• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.41-46
• /
• 2006

This paper describes a marine watch system on a ship, which is aided by an image processing method. The system detects other ships through a navigational image sequence to prevent oversights, and it measures their bearings to maintain their movements. The proposed method is described, the detection techniques and measurement of bearings techniques are derived, and the results have been reported. The image is divided into small regions on the basis of the brightness value and then labeled. Each region is considered as a template. A template is assumed to be a ship. Then, the template is compared with frames in the original image after a selected time. A moving vector of the regions is calculated using an Excel table. Ships are detected using the characteristics of the moving vector. The video camera captures 30 frames per second. We segmented one frame into approximately 5000 regions; from these, approximately 100 regions are presumed to be ships and considered to be templates. Each template was compared with frames captured at 0.33 s or 0.66 s. In order to improve the accuracy, this interval was changed on the basis of the magnification of the video camera. Ships’ bearings also need to be determined. The proposed method can measure the ships’ bearings on the basis of three parameters: (1) the course of the own ship, (2) arrangement between the camera and hull, and (3) coordinates of the ships detected from the image. The course of the own ship can be obtained by using a gyrocompass. The camera axis is calibrated along a particular direction using a stable position on a bridge. The field of view of the video camera is measured from the size of a known structure on the hull in the image. Thus, ships’ bearings can be calculated using these parameters.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.508-518
• /
• 2021

Recently as a result of covid 19, it has emphasis on the importance of non-contact. VR content has been attracting attention as an alternative to visual arts, media art, new media exhibitions and performances with limited offline activities. Although interest in 360 VR video contents such as VR contents for exhibitions and performances is increasing, research on immersion and satisfaction is focused on games and animation VR contents. In this paper, it verified the effect of the difference in the position and height of the VR camera in exhibitions and performances on the user's presence and satisfaction. For this experiment, the presence and satisfaction were measured after experiencing the VR contents of the convergence exhibition and performance filmed at different locations and heights. As a result of the experiment, the difference of VR camera's position had a significant effect on presence and satisfaction, the difference of VR camera's height had a significant effect only Realistic immersion of the presence.

• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.420-430
• /
• 2006

In this paper, we propose a flexible GGOP prediction structure to improve coding efficiency for multi-view video coding. In general, reference software used for MVC uses the fixed GGOP prediction structure. However, the performance of MVC depends on the base view and numbers of B-pictures between I-picture(or P-picture) and P-picture. In order to implement the flexible GGOP prediction structure, the location of base view is decided according to the global disparities among the adjacent sequences. Numbers of B-pictures between I-picture(or P-picture) and P-picture are decided by camera arrangement such as the baseline distance among the cameras. The proposed method shows better result than the reference software of MVC. The proposed prediction structure shows considerable reduction of coded bits by 7.1%.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.167-175
• /
• 2002

Image Mosaicing creates a new image by composing video frames or still images that are related, and performed by arrangement, composition and redundancy analysis of images. This paper proposes a hierarchical image mosaicing system using camera and object parameters far efficient video database construction. A tree-based image mosiacing has implemented for high-speed computation time and for construction of static and dynamic image mosaic. Camera parameters are measured by using least sum of squared difference and affine model. Dynamic object detection algorithm has proposed for extracting dynamic objects. For object extraction, difference image, macro block, region splitting and 4-split detection methods are proposed and used. Also, a dynamic positioning method is used for presenting dynamic objects and a blurring method is used for creating flexible mosaic image.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2009

With supply of the domestic digital camera, the relative importance of the digital camera is coming to be high gradually on aerial photogrammetry, the image of digital camera is more applied in image map or digital topographic map production. But, there are cases that do not have position information or attitude information of each photograph in digital camera results. Therefore, we wish to present additional method to get more accurate photograph control point result. In this study, One is called A method, which is the case of entering positioning information of principal point from topographic map as default values that are need to extract tie point automatically using by 56 pieces of photography that are photographed by DMC to the extent to 5 courses and 35 GCP points. The other is called B-method, which is the case of entering exterior orientation parameters that are processed by block adjustment for A-method using by 4 control points in method-1 as default values. We have analyzed about results per control points arrangement for two cases using MATCH-AT that is photograph control point measurement S/W of Germany INPHO company. As a result of analysis, accuracy of B-method was better than that of A-method, and we could get more accurate results if block adjustments are executed including self calibration. Also, it is more effective in expense side that using self calibration for photograph survey in B-method because can reduce GCP numbers.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.134-141
• /
• 2002

