• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.5
• /
• pp.29-45
• /
• 2016

This study identified vulnerable regions in the national parks of the Republic of Korea (ROK). The potential vulnerable regions were defined as areas showing a decline in forest productivity, low resilience, and high sensitivity to climate variations. Those regions were analyzed with a regression model and trend analysis using the Enhanced Vegetation Index (EVI) data obtained from long-term observed Moderate Resolution Imaging Spectroradiometer (MODIS) and gridded meteorological data. Results showed the area with the highest vulnerability was Naejangsan National Park in the southern part of ROK where 32.5% ($26.0km^2$) of the total area was vulnerable. This result will be useful information for future conservation planning of forest ecosystem in ROK under environmental changes, especially climate change.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1052-1059
• /
• 2018

This paper deals with commutation failure of the line-commutated converter high voltage direct current (LCC HVDC) system caused by a three phase fault in the ac power system. An analytic calculation method is proposed to estimate the maximum permissible voltage drop at the LCC HVDC station on various operating point and to assess the area of vulnerability for commutation failure (AOV-CF) in the power system based on the residual phase voltage equation. The concept is extended to multi-infeed HVDC power system as the area of severity for simultaneous commutation failure (AOS-CF). In addition, this paper presents the implementation of a shunt compensator applying to the proposed method. An analysis and simulation have been performed with the IEEE 57 bus sample power system and the Jeju island power system in Korea.

• The Journal of Engineering Geology
• /
• v.10 no.1
• /
• pp.27-38
• /
• 2000

We hydrogeologically studied a mountainous area and its vulnerability to groundwater contamination. Groundwater flow and recharge occur mainly through a network of fractures in this areaTransmissivity and storativity obtained from slug, slug interference, and pumping tests range from 3.2$\times$10$^{-3}$ to 2.0$\times$10$^{-2}$$m^2$/min and 1.3$\times$10$^{-7}$ to 9.15$\times$10$^{-4}$, respectively. The groundwater was contaminated bylivestock activities in the upgradient. The groundwater in the downgradient residential area wasthreatened by the upgradient livestock activities.

• Journal of Climate Change Research
• /
• v.3 no.1
• /
• pp.51-69
• /
• 2012

This work aims to propose a vulnerability assessment methodology of ecosystem at present time, and an to suggest an adaptation strategy of ecosystem in the future for local government, in the fields of plant, animal and conservation area, which would occurred due to climate change. Vulnerability assessment in ecosystem includes first, tree growth and distribution part, mainly for conifers, secondly, insect part for pest and bee, and thirdly conservation area management part, especially at the national parks. To evaluate the degree of vulnerability of each substitute variables, such as exposure of climatic element, sensitivity, and adaptation ability, are respectively selected. Vulnerabilities of conifer growth and distribution, pest and bee, and national park management seem to be strongly influenced by the exposure of climatic element than other factors, such as sensitivity and adaptation ability. With time regional gaps of ecosystem vulnerability are expected to be greater in both conifers growth and distribution, and national park management, but reduced in pest and bee in 2100 in comparison with present time.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.217-228
• /
• 2019

In this study, a seismic vulnerability map of Gyeongju city, where the 9.12 Gyeongju earthquake occurred, was produced and evaluated using analytic hierarchy process(AHP) and geographic information system (GIS). Geotechnical, physical, social, structural, and capacity factors were selected as the main indicators and 18 sub-indicators to construct a spatial database. Weights derived using the AHP were applied to the 18 sub-indicators, which generated a vulnerability map of the five main indicators. After weighting the five generated maps, we created seismic vulnerability maps by overlaying each of the five maps. The seismic vulnerability map was classified into five zones, i.e., very high, high, moderate, low, and safe. For seismic vulnerability, the results indicated that 3% of Gyeongju area is characterized as having very high vulnerability, while 19% was characterized as safe. Based on district standards, Jungbu-dong, Hwangoh-dong, Hwangseong-dong, Seonggeon-dong, and Dongcheon-dong were high-risk areas, and Bodeok-dong, Gangdong-myeon, Yangbuk-myeon, Yangnam-myeon, and Oedong-eup were characterized as safe areas. The seismic vulnerability map produced in this study could possibly be used to minimize damage caused by earthquakes and could be used as a reference when establishing policies.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1682-1688
• /
• 2017

