• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.501-508
• /
• 2006

The effect of chemical additives, such as dimethyl ether(DME), ethanol, carbon disulfide on the soot formation were examined numerically. ill this study, the Frenklach soot mechanism was used as a base mechanism to predict the soot formation in the ethane flame. The combination of Westbrook's DME mechanism, Marinov's ethanol mechanism, and chemical kinetic mechanism for hydrogen sulfide and carbon disulfide flames was made with the base mechanism because the DME, ethanol, $CS_2$ additives are added into the ethane fuel. CHEMKIN code was used as a numerical analysis software to simulate the effect of chemical additives on reduction of the polycyclic aromatic hydrocarbons(PAH's) which are soot precursors. From the numerical results it is observed that addition of DME, ethanol and $CS_2$ into ethane fuel can reduce PAH species significantly. That means theses additives can reduce soot formation significantly. Results also strongly suggest suppression of soot formation by these additives to be mainly a chemical effect. Hand OH radicals may be the key species to the reduction of PAH species for additives.

• Archives of Pharmacal Research
• /
• 제7권1호
• /
• pp.1-9
• /
• 1984

Polyethylene glycol 20, 000 and 6, 000 were found to have an upper consolute temperature, called "cloud point", and the effects of various additives on the polythylene glycols were investigated in this study. Electrolytes lowered the cloud point in proportion to their concentrations through dehydration and electrostriction. It was found that anions played a more important role than cations and the effects of both the cations and the anions clearly followed the classical Hofmeister series. However, the Schultze Hardy rule holds for the effect of anions, and fails for the effect of cations. Salts of large polarizable anions such as iodide and thiocynate rather raised the cloud point, and their effects were ascribed to the fact that they break the water structure and weaken hydrophobic bonding of the polyxyethylene moiety. Nitrates of polyvalent cations also raised the cloud point. This was ascribed to the complex formation between the polyvalent cations and ether oxygens of the polyoxyethylenes. This explained the failure 'of the Schultz-Hardy rule for cations. Uncharged aromatic compounds drastically lowered the clound point, while aliphatic alcohols slightly lowered the cloud point, This result suggests that there might be some interaction between ether oxygens and aromatic nucleus.c nucleus.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.1-6
• /
• 2016

In this article, the recent developments in electroless plating of copper, electroless bath formulation and effect of plating parameters have been reviewed. Cyanide free electroless baths are now being developed and studied due to the various environmental concerns. Various organic chemicals such as complexing agents, reducing agents, and additives such as poly-alcohols and aromatic ring compounds have been added to copper plating baths for promising results. The effects of various reducing and complexing agents, bath conditions like additives, bath pH, and composition have been summarized. Finally the applications of the electroless plating of copper and latest developments have been overviewed for further guidance in this field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.193-196
• /
• 2001

XLPE is occasionally happened to deteriorate cable insulation characteristics. It is happened to do a breakdown state by the degradation of electrical characteristic and electrical breakdown strength. I prepared TR-XLPE (Tree-Retardant XLPE) as adding various additives to prevent its states. Various additives are treeing retardants, anti-oxidants. Treeing retardants three kinds of aromatic compounds as adding each additive. Anti-oxidants use quinone compound and cresol compound as adding each additive. In order to observe each electrical characteristics, I measured breakdown strength, relative dielectric constant$({\varepsilon}_r)$, dielectric loss tangent$(tan{\delta})$. TR-XLPE specimens as adding treeing retardants and anti-oxidants enhance breakdown strength, ${\varepsilon}_r$, $tan{\delta}$ than pure XLPE.

• Journal of Pharmaceutical Investigation
• /
• 제39권1호
• /
• pp.43-49
• /
• 2009

Aspirin or acetylsalicylic acid, a member of the salicylate family, is frequently used as an analgesic, antipyretic, anti-inflammatory and antiplatelet drug. Because aspirin is chemically unstable in water and heat for tablet formulation, additives including lubricants are used in preparing aspirin tablets, using a dry-granulation process. Aspirin tablets are produced by a number of manufacturers which usually use their own unique combination of additives during the manufacturing process. In this study, we employed an NMR based metabolomics technique to identify the manufacturers of various aspirin tablets. Aspirin tablets from six different companies were analyzed by 1H 400 MHz NMR. The acquired data was then integrated and processed by principal component analysis (PCA). Based on the NMR data, we were able to identify peaks corresponding to acetylsalicylic acid in all of the six samples, whereas different NMR patterns were found in the aromatic and aliphatic regions depending on the unique additive used. These observations led to the conclusion that the differences in the NMR patterns among the different aspirin tablets were due to the presence of additives.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.1-9
• /
• 2010

Conducting polymer films grown from various aromatic compounds have been evaluated as overcharge protecting additives for lithium ion rechargeable batteries. The polymer films were grown electrochemically under the conditions similar to those encountered during the overcharging processes of lithium batteries and subsequently characterized by potentiodynamic, electrochemical quartz crystal microbalance, electrochemical impedance spectroscopic, and scanning electron microscopic experiments. Results indicate that bicyclic and polycyclic aromatic hydrocarbons would be poor candidates for inhibitors, while biphenyl, terphenyl, and benzene derivatives displayed excellent performances. Mixed polymer films grown from o-terphenyl and p-xylene show the best performance among the candidates.