The ER fluid can be one of efficient materials in ultraprecision polishing for optics, ceramics and semiconductors because of electrically controllable apparent viscosity. To finish small 3 dimensional structures such as the aspherical surface in optical elements, the possible arrangement of a tool, workpiece and auxiliary electrode is described. We examined the influence of the addition of a few abrasive particles on the performance of the ER fluid by measuring yield stress, and observed the behavior of abrasive particles in the ER fluid by a CCD camera, which is also theoretically predicted from the electromechanical principles of particles. On the basis of the above results, the steady flow analysis around the rotating micro tool is worked out considering the non-uniform electric field. Finally, Pyrex glass is polished using the mixture of the ER fluid and abrasive particles, and the effect of the electric field strength is evaluated.

• Journal of Korea Foundry Society
• /
• v.14 no.6
• /
• pp.576-589
• /
• 1994

Water modeling experiments and computer simulation for the predictions of defects of die castings are very important to produce high quality castings with less cost. The relation between the variable air vent system and the characteristics of the fluid flow in the die cavity is studied by using water modeling tests, which give ideas on reasonable designing of die cavity, vent arrangement and gating system. In order to test the water modeling, injection is done by using water containing NaCl. Flow behaviors in cavities are visualized by high speed camera and video tape recorder, and local filling time is measured with electrode sensors. Special attention is paid to the configuration of die cavity. Simulated results by computer are examined and compared with the results of water modeling experiments. There are close correlations between the simulated results and water modeling ones.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.713-721
• /
• 2022

In order to use the LED video wall in the broadcasting studio, there are a few things to be aware of. First, since the pixels are closely arranged, a moire phenomenon may occur due to a short arrangement period, and second, the distance between pixels (pixel pitch) may be recorded on the image sensor of the broadcasting camera. When moire occurs or pixel pitch is observed, viewers feel uncomfortable. Moire effect can be reduced by adjusting the shooting distance or angle of the camera, but in order to prevent the pixel pitch from being recorded on the image sensor, secure a sufficient distance between the LED video wall and camera. even when the distance secured, the zoom lens used in the broadcasting studio must be operated by appropriately changing the magnification. If the focal length is changed by changing the magnification to obtain a desired angle of view, the pixel pitch may be unintentionally recorded. In this study we propose the range that the pixel pitch is not observed while changing the magnification ratio of the zoom lens when the distance from the video wall is sufficiently secured. The content was played back on the LED video wall and the LED video wall was recorded on the server using an HD camera equipped with a B4 mount zoom lens

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.426-430
• /
• 2005

The fiber-optic interferometer which is a powerful application for nondestructive measurement techniques has many advantages such as capability of making portable system, easy optical arrangement, low optical loss. In spite of these advantages, this system has an environmental sensitivity of thermal drifts and vibrations. Against environmental perturbations and nonlinear characteristic of phase modulator, the accurate and fast ${\pi}/2$ phase stepping has been achieved by using zero-crossing detection. CCD camera trigger signal is generated at the 4 zero-crossing points. Our System has achieved up to 100 Hz of image capture speed and 0.6 mrad of accuracy of phase stepping, accuracy.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.471-474
• /
• 2002

A new stereoscopic PIV has been constructed using two CCD cameras, stereoscopic photogrammetry, and 3D-PTV principle. The capability of the developed stereoscopic PIV was verified through a test on the Standard Images which are provided on the website of VSJ. The arrangement of the two cameras was based on angular position For the acquisition of 3D velocity vectors, 2D velocity vectors were obtained using the gray-level cross-correlation method from the two camera images and they were matched stereoscopically. The wake of a circular cylinder was measured and turbulent properties were presented.