• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.825-827
• /
• 2003

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/ offset and on-board image data compression/storage. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the architecture and function of MSC hardware including electrical interface and the operation concept which have been established based on the mission requirements are described. And the design and the preparation of MSC system operation are analyzed and discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.388-391
• /
• 2003

The properties of these detectors can be controlled by electronics and exposure conditions. Flat-panel detectors for digital diagnostic imaging convert incident x-ray images to charge images. Flat panel detectors gain more interest real time medical x-ray imaging. Active area of flat panel detector is $14{\times}17$ inch. Detector is based on a $2560{\times}3072$ away of photoconductor and TFT pixels. X-ray conversion layer is deposited upper TFT array flat panel with a 500m by thermal deposition technology. Thickness uniformity of this layer is made of thickness control technology(5%) of thermal deposition system. Each $139m{\times}139m$ pixel is made of thin film transistor technology, a storage capacitor and charge collection electrode having geometrical fill factor of 86%. Using the separate driving system of two dimensional mosaic modules for large area, that is able to 4.2 second per frame. Imaging performance is suited for digital radiography imaging substitute by conventional radiography film system..

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.2
• /
• pp.162-169
• /
• 2019

This paper describes a thermal image processing algorithm for uncooled type TEC-less IR detector which is applicable to fire control system of small arms. We implemented a real-time gain and offset compensation algorithm based on polynomial approximation from the raw dataset which is acquired by two reference temperature of blackbody from various FPA(Focal Plane Array) temperature. Through the experiment, we analyzed the output characteristics of detector's raw-data and compared IR image quality to traditional non-uniformity correction method. It shows that the proposed method works well in all FPA temperature range with low residual non-uniformity.

• ETRI Journal
• /
• v.41 no.4
• /
• pp.536-548
• /
• 2019

In this study, an electronically steerable parasitic array radiator (ESPAR) antenna via analog radio frequency (RF) switches for a single RF chain MIMO system is presented. The proposed antenna elements are spaced at ${\lambda}/64$, and the antenna size is miniaturized via a dielectric radome. The optimum reactance load value is calculated via the beamforming load search algorithm. A switch simplifies the design and implementation of the reactance loads and does not require additional complex antenna matching circuits. The measured impedance bandwidth of the proposed ESPAR antenna is 1,500 MHz (1.75 GHz-3.25 GHz). The proposed antenna exhibits a beam pattern that is reconfigurable at 2.48 GHz due to changes in the reactance value, and the measured peak antenna gain is 4.8 dBi. The reception performance is measured by using a $4{\times}4$ BPSK signal. The measured average SNR is 17 dB when using the proposed ESPAR antenna as a transmitter, and the average SNR is 16.7 dB when using a four-conventional monopole antenna.

• Journal of Genetic Medicine
• /
• v.16 no.1
• /
• pp.15-18
• /
• 2019

SHORT syndrome is an extremely rare congenital condition due to a chromosomal mutation of the PIK3R1 gene found at 5q13.1. SHORT is a mnemonic representing six manifestations of the syndrome: (S) short stature, (H) hyperextensibility of joints and/or inguinal hernia, (O) ocular depression, (R) Rieger anomaly, and (T) teething delay. Other key aspects of this syndrome not found in the mnemonic include lipodystrophy, triangular face with dimpled chin (progeroid facies, commonly referred to as facial gestalt), hearing loss, vision loss, insulin resistance, and intrauterine growth restriction (IUGR). 3q duplication syndrome is rare syndrome that occurs due to a gain of function mutation found at 3q25.31-33 that presents with a wide array of manifestations including internal organ defects, genitourinary malformations, hand and foot deformities, and mental disability. We present a case of a 2 year and 3 month old male with SHORT syndrome and concurrent 3q duplication syndrome. The patient presented at birth with many of the common manifestations of SHORT syndrome such as bossing of frontal bone of skull, triangular shaped face, lipodystrophy, micrognathia, sunken eyes, and thin, wrinkled skin (progeroid appearance). Additionally, he presented with findings associated with 3q duplication syndrome such as cleft palate and cryptorchidism. Although there is no specific treatment for these conditions, pediatricians should focus on referring patients to various specialists in order to treat each individual manifestation.

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.408-418
• /
• 2023

Due to the technological limitations of infrared thermography, infrared focal plane array (IFPA) imaging exhibits stripe non-uniformity, which is typically fixed pattern noise that changes over time and temperature on top of existing non-uniformities. This paper proposes a stripe non-uniformity correction algorithm based on scene-adaptive nonlinear filtering. The algorithm first uses a nonlinear filter to remove single-column non-uniformities and calculates the actual residual with respect to the original image. Then, the current residual is obtained by using the predicted residual from the previous frame and the actual residual. Finally, we adaptively calculate the gain and bias coefficients according to global motion parameters to reduce artifacts. Experimental results show that the proposed algorithm protects image edges to a certain extent, converges fast, has high quality, and effectively removes column stripes and non-uniform random noise compared to other adaptive correction algorithms.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.122-132
• /
• 2010

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in the same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK or QPSK signal as enhancement layer to existing DQPSK signal. The enhancement layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of conventional T-DMB service coverage. But this causes the enhancement layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has improved error correction capability than convolutional code, is applied to the enhancement layer signal of the AT-DMB system for compensating channel distortion. However there is a need for other solutions for better reception of AT-DMB signal in receiver side without increasing transmitting power. In this paper, we propose adaptive array antenna system with Eigen-space beamforming algorithm which benefits beamforming gain along with diversity gain. We analyzed the reception performances of AT-DMB system in indoor and mobile environments when this new smart antenna system and algorithm is introduced. The computer simulation results are presented along with analysis comments.

