• 제목/요약/키워드: Arithmetic Mean

검색결과 347건 처리시간 0.024초

검측 변수내 Random Noise 제거를 통한 연속류 돌발상황 자동감지알고리즘 개발 (Development of an AIDA(Automatic Incident Detection Algorithm) for Uninterrupted Flow By Diminishing the Random Noise Effect of Traffic Detector Variables)

  • 최종태;신치현;강승민
    • 한국ITS학회 논문지
    • /
    • 제11권2호
    • /
    • pp.29-38
    • /
    • 2012
  • 검지기 자료의 품질은 동일한 교통 조건이라도 검지기의 종류, 보정 및 유지 보수의 노력, 도로의 기하구조 등에 의해 내재적으로 10% 이상 변수 값 차이를 보일 수 있다. 이러한 내재적인 변수 값 차이로 인해 성능이 검증된 돌발상황 자동감지알고리즘을 사용하더라도 검지율(DR)이 낮아지고 오보율(FAR)이 높아지는 문제가 야기될 수 있다. 본 연구는 교통특성 변수의 간단한 산술계산기법(SAO)를 활용하여 새로운 AIDA를 개발하는데 목적이 있다. SAO는 내재적으로 존재하는 변수 값 차이를 보정하여 AIDA의 성능 저하를 극복하기 위해 개발되었다. AIDA 모형의 개발 및 검증을 위해 내부순환도로와 경부고속도로에서 수집된 30초 단위의 점유율을 사용하였다. SAO 기반 알고리즘 분석 결과 100% 돌발상황을 검지하는 높은 검지율을 보였고, 검지시간(MTTD)은 1분 이내로 나타났다. 오보율의 경우 본 연구에서 개발된 SAO 기반 AIDA의 오보율이 기개발된 AIDA의 오보율보다 3.5%~31.0% 감소하는 것을 확인하였다. SAO 기반의 알고리즘은 돌발상황의 지속성 분석에서도 탁월한 능력을 보였다.

Comparison of Effects of Hemoglobin Levels Upon Tumor Response among Cervical Carcinoma Patients Undergoing Accelerated Hyperfractionated Radiotherapy versus Cisplatin Chemoradiotherapy

  • Thakur, Priyanka;Seam, Rajeev Kumar;Gupta, Manoj Kumar;Rastogi, Madhup;Gupta, Manish;Bhattacharyya, Tapesh;Sharma, Mukesh;Revannasiddaiah, Swaroop
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권10호
    • /
    • pp.4285-4289
    • /
    • 2015
  • Purpose: Blood hemoglobin levels are known to influence response to radiotherapy. This retrospective analysis compared the effect of hemoglobin levels upon response to radiation among patients treated with radiation alone (by accelerated hyperfractionated radiotherapy) versus those treated with concurrent cisplatin chemoradiotherapy. Materials and Methods: Among patients treated for locally advanced carcinoma of the cervix (LACC) during 2009-10, a total of 60 fulfilled the eligibility criteria. In this time frame, external beam radiotherapy was delivered with either concurrent chemoradiotherapy (CRT, n=31) (45Gy over 25 fractions, with weekly cisplatin at 40mg/m2), or with accelerated hyperfractionated radiotherapy (AHRT, n=29) (20Gy over 10 daily fractions over the first two weeks, followed by 30Gy over 20 fractions over the next two weeks, with two fractions of 1.5Gy per day, without the use of chemotherapy). Mean weekly hemoglobin (MWH) levels of all patients were calculated as the arithmetic means of weekly recorded blood hemoglobin levels. As per MWH, patients in both of the AHRT or the CRT groups were classified into two subgroups-those with MWH between 10-10.9g/dL, or with MWH>11g/dL. Complete response (CR) to external beam RT phase (prior to brachytherapy) was declared after clinical examinations and computed tomography. The CR rate was noted for both MWH sub-groups within each of the AHRT and CRT groups. Results: Within the AHRT group, patients with MWH>11g/dL had a much better CR rate in comparison to those with MWH:10-10.9g/dL (80% vs. 21.1%) which was statistically significant (p 0.0045). Within the CRT group, there was no significant difference in the outcomes within the MWH>11g/dL and MWH:10-10.9g/dL sub-groups (CR rates of 80% vs. 61.9%, p=0.4285). Conclusions: The importance of maintaining a minimum hemoglobin level of 11g/dL during RT is much greater for patients treated with RT alone, than for patients treated with concurrent chemoradiotherapy. Enhanced haemoglobin levels during RT may to an extent negate the ill-effects that may otherwise arise due to non-use of concurrent chemotherapy.

