• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.521-532
• /
• 2006

Recently, many research initiatives have been underway to improve reception performance of ATSC based DTV signal in mobile channel by adopting multiple antennas. In this paper, we propose a new mobile channel model which can be applicable to any array geometry. And then we propose new channel estimation algorithm which uses PN5l1 sequence in field synch. The proposed algorithm is to estimate channel by correlating the input signal in If frequency band and finding maximum peak, which does not need complicated synchronization circuit. Finally, we propose new receiver structures which can be implemented at the front-end of the existing receiver with no modification. With computer simulation, we verify the performance of the proposed model and verify the performance of the receiver structure with computer simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.167-171
• /
• 2002

As a channel of a DS-CDMA system is shared among several users, the receivers face the problem of MAI. Also the multipath scenario leads to ISI. Both components are undesired, but unlike the additive noise process, which is usually completely unpredictable, their space-time structure helps to estimate and remove them. This paper investigates a DS-CDMA system with a fading multipath channel. The investigations have been separated into a channel estimation part and a reception part. In the first part, the estimation of multipath parameters(DOA, TOA) are considered, space-time beamformers(Decorrelating, Match-Filter, Wiener-Hopf) are performed in the second part. To assess many different estimation techniques and beamformers, the simulation compared with theoretical values is performed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.165-174
• /
• 2021

This study describes a method of measurement and verification of array manifold of uniform circular array antenna applicable to multistatic Passive Coherent Location(PCL) system using FM broadcasting. In an environment of outdoor test where FM broadcast signals are scattered, array manifold measurement methods using network analyzer and multi-channel digital receiver are introduced. Also, the descriptions and solutions for the test limits of each measurement method and the considerations affecting the measurement accuracy are presented. In addition, to verify the validity of the measured array manifold, the gain and phase difference were compared with the array manifold data obtained by EM simulation, and the effectiveness and accuracy of the measured array manifolds were compared and analyzed by estimating the direction of arrival of the FM broadcast signal received from the multistatic PCL system.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.85-88
• /
• 2001

In this paper we consider a problem of blind co-channel signal separation, the goal of which is to estimate multiple co-channel digitally modulated signals using an antenna array. We employ the joint maximum likelihood estimation and present a sequential algorithm, which is referred to as sequential joint maximum likelihood (SJML) algorithm. It separates multiple co-channel signal on-line and converges fast in overdetermined noisy communication environment. And the computational complexity of SJML for M-QAM (M=8, 16, 64,...) signals is less expensive compared to the SLSP. Useful behavior of this algorithm are confirmed by simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.949-954
• /
• 2008

An ultrawide band (UWB) signal model is proposed to estimate the angle-of-arrivals of the signals arrived in clusters at an UWB receiver for a short-range, high-speed, indoor wireless communication system in an elliptical scattering environment. And a new estimation technique is proposed by modifying the conventional MUSIC algorithm. By using this estimation technique, the estimates of the two unknown parameter sets, angle-of-arrivals and distribution parameters, are obtained with the proposed UWB signal model. The proposed UWB signal model and estimation technique are verified through computer simulations in an ultrawide band communication environment.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.685-688
• /
• 2003

In this paper, a performance comparison between two blind signal estimation algorithms in a LTI channel is considered. The two algorithms, Iterative Least-Squares with Projection (ILSP) and a modified ILSP, are based on the finite-alphabet property of input symbols. This case typically arises in a multiple access system with a sensor array antenna at the receiving end. We start with the formulation of a maximum-likelihood (ML) estimation problem under an additive white Gaussian noise assumption. A blind ML estimator is derived with its iterative algorithm for calculation. Then we narrow down the consideration of this problem to QPSK case so that a modified algorithm is proposed for $\pi$/4-QPSK case. The modified version is compared with the original ILSP algorithm in terms of the rate of the convergence to global minima. A computer simulation shows that the modified algorithm gives a better performance. This result implies that the performance of the blind separation algorithms may be greatly improved by adopting a smart coding scheme with rich structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1167-1173
• /
• 2005

In this paper, the use of an antenna array is considered for code timing acquisition of DS-CDMA signals. The probabilities of acquisition are evaluated by applying multiple narrow fixed-beams to the conventional MUSIC acquisition approach in the multiuser environment on the time-varying Rayleigh fading channel. Each fixed-beam for spatial filtering is dedicated to an individual angular sector that is formed by dividing the entire angular domain by the number of antenna elements. The fixed-beams with a capability of interference suppression provide the additional degrees of freedom,. Hence, the multibeam-based MUSIC estimator can be used to synchronize to more users than the conventional MUSIC algorithm for one antenna. The multibeam-based subspace method is evaluated to significantly improve the performance of a single antenna based MUSIC technique in multiuser scenarios.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1654-1659
• /
• 2003

In this paper, the performance evaluation of the JADE-MUSIC estimation based on the indoor channel is presented. By means of the JADE-MUSIC algorithm, DOA and time delay can be obtained simultaneously. In the JADE-MUSIC method, the channel impulse response is first estimated from the received samples and then this impulse response is employed to estimate DOAs and time delays of multipath waves. Moreover, according to the JADE-MUSIC characteristics, it can work in cases when the number of impinging waves is more than the number of antenna elements, unlike the traditional parametric subspace-based method, such a case is not true. Therefore, we employ the JADE-MUSIC algorithm applying for the real indoor environment where is rich of the multipath propagation waves and can imply that the number of waves is very possibly higher than that of the array element. The experiment is carried out in our laboratory considered to be the real indoor environment. The performance of the JADE-MUSIC algorithm is evaluated in terms of the comparison between the simulation and experiment results by using the simulated channel model and the real indoor channel model, respectively. It is clear that the joint angle and delay estimation using the simulated channel model are in good agreement with the estimation using the real indoor channel model. Therefore, we can say that the JADE-MUSIC algorithm accomplishes the high performance to jointly estimate the angle and delay of the arriving signal for the indoor environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.551-559
• /
• 2005

Estimation of unknown signal parameters with sensor array measurements has been investigated quite extensively. Also, there has been in recent years an explosive increase in the number of mobile users in wireless cellular systems, thus contributing to growing levels of multi-user interference. To overcome this problem, application of adaptive antenna array techniques to further increase the channel capacity has been discussed. In this paper, a new model of locally scattered signals in the vicinity of mobiles is proposed by defining the mean steering vector and is manipulated mathematically for several distributions. Under this model an estimation method of the angle of arrival(AOA) is investigated based on a weighted subspace fitting(WSF) technique. Statistical analysis and simulations are also considered.