• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.3
• /
• pp.161-167
• /
• 2004

Zone 3 of the distance relay is used to provide the remote back-up protection in case of the failure of the primary protection. However, the risk lot mal-operations under stressed conditions such as heavy loading, voltage and transient instability is usually high. Zone 3 is used in combination with the derivatives of the voltage, and current, etc to prevent mal-operations. Sometimes, the impedance characteristics that restrict the tripping area of relay are used to avoid the mal-operations due to load encroachment. This paper presents a novel Zone 3 scheme based on combining the steady-state components (i.e. 60Hz) and the transient components (TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operates correctly for the various events.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.171-179
• /
• 2011

In this paper, we deal with the vehicle routing problem that could establish operational plan of military engineer for survivability support of artillery position construction. We propose VRPTW(vehicle routing problem with time-window) model of special form that considered service level to reflect the characteristics of military operations rather than the logic of economic efficiencies in the objective function. Furthermore we suggest modified particle swarm optimization algorithm for service based vehicle routing problem solution that can be possible to search in complicated and uncertain area and control relation softly between global and local search.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.165-168
• /
• 2001

This paper presents a design of a divide unit supporting IEEE-754 floating point standard single-precision with 32-bit word length. Its functions have been verified with ALTERA MAX PLUS II tool. For a high-speed division operation, the radix-4 non-restoring algorithm has been applied and CLA(carry-look -ahead) adders has been used in order to improve the area efficiency and the speed of performance for the fraction division part. The prevention of the speed decrement of operations due to clocking has been achieved by taking advantage of combinational logic. A quotient select block which is very complicated and significant in the high-radix part was designed by using P-D plot in order to select the fast and accurate quotient. Also, we designed all division steps with Gate-level which visualize the operations and delay time.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.245-247
• /
• 2003

Zone 3 of the distance relay is used to provide the remote back-up protection in case of the failure of the primary protection. However, the risk for mal-operations under stressed conditions such as heavy loading, voltage and transient instability is usually high. Zone 3 is used in combination with the derivatives of the voltage, and current, etc to prevent mal-operations. Sometimes, the impedance characteristics that restrict the tripping area of relay are used to avoid the mal-operations due to load encroachment. This paper presents a novel zone 3 scheme based on combining the steady-state components(i.e. 60Hz) and the transient components(TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operates correctly for the various events.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.11-14
• /
• 1998

1. Introduction : Research progresses in Chemistry and Chemical Engineering have been made during the last decades with important contributions to the industrial development and to the quality of our life. An interesting case is related to the membrane science and technology continuous impact to innovative processes and products, particularly appropriate for a sustainable industrial growth. Membrane operations have been familiar for many years to biologists and chemists working in their laboratorier or studying biological phenomena. Only recently engineers started to operate in' this area. The preparation of asymmetric CA membranes at University of California, Los Angeles in the early 60s is generally recognized as a crucial moment for membranology (1). Loeb and Sourirajan with their discovery of how to increase significantly the permeability of polymeric membranes without significant changes in their selectivity, made realistic the possibility of their use in large scale operations for desalting brackish and sea water by reverse osmosis and for various other molecular separations in different industrial areas. Reverse osmosis is today a well recognized basic unit operations, togheter with ultrafiltration, crossflow microfiltration,. nanofiltration, all pressure driven membrane processes. Already in 1992 more than 4 milIions m$^3$/day were the total capacity of RO desalination plants and in 1995 more than 180.000 m$^2$ of ultrafiltration membranes were installed for the treatment of wheys and milk (2) (3).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.584-590
• /
• 2015

Objectives: The purpose of this study was to evaluate quartz concentrations in airborne total and respirable dusts. Materials: Respirable dust samples were collected using a 10 mm aluminum cyclone equipped with a 37 mm$5{\mu}m$ pore size PVC filter. Total dust samples were collected with a three stage cassette from three work sections at earthwork sites located in the South Chungcheong-do Province area. Results: The geometric means of quartz concentrations were $0.008mg/m^3$ and $0.004mg/m^3$ in total dust and respirable dust, respectively. The geometric means of quartz contents analyzed by FTIR were 3.74% in total dust and 3.16% in respirable dust. The geometric mean of quartz concentrations and contents in secondary blasting operations were higher than those in other operations. Conclusions: Given that secondary blasting operations had higher quartz concentrations, there is a need to reduce respirable dust, such as through wet operations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.313-319
• /
• 2019

Finite field operations have played an important role in error correcting codes and cryptosystems. Recently, the necessity of efficient computation processing is increasing for security in cyber physics systems. Therefore, efficient implementation of finite field arithmetics is more urgently needed. These operations include addition, multiplication, division and inversion. Addition is very simple and can be implemented with XOR operation. The others are somewhat more complicated than addition. Among these operations, multiplication is the most important, since time-consuming operations, such as exponentiation, division, and computing multiplicative inverse, can be performed through iterative multiplications. In this paper, we propose a multiplexer based parallel computation algorithm that performs Montgomery multiplication over finite field using redundant basis. Then we propose an efficient multiplexer based semi-systolic multiplier over finite field using redundant basis. The proposed multiplier has less area-time (AT) complexity than related multipliers. In detail, the AT complexity of the proposed multiplier is improved by approximately 19% and 65% compared to the multipliers of Kim-Han and Choi-Lee, respectively. Therefore, our multiplier is suitable for VLSI implementation and can be easily applied as the basic building block for various applications.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.17-22
• /
• 2015

In this paper, we study the calculation for the fracture area of the composite material specimens using digital image processing techniques. This study was able to calculate the area of the fracture region through the main operation step 7 on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

• Strategy21
• /
• s.32
• /
• pp.5-35
• /
• 2013

The purpose of this thesis is to suggest how to plan ROK(Republic of Korea) Navy's strategy concerning to JOAC(Joint Operation Access Concept) and ASB(Air-Sea Battle) concept of US(United States) armed forces. Since 2006, US armed forces has been developing CONOPS(Concepts of Operations), JOAC & ASB. These concepts will not only affect security environment for Korea Peninsula and West Pacific Area, but also will be affected to ROK Navy's Strategy. Therefore, Korea Navy has to consider and review those concepts and should discuss the way to secure peace of Korea Peninsula. JOAC & ASB have been developed for securing operational access ability of US armed forces against enemy forces. A2/AD(Anti-Access, Area-Denial) is the strategy of possible enemy forces against US forces' approaching into the operation area and impede operations within area. US forces had to overcome enemy's A2/AD strategy in coming century to protect national interest and sustain global leadership. The main concept of JOAC & ASB is "Cross-domain Synergy", which means 'to eliminate duplicate and improve joint operability containing space and cyber operation area.' Korea Navy's acceptance of JOAC & ASB without any revising is not a rational choice. Without the amendment some problems can be occurred by the Korea navy's acceptance for the original version of JOAC & ASB. Those are "Missing differences of operation environment between Korea and US", "Impediment from neighbor nations, especially PRC (People's Republic of China)", and "Impediment inside from Korea armed forces". Therefore, Korea Navy has to evaluate and find out the way to solve for JOAC & ASB to apply for their strategy and minimise those possible problems above. This thesis is expected to be the solution.