This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.
The purpose of this study was to examine the characteristics of armscye circumference which will be used to develop total contents for the apparel industry. The subjects of this study were 16- to 49-year-old women whose 3D body shape data were analyzed. 72 length and length-ratio measurements were taken to each subject' armscye circumference. The used analysis methods are descriptive statistics, principal component analysis, and cluster analysis. The results are follows; 1. Considering the Length of armscye circumference, the result of principal component analysis were extracted 3 factors and those factors comprised 95% of total variance. As the result of the cluster analysis of factor scores, subjects were classified into 4 cluster by their size characteristic. 2. Considering the length-ratio of armscye circumference, the result of principal component analysis were extracted 5 factors and those factors comprised 96.45% of total variance. As the result of the cluster analysis of factor scores, subjects were classified into 5 cluster by their shape characteristic. So that, this research could be useful to manufacture garment which reflected 3D body figure and improved fitting.
This study establishes the initial data to develop a well-fitted underwear pattern by categorizing and analyzing torso types based on body measurements of women in their 50s and 60s. The results are as follows: First, the statistical assessment on the body measurements showed meaningful differences among age groups in twenty seven items (except for bust breadth, hip width armscye depth, hip depth, neck base circumference, armscye circumference, chest circumference, hip circumference, bishoulder length, shoulder length, front interscye, back interscye, weight and inclined angle of left shoulder). Women in their early 50s and late 60s (respectively) showed the highest values in height and depth. Second, there are five body factors according to the results of the factor analysis: Factor 1 (circumference, width, and depth of upper body measurements) - the degree of body depth and obesity, Factor 2 (height and vertical length) - The vertical torso length, Factor 3 - the size of shoulder, Factor 4 - the vertical upper body length, and Factor 5 - the size of shoulder angle. Third, the results of the cluster analysis showed that there are four distinctive body types. The largest number of the study subjects was related to Type 3 (30.69%), followed by Type 2 (26.78%), Type 1 (25.84%), and Type 4 (16.69%), respectively. For distribution of age groups by body type, Type 3 was the most common among the 60s group while Type 2 appeared most frequently among the 50s.
The purpose of this study is to evaluate a new flight suit in bilateral ways; subjectively and objectively in the improvements of comfort and mobility. Seven healthy males at the age of twenties volunteered in this wearing test. They were over 177 cm in height and 92-95 cm in chest circumference, which satisfies the M95 Special' size described in the Korean Military Specifications and Standards. The subjective satisfaction was evaluated according to the criteria of ease of donning and doffing, fitness of wear, mobility, space between cloth and body, convenience in using restroom. Subjective satisfaction evaluation says that the best improvement of movement are neck circumference, chest breadth, armscye circumference, waist back length, crotch length, crotch height and body rise. According to the evaluation, improvements of mobility were conspicuous especially in parts of body like neck, breast, waist, back, and arms. When evaluating objective satisfaction, we measured a angle difference in a prescribed standard-grid on a photograph that picked up while the subject performed each motion in front of 10 cm-interval grid. As a result, the motion that had angle difference above 5 degrees were arm stretching and standing on single leg holding at forward or at his side. Bending necks and waist, crouching also had angle difference of over 5 degrees. The improvements are discussed from the viewpoint that the increased ease in parts of armscye circumference and crotch in new flight suit pattern.