• Journal of Nutrition and Health
• /
• v.51 no.5
• /
• pp.369-378
• /
• 2018

Purpose: Obesity is associated with a dysregulation of metabolic balance and is regarded as a low grade chronic inflammation. Western-style diet and physical inactivity are leading causes of obesity. This study examined the profiles of forty plasma cytokines and chemokines at the same time in the early stages of high-fat diet-induced obesity using a mouse model. Methods: A total of 30 male CD1 mice, 12 ~ 14 weeks of age, were enrolled. The mice were fed a high-fat diet for 6 weeks to induce obesity. The plasma glucose and triglyceride concentrations were measured using a hexokinase colorimetric assay kit and a serum triglyceride determination kit, respectively. The relative levels of multiple cytokines and chemokines in the plasma were determined using a mouse cytokine array kit. Results: The mice exhibited significant weight gain after 6 weeks of a high-fat diet. The genital fat depot was enlarged along with an increase in the number and the mean size of white adipocytes as early as 4 weeks after a high-fat diet. In addition, the plasma glucose and triglyceride levels increased significantly after 4 weeks of a high-fat diet. Cytokine array analysis revealed a remarkable increase in the expression of both CXCL12 and CXCL13, whereas the proinflammatory cytokines remained low after 4 weeks of a high-fat diet. Conclusion: A significant increase in plasma levels of CXCL12 and CXCL13 was observed after 4 weeks of a high-fat diet, which might induce the migration of B lymphocytes, T lymphocytes, and monocytes from the blood to expanding adipose tissue or fat associated lymphoid clusters, playing a key role in adipose tissue remodeling and local immunity during the early stages of high-fat diet-induced obesity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.770-777
• /
• 2020

Objective: This study was conducted to determine early hereditary endowment to establish a short-term feeding program. Methods: Hanwoo steers (n = 140) were equally distributed into four groups (35/group) based on genetic meat yield index (MYI) viz. the greatest, great, low, and the lowest at Jukam Hanwoo farm, Goheung. All animals were fed in group pens (5 animals/pen) with similar feed depending on the growth stage. Rice straw was provided ad libitum, whereas concentrate was fed at 5.71 kg during the growing period (6 to 13 mo) and 9.4 kg during the fattening period (13 to 28 mo). Body weight (BW) was measured at two-month intervals, whereas carcass weight was determined at slaughtering at about 31 months of age. The Affymetrix Bovine Axiom Array 640K single nucleotide polymorphism (SNP) chip was used to determine the meat quantity-related gene in the blood. Results: After 6 months, the highest (p<0.05) BW was observed in the greatest MYI group (190.77 kg) and the lowest (p<0.05) in the lowest MYI group (173.51 kg). The great MYI group also showed significantly (p<0.05) higher BW than the lowest MYI group. After 16 and 24 months, the greatest MYI group had the highest BW gain (p<0.05) and were therefore slaughtered the earliest. Carcass weight was significantly (p<0.05) higher in the greatest and the great MYI groups followed by the low and the lowest MYI groups. Back-fat thickness in the greatest MYI group was highly correlated to carcass weight and marbling score. The SNP array analysis identified the carcass-weight related gene BTB-01280026 with an additive effect. The steers with the allele increasing carcass weight had heavier slaughter weight of about 12 kg. Conclusion: Genetic MYI is a potential tool for calf selection, which will reduce the slaughter age while simultaneously increasing carcass weight, back-fat thickness, and marbling score.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.503-507
• /
• 2007

In this paper, the ultra-widebend, microstrip patch antenna with the bandwidth of 3 GHz was implemented for ultra-wideband(UWB) wireless communication applications. In order to cover the very wide bandwidth of 3 GHz, a multi-resonance antenna was designed, each resonance frequency was separated into five frequency bend, 7.5, 8.1, 8.7, 9.3, and 9.9GHz with the interval of 600MHz BW. And for wideband characteristics of each antenna, U-slot antennas were designed at each center frequency. Designed five U-slot antennas were connected in series for multi-resonance of 3GHz BW and wideband matching was also designed for impedance matching transmission line calculated. The relative dielectric constant, the height, the loss tangent of the PCB substrate were ${\epsilon}_r=4.8,\;h=0.6$ and loss tangent=0.0009 respectively. The implemented antenna's radiation patterns and gain were directivity characteristics and $1.46{\sim}4.08dBi$ at the five separated center frequency.