• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.311-311
• /
• 2009

Carbon nanotubes (CNTs) belong to an ideal material for field emitters because of their superior electrical, mechanical, and chemical properties together with unique geometric features. Several applications of CNTs to field emitters have been demonstrated in electron emission devices such as field emission display (FED), backlight unit (BLU), X-ray source, etc. In this study, we fabricated a CNT cathode by using filtration processes. First, an aqueous CNT solution was prepared by ultrasonically dispersing purified single-walled CNTs (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). The aqueous CNT solution in a milliliter or even several tens of micro-litters was filtered by an alumina membrane through the vacuum filtration, and an ultra-thin CNT film was formed onto the alumina membrane. Thereafter, the alumina membrane was solvated by acetone, and the floating CNT film was easily transferred to indium-tin-oxide (ITO) glass substrate in an area defined as 1 cm with a film mask. The CNT film was subjected to an activation process with an adhesive roller, erecting the CNTs up to serve as electron emitters. In order to measure their luminance characteristics, an ITO-coated glass substrate having phosphor was employed as an anode plate. Our field emitter array (FEA) was fairly transparent unlike conventional FEAs, which enabled light to emit not only through the anode frontside but also through the cathode backside, where luminace on the cathode backside was higher than that on the anode frontside. Futhermore, we added a reflecting metal layer to cathode or anode side to enhance the luminance of light passing through the other side. In one case, the metal layer was formed onto the bottom face of the cathode substrate and reflected the light back so that light passed only through the anode substrate. In the other case, the reflecting layer coated on the anode substrate made all light go only through the cathode substrate. Among the two cases, the latter showed higher luminance than the former. This study will discuss the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the either side.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.465-471
• /
• 2005

A method of calculation fur propagating and focusing of focused beams generated in antenna arrays, using BPM(Beam Propagation Method), is presented in this paper. Based on the diffraction theory, the beam focusing and Propagation is studied specially for the case of the antenna way fed by the Rotman lens that is able to focus microwave power on its focal arc or generate multiple beams. There are difficulties in performing a full-wave simulation using a commercial EM simulation tool for propagating and focusing of beams because of the structural complexity and the feeding assignment of the antenna array. Therefore, as an alternative solution, the BPM is presented to calculate the beam propagation from the aperture-type antennas. From the point of view of optics, the propagations of the lens have been simplified from the Fresnel diffraction integral to the Fourier transform. Using Fourier Transform, a beam propagation method is developed to show improvement of the resolution by controlling the wavefront of wave Propagating from an aperture-type antenna array. The beam width(or spot size) and the intensity are calculated for a focused beam propagating from an array having $10\lambda$ of its size. For the beams with $20\lambda,\;30\lambda$, and $50\lambda$ of geometrical focal length, the half-power beam widths(or spot size) are about 1.1\lambda,\;1.3\lambda,\;and\;1.9\lambda$ respectively.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.215-224
• /
• 2005

With the recent increase of sensitivity to decors, there has been an ever-increasing significance of exhibiting the beauty of the outer looks of an article. This trend has necessarily led to the diversification and also specialization of the color scheme activities. And so, it is inevitable that we should form the substantial ideas of the color scheme and further on, enhance the efficacy of its orientation under the prevailing circumstances. Now, we come to a realization that we must first take a glance at the whole picture of the arrays of color embedded in a variety of articles in the sixties and seventies of the 20th century, a bold introduction of color designs, thereby tracing the birth of color designs and finding a meaning in its mechanism. This study begins with the obtaining of a large collection of articles in those days, along with the literature on the commercial effects color suggest, and looking into the background of their trend and finding a meaning that underlies what these colors suggest. The general idea of those color designs exemplifies that the color selection was none other than the simplicity and convenience in the making of things in doser relation to the easy selling. With the advance of material quality and enhancement of the industrial idealism, it has been proved that color plays an important role in depicting the image of quality and tastes of class. In that role color has been given the indicator of visual delights and differentials in quality articles. All this has been reflected in a diversity of articles: for instance, white for household appliances, prime color for living necessaries and natural color for the decore like furniture. Formerly, after all, people used to have little regard for color. What is color for, it was thought, in relation to the selling image of articles? That is wily our preceding generation pays attention only to the first-hand looks of articles, neglecting the intensive study on color. We are beginning to understand what image a certain color scheme evokes in our feeling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.81-88
• /
• 2003

For driver's convenience, the ACC(Adaptive Cruise Control) requires a system which determines the direction of vehicles and controls the vehicle to keep the distance among the automobiles constant. This paper describes the microstrip array antennas designed to operate at 24 GHz, and used as a direction indicator of moving vehicles. 8${\times}$2 transmit array antenna with wide beamwidth, 8${\times}$4 receive center array antenna, and two 8${\times}$8 receive array antennas with narrow beamwidth were designed and fabricated. Measurement results for the arrays showed that the azimuthal beamwidth is 50$^{\circ}$and the gain is 16.7 dBi for the transmit array antenna. For the receive array antenna, the center, the left, and the right array antenna have beamwidths of 20$^{\circ}$, 13$^{\circ}$, 13$^{\circ}$respectively, and have gains of more than 20 dBi. The left and right array antenna have the beam tilt angle of ${\pm}$18$^{\circ}$. The measured radiation patterns showed a good agreement with the simulated patterns, and the designed array antennas are suitable fur detecting 3 directions of the vehicle within the scan angle area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.648-658
• /
• 2006