삼각퍼지수를 활용한 학교숲 만족도 분석 (An Analysis of Satisfaction with School Forest Using Triangular Fuzzy Number)

  • 이슬기;장정선;정성관;유주한
    • 한국조경학회지
    • /
    • 제37권3호
    • /
    • pp.1-10
    • /
    • 2009
  • 학교숲은 도시숲의 유형중 하나이다. 도시학교는 적당한 거리에 적당한 면적을 유지하고 있어 학교숲의 조성은 도시에 많은 숲이 조성되는 효과를 준다. 또한, 학교는 학생들이 오랜 시간 머무르는 장소로 학생들의 환경교육의 장으로써의 역할을 수행할 수 있다. 그러나 현재 조성된 학교숲은 학생들의 요구나 참여가 배제된 채 결과 중심의 사업이 되고 있어 학생들의 환경교육에 큰 영향을 미치고 있지 못한 실정이다. 또한 설문조사를 바탕으로 분석하는 기존연구의 경우, 리커트척도를 활용하여 주관적 판단인 정성적 자료를 정량화 하였다는데 의의가 있으나, 인간의 주관적 판단은 모호한 경우가 많아 일반적으로 정량화하는데 문제가 있다. 이에 본 연구에서는 경상북도에 위치한 초등학교 학생들을 대상으로 학교숲에 대한 객관적인 만족도 평가를 위해 퍼지이론을 활용하여, 학교숲 만족도에 미치는 항목들을 알아보고자 하였다. 연구 결과, '학교 특색'과 '정서 함양' 항목의 산술평균값의 순위와 퍼지이론을 도입한 무게중심값의 순위가 변화됨을 알 수 있었다. 이는 퍼지이론이 인간의 사고와 같은 정성적 자료를 합리적으로 객관화 할 수 있다는 증거가 된다. 또한 학교숲 전체 만족도에 영향을 주는 요인은 '학교 특색' 항목의 회귀계수값이 0.159로 가장 높았으며, 다음으로 '수량 많음(0.142)', '자연 소중(0.136)', '정서 함양(0.120)'순으로 나타났다. 이 연구는 설문의 객관적 분석방법과 학교숲 조성을 위한 기초자료로 활용이 가능하리라 판단된다.

한국 확률강우량도 작성을 위한 수문학적 연구 (A Hydrological Study on Rainfall Frequency Atlas in Korea)

  • 이원환
    • 물과 미래
    • /
    • 제10권1호
    • /
    • pp.39-51
    • /
    • 1977
  • 본 연구는 기왕의 국내 전강우량 자료를 대상으로 관측기간, 관측지점 및 결측치의 보완등을 조회하여 최근 수문학 이론에 입각한 분석방법으로 한국확률강우량도를 작도한 연구내용이다. 기왕의 자료를 조회하여 이동평균법에 의한 편차의 백분율이 5% 이하에서 통계년수가 설정되는 연우량 및 최대이우량에 대하여 자료보유지점수가 103개 지점 및 100개 지점에 이르렀으며, 확률강우량도의 작도가 가능하였다. 그러나 장단시간(18시간미만) 우량자료보유지점수는 12개 지점에 불과하므로 작도상 무리하리라고 판단된 바 향후 10여년이 경과되어야 가능할 것으로 생각한다. 본 연구를 통하여 얻은 성과는 아래와 같다. 1) 이동평균법을 적용하여 산정한 통계년수로서는 모평균치에 대한 이동평균치의 극치편차의 백분율이 5% 정도라면 20년, 2%∼3%이면 30년으로 밝혀졌다. 2) 연우량 및 최대일우량 자료집단에 대하여는 통계년수 30년으로 확률강우량도 작성이 가능하였으며 18시간 미만의 우량자료집단은 1990년대에 이르러서 가능할 것으로 사료된다. 3) 확룰강우량 산정방법으로서는 필자의 Y∼k법을 적용함이 국내우량자료집단 해석이 간편하고 계산량이 훨씬 감 소되므로 적당할 것으로 생각된다. 4) 확률강우량도의 실질적인 활용도를 높이기 위하여는 확대도면의 작성과 보다 세분된 등우량선이 기입되어야 할 것이고 하루 속히 단시간 확률강우량도가 완성되어야 하리라고 생각한다.