This study uses comparison tests of bodice basic patterns to research improvements in wearing evaluation methods based on differences in bodice basic patterns and body size. As study methods, we calculated body sizes for six types by selecting four types of bodice basic pattern and utilized bodice basic pattern size measurement tools. The study result are as follows. First, as the result of analyzing bodice basic patterns per each part and body size difference by bodice basic pattern size measurement tool, shoulder angle cover rate was J&K type 57.57%~68.41%, N type 53.13%~65.57%, L type 51.87%~63.73%, and H type 59.03%~68.20%. In the item of neck base circumference, it was J&K type 6.4~-16 mm, N type 10.7~-31.9 mm, L type -5.2~-13.4 mm, and H type -6.2~-15.4 mm. In the item of armscye circumference, it was J&K type -18.9~-59.4 mm, N type -15.2~-51.3 mm, L type -38.9~-52.7 mm, and H type -17~-42.2 mm. In the item of biacromion length, it was J&K type 23.2~-4.7 mm, N type 18.4~-10.4 mm, and H type 3.5~-5.7 mm. In the item of interscye back, it was J&K type and N type 17.6~-13.6 mm, L type 11.9~-13.6 mm, and H type 3.2~-11.8 mm. The item of interscye front was found in the sequences of study type and L type. Second, the Kruskal-Wallis test result (according to bodice basic pattern) indicated meaningful differences in items of shoulder angle cover rate, neck point to breast point, bust point-bust point, biacromion length and armscye circumference and H type had an overall higher rank.
This study was to provide the fundamental data for the ease necessary to design clothes by investigating the variation of the upper body surface with the method of surgical tape. The subject were 8 young women in the standard somatotype. In the form of body surface according to arm movements, the shape of armscye circumference became gentle from the sunken form for the standing posture; scye depth became lower; lateral shoulder moved and rose toward the front center as the angle of arm movement became larger; scye depth is greatest in the standing. The items of horizontal ware largest in the standing posture except for front neck base circumference and front interscye breadth for side $90^{\circ}$ movement. In the items of vertical, while most of the front items increased but back ones generally decreased for all movement compared to the standing. After comparing differences in actual values between the form of body surface in the standing posture and the direct measurement, the following ease were suggested considering minimum measures to accommodate daily movements. Bust circumference/2 = 3cm; waist circumference/2 = 1.5cm; front interscye breadth/2 = 0.6cm; back interscye breadth/2 = 0.6cm; and underarm depth = 1.5cm
Highly precision body measurements represent basic data required by industry and researches who wish to utilize information about the human body. The proficiency and expertise of the measurers have a significant influence on the error and accuracy of data when various parts from multiple subjects' bodies are measured. Therefore, in order to measure accurate body measurements (when measuring bodies directly), it is necessary to conduct objective analyses on errors. This study calculated the Relative Technical Error of Measurement (%TEM) using data that measured each of 24 subjects and discussed errors and methods to reduce errors by conducting comparison analysis based on measured items and objects. The result of analysis indicated that the errors based on age and gender of the objects of measurement were minor; however, there were comparatively distinct differences in measured errors based on measured items. 'Right and left Shoulder Angle' for all measured subjects displayed the greatest errors and standard deviations. 'Height' dimension, Lateral Malleolus Height and Head Height had big errors; in addition, 'Circumference', Neck Base Circumference and Armscye Circumference also had big errors. More careful measurements of such items with big errors require additional educational plan such as a proposal for more objective and detailed measurement methods. Items with small errors but big standard deviations such as Waist Circumference, Calf Circumference, Minimum Leg Circumference, Chest Circumference, Hip Circumference and Waist Circumference confirmed that errors for them greatly decreased with repeated experiments and resultant measurers increased proficiency; consequently, repeated measuring experiments for these items greatly enhance accuracy.
The purpose of this study was to compare fitting of the upper garment by brassiere cup size and types of bodice block. This study conducted a 3D virtual garment system by applying three types of bodice block (I, II, III) and experimental pattern of the bodice block to 3D avatars of four individuals with the following measurements: under bust circumference of 73.5 cm and bust circumferences of 83.5 cm, 86.0 cm, 88.5 cm, and 91.0cm. The results of the study were as follows. First, for 83.5 cm bust circumference (A Cup), appearance of the three types of bodice block (I, II, III) was appropriate. However, as bust circumference increased in size, shape became inappropriate. The depth and width of the armhole, within 15 cm and 11 cm, respectively, were found to be appropriate. In case of 91.0 cm bust circumference (D Cup), all three bodices (I, II, III) were inappropriate. Second, the results of the draft of the experimental patterns of the bodice block of bust circumference measuring 83.5 cm, 86.0 cm, 88.5 cm, and 91.0 cm in the 3D avatars of the four individuals revealed similarities in the frontal view of the silhouette in the four avatars; in the case of the lateral view of the silhouette, lateral width grew wider as bust circumference of the silhouette became larger, but the shape of armhole showed no changes. The depth of the armhole showed little changes from 15.1 cm to 15.22 cm, and the height of sleeve (armscye depth 13.6 cm within +2 cm) remained similar. The difference in width of the armhole from 11.26 cm to 11.37 cm was rather small. The width of the upper sleeve (8.97 cm) seemed to be appropriate as it remained within the 2-3 cm boundary.