We propose a thin frequency selective surface(FSS) superstrate etched on a substrate for dual-band directivity enhancement, and present a design method of the superstrate. In the proposed new design, two FSS arrays with the same periodicity, but with different alignments are placed above and below a thin dielectric layer to overcome the problem of conventional superstrates for dual band directivity enhancements. Based on the unit-cell simulation, several important parameters that characterize the thin FSS superstrate are investigated, and the procedure for designing such a superstrate is described. We compare the resonant frequencies and the qualify factors of the unit cell with those of three FSS antenna composites with different quality factors, and identify the quality factors which support similar directivity enhancement at the dual-band directivity enhancement. It was found that there is an optimum FSS array size of a superstrate to enhance the directivity most efficiently. Measured results for a fabricated superstrate show a good agreement with the simulated ones.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.145-155
• /
• 2013

In this paper, we proposed a $4{\times}4$ block parallel architecture of interpolation for high-performance H.264/AVC Fractional Motion Estimation in 8K UHD($7680{\times}4320$) video real time processing. To improve throughput, we design $4{\times}4$ block parallel interpolation. For supplying the $10{\times}10$ reference data for interpolation, we design 2D cache buffer which consists of the $10{\times}10$ memory arrays. We minimize redundant storage of the reference pixel by applying the Search Area Stripe Reuse scheme(SASR), and implement high-speed plane interpolator with 3-stage pipeline(Horizontal Vertical 1/2 interpolation, Diagonal 1/2 interpolation, 1/4 interpolation). The proposed architecture was simulated in 0.13um standard cell library. The gate count is 436.5Kgates. The proposed H.264/AVC Fractional Motion Estimation can support 8K UHD at 30 frames per second by running at 187MHz.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.297-312
• /
• 2005

Aggregation is an operation that plays a key role in multidimensional OLAP (MOLAP) systems of data warehouse. Existing aggregation operations in MOLAP have been proposed for file structures such as multidimensional arrays. These tile structures do not work well with skewed distributions. This paper presents a physical design methodology for storage structures ni MOLAP that use the multidimensional tile organizations adapting to a skewed distribution. In uniform data distribution, we first show that the performance of multidimensional analytical processing is highly affected by the similarity of the shapes between query regions and page regions in the domain space of the multidimensional file organizations. And than, in skewed distributions, we reflect the effect of data distributions on the design by using the shapes of the normalized query regions that are weighted with data density of those query regions. Finally, we demonstrate that the physical design methodology theoretically derived is indeed correct in real environments. In the two-dimensional file organizations, the results of experiments indicate that the performance of the proposed method is enhanced by more than seven times over the conventional method. We expect that the performance will be more enhanced when the dimensionality is more than two. The result confirms that the proposed physical design methodology is useful in a practical way.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.229-235
• /
• 2009

Millimeter-scale aligned arrays of thin-multiwalled carbon nanotube (t-MWCNT) on layered Si substrates have been synthesized by oxygen-assisted microwave plasma chemical vapor deposition (MPCVD). We have succeeded in growth of vertically aligned MWCNTs up to 2.7 mm in height for 150 min. The effect of $O_2$ and water vapour on growth rate was systematically investigated. In the case of $O_2$ gas, the growth rate was ${\sim}22{\mu}m/min$, which is outstanding growth rate comparing with those of conventional thermal CVD (TCVD). Scanning electron microscope (SEM), energy-dispersive spectroscopy (EDS), and Raman spectroscopy were used to analyze the CNT morphology, composition and growth mechanism. The role of $O_2$ gas during the CNT growth was discussed on.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.186-196
• /
• 2009

Since it is difficult to extract a high flux ion beam directly at an energy of hyperthermal range ($1{\sim}100\;eV$), especially, lower than 50 eV, the ions should be neutralized into neutral particles and extracted as a neutral beam. A plasma source required to generate and efficiently transport high flux hyperthermal neutral beams should be easily scaled up and produce a high ion density (${\ge}10^{11}\;cm^{-3}$) even at a low working pressure (${\le}$ 0.3 mTorr). It is suggested that the required plasma source can be realized by Electron Cyclotron Resonance (ECR) plasmas with diverse magnetic field configurations of permanent magnets such as a planar ECR plasma source with magnetron field configuration and cylindrical one with axial magnetic fields produced by permanent magnet arrays around chamber wall. In both case of the ECR sources, the electron confinement is based on the simple mirror field structure and efficiently enhanced by electron drifts for producing the high density plasma even at the low pressure.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.26-31
• /
• 1992

Flacherie virus (FV) and Densonucleosis virus (DNV) of the silkworm, Bombyx mori, which give the most severest damage to the silk production in korea, were fed on the mulberry wild silkworm, Bombyx mori mandarina, the mulberry pyralid, Gryphodes phyloalis, and the American fall webworm, Hypantria cunea, to investigate cross infectivity by serological and histopathological at observation. By the Ouchterlony's double difusion test the mulberry wild silkworm was infected with both FV and DNV type 1 (DNV-1) and the mulberry pyralid with DNV-1, so those were confirmed the cross infection. But the American fall webworm was not recognized the cross infection by the same method. The infection and multiplication of the FV in the mulberry wild silkworm was observed in the cytoplasm of the goblet cell with the appearance of the virus-specific vesicle. In DNV-1 infection to the mulberry wild silkworm and the mulberry pyralid, the nuclei of columnar cell in the midgut of both insects was hypertrophied and the nuclei of midgut cell of the mulberry pyralid positively stained with the feulgen stain. Multiplication of DNV-1 in the midgut cell of the mulberry wild silkworm was replicated in two different patterens as linear arrays and large masses, while that of DNV-1 in the muberry pyralid was multiplied as virus masses in several portion of the nuclei of the midgut cell.