  • PDF

퍼지-유전자 알고리즘을 이용한 결측 강우량의 보정 (Filling of Incomplete Rainfall Data Using Fuzzy-Genetic Algorithm)

  • 김도진;장대원;서병하;김형수
    • 한국습지학회지
    • /
    • 제7권4호
    • /
    • pp.97-107
    • /
    • 2005
  • 분포형 모형이 개발되어 지면서 이러한 유역의 공간적인 특성을 고려한 정확한 강우 자료와 조밀한 계측망의 요구는 더욱 커지고 있다. 그러나 현실적으로 조밀한 계측망에 의해 측정된 정확한 강우 자료를 얻기는 쉽지 않다. 일반적으로 강우관측소가 적정 밀도를 가지고 유역을 대표 하도록 설치되어 있으나 부족한 실정이고, 설치되어 있더라도 강우의 시 공간적 변동성을 반영하기가 쉽지 않다. 또한 여러 가지 이유로 결측이 되는 경우도 있다. 강우는 측정된 점 관측 자료를 이용해 유역의 평균 강우분포를 추정하게 된다. 따라서 결측 강우자료는 시간의 연속성 측면에서 그 보정이 반드시 필요하며 보정 후 강우자료의 공간적 분포를 산정할 수 있을 것이다. 본 연구에서는 결측 강우량의 보정을 위하여 퍼지-유전자 알고리즘을 이용하였는데 이 방법을 기존의 방법 즉, 산술평균법, 역거리법, 년정상강우량법, 거리-고도비율법과 비교하였다. 보정결과 기존의 방법은 실측의 70~80%의 정확도를 보였으나 퍼지-유전자 알고리즘은 90%정도의 정확도를 보였다. 특히, 민감도 분석 결과를 바탕으로 수평거리와 고도차에 대한 적정 차수를 제안하였다.

  • PDF

Surface Characteristics of Type II Anodized Ti-6Al-4V Alloy for Biomedical Applications

  • 이수원;정태곤;양재웅;정재영;박광민;정용훈
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2017년도 춘계학술대회 논문집
    • /
    • pp.77-77
    • /
    • 2017
  • Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

  • PDF

국내 업종별 결정형 유리규산 노출 평가 (Evaluation of Crystalline Silica Exposure Level by Industries in Korea)

