• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2016.09a
• /
• pp.41-43
• /
• 2016

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.344-356
• /
• 1999

A new and relatively simple equation for the soil water content-pressure head curve, ${\theta}$(h) is described in this paper. The particular form of the equation enables one to derive closed-form analytical expressions for the relative hydraulic conductivity, Kr, when substituted in the predictive conductivity models of Y. Mualem. Hopmans' equation is presented as an experimental method. The experienced method, $ET_a=K_sK_cET_o$ is introduced to estimate the actual evapotranspiration, $ET_a$(or $ET_c$). Using $ET_c$ and coil water data measured automatically in a weighing lusimeter, $K_s$ and $K_c$ values are estimated. Recently, FAO has introduced calculation procedures for the soil water(stress) coefficient, Ks in "Guidelines for computing crop water requirements".

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.2
• /
• pp.161-167
• /
• 1997

This study compares the subtypes of central beta adrenergic receptors (ARs) of brains of untreated rats with those of imipramine-treated rats. Beta adrenergic receptors were measured by quantitative autoradiography of the binding of $^3H$-dihydroalprenolol ($^3H$-DHA) in coronal sections of rat brain. Repeated treatment of rats with imipramine significantly reduced the binding of $^3H$-DHA to beta-1 AR in many brain areas, especially throughout the cerebral cortex, hippocampus, thalamus, and amygdala. Significant reductions of the binding of $^3H$-DHA to beta-2 AR were not found in any area of the brain. These data suggests that a selective down-regulation of beta-1 AR may be involved in the adaptive changes occurring after prolonged imipramine treatment.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.214-218
• /
• 1998

This study was performed to stabilize the physical properties of Sodium Carbonate Decahydrate that was selected as a highly concentrative thermal energy storage medium. The addition of ARS(additives to prevent supercooling) showed to prevent the supercooling of Na$_{2}$CO$_{3}$.10H$_{2}$O, and the supercooling was decreased below $1.5^{\circ}C$ with ARS of 3 wt% and the addition of PSC(phase separation controller) of 1.5 wt% controlled the phase separation of Na$_{2}$CO$_{3}$ .10H$_{2}$O with the phase change cycles increased from 0 to 1,500, the phase change temperature and the latent heat has changed in the range of 30$\pm$1.$0^{\circ}C$ and 54$\pm$2.0Kcal.kg$^{-1}$ respectively.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.15-22
• /
• 2011

An experimental variable rate nursery sprayer was developed to adjust application rates for canopy volume in real time. The sprayer consisted of two vertical booms integrated with ultrasonic sensors, and variable rate nozzles coupled with pulse width modulation (PMW) based solenoid valves. A custom-designed microcontroller instructed the sensors to detect canopy size and occurrence and then controlled nozzles to achieve variable application rates. A spray delivery system, which consisted of diaphragm pump, pressure regulator and 4-cycle gasoline engine, offered the spray discharge function. Spray delay time, time adjustment in spray trigger for the leading distance of the sensor, was measured with a high-speed camera, and it was from 50 to 140 ms earlier than the desired time (398 ms) at 3.2 km/h under indoor conditions. Consequently, the sprayer triggered 4.5 to 12.5 cm prior to detected targets. Duty cycles of the sprayer were from 20 to 34 ms for senor-to-canopy (STC) distance from 0.30 to 0.76 m. Outdoor test confirmed that the nozzles were triggered from 290 to 380 ms after detecting tree canopy at 3.2 km/h. The spray rate of the new sprayer was 58.4 to 85.2% of the constant application rate (935 L/ha). Spray coverage was collected at four areas of evergreen canopy by water sensitive papers (WSP), and ranged from 1.9 to 41.1% and 1.8 to 34.7% for variable and constant rate applications, respectively. One WSP area had significant (P < 0.05) difference in mean spray coverage between two application conditions.

• Analytical Science and Technology
• /
• v.5 no.3
• /
• pp.249-261
• /
• 1992

Electrochemical behavior of the heavy lanthanide complexes of alizarin red S(ARS) has been investigated by d. c. polarography, differential pulse polarography and cyclic voltammetry. The reduction mechanism at a mercury electrode of alizarin red S as a complexing ligand showed a one step of two-electron transfer and the electron process is found to be reversible. Alizarin red S forms a 3:1 adsorptive complexes with lanthanides and the complexes are reduced via one step of two-elctron. The reduction potential of complex wave($P_2$) shifted more negatively than the ligand wave($P_1$). The linear calibration curves of the decreacing $P_1$ and increasing $P_2$ is obtained when the lanthanide concentration varies from $2.0{\times}10^{-6}M$ to $6.4{\times}10^{-5}M$ under the condition of pH 9.5, 0.1M LiCl and $1{\times}10^{-3}M$ ARS.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.329-334
• /
• 1993

The formation of Mo(VI)-alizarin red S chelate ion its extraction into an organic solvent by ion-pairing for the separarive determination of trace Mo(VI) in natural water was applied in seawater samples. Removed Fe(III) and Zn(II), and Cu(II) by precipitating with anthranilic acid at pH 4.0 and 2.0, seawater 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 1.0mL to the water sample of pH 4.6, 0.6% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to form the ion-pair between Mo(VI)-ARS and aliquat-336 perfectly. The solution was stood for about 30 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520nm. The content of Mo(VI) was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized and the interferences and release of concomitant ions was also studied. This procedure was applied to the analysis of Eastern and Yellow seawaters. It could be confirmed from the recoveries of over 85% in samples spiked with a given amount of Mo(VI) that this method was also quantitative in the determination of trace Mo(VI) in a seawater.

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.283-285
• /
• 2000

Two field tests were conducted in 1995 to examine the effects of composts and soil amendments on physicochemical properties of soil in relation to Phytophthora root and crown rot of bell pepper. Chitosan, crab shell waste, humate, sewage sludge-yard trimmings, and wood chips were applied to test plots, some of which affected the levels of P, K, Mg, pH, and H. Physicochemical properties were not related with disease incidence, but percent organic matter, estimated nitrogen release, K, and Mg were correlated with total microbial activity. The elements K and Mg were especially responsible for the increased soil microbial activity that could affect development of root and crown rot of pepper.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.289-296
• /
• 1993

The formation of Mo(VI)-alizarin red S chelate ion and its extraction into an organic solvent by ion-pairing were studied for the separative determination of trace Mo(VI) in natural water samples. Natural water 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 0.5mL to the water sample of pH 4.0, 0.2% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to from the ion-pair between Mo(VI)-ARS and aliquat-336, completely. The solution was stood for about 90 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520 nm. The content of Mo(VI) in sample was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized. This procedure was applied to the analysis of river and tap waters. It could be confirmed from the recoveries of over 99% in samples spiked with a given amount of Mo(VI) that this method was quantitiative in the determination of trace Mo(VI) in a natural water.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1616-1621
• /
• 2007

Off-flavors and odors in fermented cucumbers result from the growth of undesirable microorganisms during the secondary fermentation. Under laboratory conditions using a sterile fermented cucumber slurry medium, the spoilage fermentations were reproduced. Using this system the salt and pH conditions that allow the spoilage to occur were determined by varying the NaCl concentration and pH of the slurry medium. At pH 3, no spoilage was observed, regardless of the salt concentration, while at pH 3.5, pH 4, and pH 4.5, spoilage occurred in the 0 and 2% NaCl samples. For pH 5.0 samples, spoilage products were seen for all NaCl treatments. Based on these results the Preservation Prediction Chart was developed. The Chart may be used for selection of proper pH value and salt concentration for long term storage of fermented cucumber.