materials were thought to have affected. In comparison of the thickness, the thicker the materials, the better the salt resistance and the thermal insulation.