  • 연동은;최상준
    • 한국산업보건학회지
    • /
    • 제27권4호
    • /
    • pp.398-422
    • /
    • 2017
  • Objectives: The major aim of this study is to construct the database of retrospective exposure assessment for crystalline silica through reviews of literatures in South Korea. Methods: Airborne concentrations of crystalline silica were collected using an academic information search engine, Research Information Service System(RISS), operated by the Korea Education & Research Information Service(KERIS). The key words used for the literature search were 'silica', 'crystalline silica', 'cristobalite', 'quartz' and 'tridymite'. A total number of 18 published documents with the information of crystalline silica level in air or bulk samples were selected and used to estimate retrospective exposures to crystalline silica. Weighted arithmetic mean(WAM) calculated across studies was summarized by industry type. Industries were classified according to Korea Standard Industrial Classification(KSIC) using information provided in the literature. Results: A total of 2,131 individual air sampling data measured from 1987 to 2012 were compiled. Compiled individual measurement data consisted of 827 respirable crystalline silica (RCS), 31 total crystalline silica(TCS), 24 crystalline silica(CS), 778 respirable dust(RD) and 471 total dust(TD). Most of RCS measurements(68.9%) were collected from 'cast of metals(KSIC 243)'. Comparing industry types, 'mining coal and lignite(KISC 051)' showed the highest WAM concentration of RCS, $0.14mg/m^3$, followed by $0.11mg/m^3$ of 'manufacture of other non-metallic mineral products(KSIC 239)', $0.108mg/m^3$ of 'manufacture of ceramic ware(KSIC 232)', $0.098mg/m^3$ of 'heavy construction(KSIC 412)' and $0.062mg/m^3$ of 'cast of metals(KSIC 243)'. In terms of crystalline silica contents in airborne dust, 'manufacture of other non-metallic mineral products(KSIC 239)' showed the highest value of 7.3%(wt/wt), followed by 6.8% of 'manufacture of ceramic ware(KSIC 232)', 5.8% of 'mining of iron ores(KSIC 061)', 4.9% of 'cast of metals(KSIC 243)' and 4.5% of 'heavy construction(KSIC 412)'. WAM concentrations of RCS had no consistent trends over time from 1994 ($0.26mg/m^3$) to 2012 ($0.12mg/m^3$). Conclusion: The data set related RCS exposure level by industries can be used to determine not only the possibility of retrospective exposure to RCS, but also to evaluate the level of quantitative retrospective exposure to RCS.

FET 센서 어레이를 이용한 이온 측정 시스템의 신뢰도 개선 (Reliability improvement of an ion-measuring system using FET sensor array)

  • 최정태;이승협;김영진;이영철;조병욱;손병기
    • 센서학회지
    • /
    • 제8권4호
    • /
    • pp.341-346
    • /
    • 1999
  • 일반적으로 FET형 전해질 이온 센서는 유리전극에 비하여 여러 가지 장점을 가지고 있으나 드리프트 및 기억효과가 있고 재현성이 부족한 단점을 가지고있어 이온 측정 시스템에 적용한 경우 전체적인 시스템의 신뢰성 저하를 가져온다. 이러한 점을 개선하기 위하여 본 논문에서는 8개의 동종 FET형 전해질 이온 센서 어레이를 사용하여 높은 신뢰성을 가지며 4종류의 이온($H^+$, $Na^+$, $K^+$, $Ca^{2+}$) 농도 측정이 가능한 시스템을 개발하였다. 개발된 측정 시스템은 전자식 스위치를 사용하여 단일의 신호 검출회로로 8개의 센서 신호를 검출하는 방법을 채택하였다. 또한 8개의 센서 신호를 삽입 정렬을 하여 신뢰성이 낮은 센서를 제외시키는 신호 처리 알고리즘을 개발하여 신뢰성을 향상시켰다. 제작된 시스템으로 3종류의 이온($H^+$, $Na^+$, $K^+$) 농도를 측정한 결과 개발된 신호처리 알고리즘은 여러 개의 센서 신호를 단순히 산술 평균을 취하는 방식에 비하여 오차의 범위를 더욱 줄일 수 있는 것으로 나타났으며, 기존의 단채널 방식의 전해질 이온 측정 시스템과 비교해볼 때 우수한 신뢰성을 가짐을 알 수 있었다.

  • PDF

일부 지역 중학생 대상 일품요리의 대표영양가 산출 및 영양적정성 평가 (Representative Nutrients Contents and Nutritional Adequacy Evaluation of Single-Dish Meal for Middle School Students)