R$\ddot{o}$hrer index, Vervaeck index and Body Mass Index(BMI) are frequently used in order to judge obese subjects in clothing & textiles field. However, there are no certain criteria of judging the degree of obesity. Each researcher utilized these obesity indices according to their own criteria so far. Therefore, the purpose of the study is to suggest a reliable obesity index and new criteria for judging the degree of obesity. The results are as follows; Utilizing frequency analysis, main percentiles, minimums, maximums and ranges were presented by 5 age groups from twenties to sixties. Obesity rates dramatically increased, the subject got older. Especially, obesity rate of the subjects in their fifties and sixties were much higher than other age groups. 1.6 & higher can be used in the R$\ddot{o}$hrer index, 98 & higher can be used in the Vervaeck index, and 25 & higher can be used in the BMI as the Optimal criteria of the obesity. Total of 24 body measurements and 3 obesity indices were used for analyzing the correlation analysis. All heights measurements showed negative correlation with the 3 obesity indices. It is determined heights measurements have high correlation with R$\ddot{o}$hrer index compare to other indices. Crotch height, interscye back, neck shoulder point to breast point, bust circumference, waist circumference, upper arm circumference and armscye circumference have high positive correlation with all obesity indices. According to the ANOVAs by each percentile group of the R$\ddot{o}$hrer and Vervaeck indices, there are big significances in all measurements and obesity indices except arm length. In general, heights decreased significantly by getting bigger, while circumferences and lengths, widths and indices increased rapidly by getting bigger. The results of the analysis by each percentile group in the BMI, it showed the significant differences in the all measurements except cervical height and arm length. There were similar tendency of differences according to the degree of the obesity in BMI percentile groups. It was confirmed that the BMI is the most reliable index for judging the obesity owing to the high correlations and significant differences with other measurements.
본 연구는 복부가 비만한 노년 여성의 의복의 패턴설계를 위한 기초 자료를 제공하기 위한 목적으로 수행되었으며 이들의 체형특성을 분석하고 일반 노년 여성과의 상반신 및 하반신 체형특성의 차이점을 파악하고자 하였다. 연구대상은 60세 이상 서울 및 서울 근교에 거주하는 노년 여성 318명-복부비만 251명, 일반인 67명-이며 직접측정을 실시하였다. 복부비만의 기준은 허리엉덩이둘레비(WHR)가 0.85 이상인 피험자로 하였다. 높이항목, 두께항목, 너비항목, 길이항목 및 몸무게로 구성된 총 33개 측정치 및 측정치를 토대로 한 계산치 및 지수치를 이용하여 기술통계분석, 상관분석, T검정을 실시함으로써 이들의 복부돌출요인에 따라 의복구성에 고려해야 할 체형특성을 파악하고, 이를 일반 노년 여성과 비교분석하였다. 연구결과 복부비만 노인은 일반 노인보다 높이항목과 어깨너비 등 어깨관련항목을 제외한 두께, 둘레, 길이 항목에서 유의한 차이를 보이며, 로러지수와 버벡지수, 체간부의 편평률에서도 유의차를 보여 전체적 인 비만도가 높으며 체간부 형태가 원통형을 나타낸다. 또한 복부비만 노년 여성의 경우 상관관계 분석결과 엉덩이둘레보다 배둘레나 엉덩이외포둘레가 패턴 설계에 필요한 주요 항목들과 더 높은 선형적 상관성을 보이므로 패턴의 기준항목 설정시 이를 고려하여 제작하여야 할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.