• 대한전기학회논문지
• /
• 제35권1호
• /
• pp.17-25
• /
• 1986

Discussions on this paper are related to the effects of organic materials to treeing phenomena of low density polyethylene. As additives, 11 kinds of organic compounds are selected by considering the respective features such as melting point, boiling point, electron affinity as well as molecular structure, and then the specimens of low density polyethylene are prepared by blending with 10wt% of the selected additives. For the comparison of effectiveness of treeing resistance and interpretation of the mechanism of compounds as treeing retardants, several investigations such as the tree acceleration test, the prestressed test and the measurement of internally occurred partial discharge are carried out. As the results, meta-Cresol is regard as the most effective retardant among those, and it is supposed that this aromatic compound to be comprised of radical having large electron affinity has strong capability to accept energetic electron to prevent or delay the growth of discharge streamer. Furthermore, by activating partial discharge at the wall of tree pit through the function of trapped electron at this material, the gas pressure in the pit is increased up to prevent the growth of streamer.

• 대한화학회지
• /
• 제18권6호
• /
• pp.443-446
• /
• 1974

內然機關에서 採取한 廢油를 黃酸白土 處理하여 얻어진 再生油는 원래 들어 있던 添加劑, 特히 酸化防止劑와는 相關없이 酸化安定性이 좋아졌다. 이러한 性質의 改善은 芳香族化合物이 거의 25%나 增加하는 事實로 미루어 耐酸化性物質의 生性에 基因하는 것으로 考察된다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.97-104
• /
• 2016

OBJECTIVES : The objective of this research is to develop additives for the modification of Solvent DeAsphalting Residue (SDAR) to be used as pavement materials, and evaluate the performance of asphalt mixture manufactured using the SDAR modified by developed additives. METHODS : The SDAR generally consists of more asphaltenes and less oil components compared to the conventional asphalt binder, and hence, the chemical/physical properties of SDAR are different from that of conventional asphalt binder. In this research, the additives are developed using the low molecular oil-based plasticizer to improve the properties of SDAR. First, the chemical property of two SDARs is analyzed using SARA (saturate, aromatic, resin, and asphaltene) method. The physical/rheological properties of SDARs and SDARs containing additives are also evaluated based on PG-grade method and dynamic shear-modulus master curve. Second, various laboratory tests are conducted for the asphalt mixture manufactured using the SDAR modified with additives. The laboratory tests conducted in this study include the mix design, compactibility analysis, indirect tensile test for moisture susceptibility, dynamic modulus test for rheological property, wheel-tracking test for rutting performance, and direct tension fatigue test for cracking performance. RESULTS : The PG-grade of SDARs is higher than PG 76 in high temperature grades and immeasurable in low temperature grades. The dynamic shear modulus of SDARs is much higher than that of conventional asphalt, but the modified SDARs with additives show similar modulus compared to that of conventional asphalt. The moisture susceptibility of asphalt mixture with modified SDARs is good if, the anti-stripping agent is included. The performance (dynamic modulus, rutting resistance, and fatigue resistance) of asphalt mixture with modified SDARs is comparable to that of conventional asphalt mixture when appropriate amount of additives is added. CONCLUSIONS : The saturate component of SDARs is much less than that of conventional asphalt, and hence, it is too hard and brittle to be used as pavement materials. However, the modified SDARs with developed additives show comparable or better rheological/physical properties compared to that of conventional asphalt depending on the type of SDAR and the amount of additives used.

• 한국축산식품학회지
• /
• 제40권5호
• /
• pp.699-709
• /
• 2020

This study utilized the crust by-product from dry-aged beef as a flavor enhancer for brown sauce and analyzed its physicochemical and organoleptic properties. The physiochemical properties include proximate composition, color, pH, swelling yield, viscosity, and salinity. The organoleptic properties were studied through electronic nose and sensory evaluations. The moisture content of the samples decreased while fat and protein content increased as crust content increased (p<0.05). The lightness, yellowness, and redness increased with increasing crust content (p<0.05). The pH of the samples also increased as the crust content increased. The viscosity significantly increased while salinity decreased with increasing crust content (p<0.05). The aromatic profiles of the control and samples with 5% and 10% crust addition were distinguishable; however, samples with crust additives between 10% and 15% gave similar aromatic profiles. The taste of the control sample was significantly lower than that of the samples formulated with the crust (p<0.05), and the sensory viscosity of the samples with 10% crust was significantly higher than that of the control (p<0.05). Flavor and overall acceptability tended to increase with increasing crust content of up to 10% addition (p<0.05). These results show that the crust from dry-aged beef loin crust is a suitable natural flavor enhancer for brown sauce and improves its physiochemical and organoleptic properties.