  • 이지선;김영남
    • 대한지역사회영양학회지
    • /
    • 제23권2호
    • /
    • pp.93-101
    • /
    • 2018
  • Objectives: With the increasing number of single households and so-called Honbab-jok, those who eat alone, people tend to enjoy convenient and simple meals, such as single dish meals. This study was performed to provide data on the energy and nutrient content, and nutritional adequacy of single-dish meal. Methods: From the literature reviews, 61 types of single-dish meals were selected, and divided into 4 groups (steamed rice, noodle, porridge, and sandwich burger), and a further 11 sub-groups (bibimbab, fried rice, topped rice, rolled rice/ warm noodle, cold noodle, seasoned noodle, dukgook/ porridge/, and sandwich, burger). In addition, 382 junior high school students from Gyeonggi, Sejong, Jeonbuk, and Chungnam areas were recruited for the survey. The survey questionnaires were composed of the characteristics, preference, and intake frequency of single-dish meals. The representative energy content (arithmetic mean) of single-dish meals were calculated, and compared with the energy contents of preference and intake frequency-weighted values adjusted. The representative nutrient contents, energy contribution ratio, and INQ (index of nutritional quality) of a single-dish meal were calculated for a nutritional adequacy evaluation. Results: The study subjects considered a single-dish meal as tasty, simple and fast to prepare, inexpensive, nutritious, and no low calorie food. The preference scores of all but 1 sub-group of singledish meals were ${\geq}5.00$ (5.00~5.97), and 1 sub-group (porridge) was 4.67 on a 7-point scale. The intake frequency of 11 sub-groups were 0.31~1.71/week, porridge was the lowest at 0.31 and warm noodles was the highest at 1.71. Fried rice, rolled rice, and warm noodle' intake frequency were ${\geq}1/week$. The representative energy of steamed rice, noodle, sandwich burger were 443, 429, and 428 kcal, respectively, and that of porridge was 264 kcal. Less than 5% differences in the representative energy of 4 groups were observed when adjusted for the preference or intake frequency-weighted values. The energy contribution ratio of macro-nutrients calculations showed that porridge was a high carbohydrate and low fat food, whereas sandwich burger were high fat and low carbohydrate foods. The INQ of calcium and vitamin C were less than 1.0 in all 4 food groups, but the INQ of protein and thiamin were > 1.0 in all 4 single-dish food groups. Conclusions: The representative energy in the 4 groups of single-dish meal was 264~450 kcal, which is a rather low calorie meal, and the energy contribution ratio of macro-nutrients were inadequate. The protein and thiamin levels were sufficient but the calcium and vitamin C levels were insufficient in all 4 groups of a single-dish meal judged by the INQ. The additional intake of fruits and milk dairy products between meals with a single-dish meal, supply of calcium and vitamin C may increase, which will result in an improved nutritional balance.

큰느타리(Pleurotus eryngii) 품종 판별을 위한 초위성체 유래 다중 표지 개발 (Multiplex Simple Sequence Repeat (SSR) Markers Discriminating Pleurotus eryngii Cultivar)

  • 임착한;김경희;제희정;알리 아스자드;김민근;정완규;이상대;신현열;류재산
    • 한국균학회지
    • /
    • 제42권2호
    • /
    • pp.159-164
    • /
    • 2014
  • 큰느타리 품종구분을 위한 마커의 개발을 위하여 큰느타리 전체 유전자 염기서열을 바탕으로 제작한 484개의 SSR마커를 사용하여 다형성 분석을 실시하였다. 그 결과 각 275개의 primer에서 다형성이 관찰되었다. 이 중 품종간에 다양한 패턴을 나타내는 5개의 마커를 최종 선발하였다. 이들 마커의 PIC 값은 0.6627에서 0.6848로 나타났고, 평균값은 0.6775였다. 이 결과를 밴드 이미지 인식 방법으로 dendrogram을 작성하였다. UPGMA 집괴분석 결과, 큰느타리 품종은 크게 Cluster 1과 Cluster 2로 구분되었다. SSR primer를 이용한 PCR 결과 나타나는 품종별 고유의 DNA 밴드를 품종특이적 마커로 개발하기 위하여, 선발된 마커중에서 SSR312과 SSR366, SSR178과 SSR 277 마커를 조합하여 초위성체 유래 다중 표지 세트를 개발하였다. Multiplex-SSR 마커의 사용을 통해 두번의 PCR 반응만으로 본 연구에서 사용된 12개의 큰느타리 품종을 구분할 수 있었다.