In modern society, the number of industrial customers using equipment sensitive particularly to voltage sags is rapidly increasing. As voltage sags can cause loss of information as well as false operation of the control device, it results in the vast economic damage in industrial processes. One way to mitigate voltage sags in the sensitive loads is the installation of distributed generation (DGs) on the periphery of these loads. In addition, renewable energy sources are currently in the spot light as the potential solution for the energy crisis and environmental issues. In particular, wind power generation which is connected to a grid is rising rapidly because it is energy efficient and also economically feasible compared to other renewable energy sources. On the basis of the above information, in this paper, with Wind Turbine Generators (WTGs) installed nearby the sensitive load, the analysis of the mitigating effect comparison by types of WTGs is performed using voltage sag assessment on the IEEE-30 bus test system. That is, the areas of vulnerability according to types of WTGs are expected to be different by how much reactive power is produced or consumed as WTG reactive power capability is related to the types of WTGs. Using the concept of 'Vulnerable area' with the failure rate for buses and lines, the annual number of voltage sags at the sensitive load with the installation of WTGs per type is studied. This research will be anticipated to be useful data when determining the interconnection of wind power generation in the power system with the consideration of voltage sags.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.295-304
• /
• 2020

The IPCC (Intergovernmental Panel on Climate Change) recommended the importance of preventive measures against extreme weather, and heat waves are one of the main themes for establishing preventive measures. In this study, we tried to analyze the heat vulnerable areas by considering not only spatial characteristics but also social characteristics. Energy consumption, popu lation density, normalized difference vegetation index, waterfront distance, solar radiation, and road distribution were examined as variables. Then, by selecting a suitable model, SLM (Spatial Lag Model), available variables were extracted. Then, based on the Fuzzy theory, the degree of vulnerability to heat waves was analyzed for each variable, and six variables were superimposed to finally derive the heat vulnerable area. The study site was selected as the Daegu area where the effects of the heat wave were high. In the case of vulnerable areas, it was confirmed that the existing urban areas are mainly distributed in Seogu, Namgu, and Dalseogu of Daegu, which are less affected by waterside and vegetation. It was confirmed that both spatial and social characteristics should be considered in policy support for reducing heat waves in Daegu.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.127-135
• /
• 2015

In recent years, meteorological disasters have frequently occurred in rural areas. As a result, there have been growing concerns over the protective measures needed. In order to avoid natural risks and damage, and to strengthen countermeasure to meteorological disasters, local governments needs to be prepared. Therefore, this paper seeks to prevent meteorological disasters through mapping of inundation vulnerability in agricultural land, Chungcheongnam-do. In doing so, this study were considered 5 variables (i.e. precipitation, region of altitude below 50m, region of slope gradient is below 10 degree, distance from river within less 50m) for creating vulnerability map. The precipitation was excluded in five variables. Since, the precipitation which include Daily maximum precipitation, 2-Daily maximum precipitation, summer precipitation was not any correlation among them. The results of analysing four variables, exclusive of precipitation, were showed that the agricultural lands where located in Dangjin, Buyeo, Hongseong and Asan were low correlation of inundation vulnerability by overlapping analysis. Moreover, The correlation analysis was showed low correlation between each factors and the annual average area of agricultural lands' inundation, whereas, the correlation analysis which was overlapping each factor showed high correlation. In conclusion, in order to create reliable vulnerability map in agricultural lands, Chungcheongnam-do, it must be considered to overlap analysis of the four main factors such region of altitude below 50m, region of slope gradient is below 10 degree, distance from river within less 50m. We suppose that this study's analysis can help to set the preparedness site of agricultural lands inundation.

• Structural Engineering and Mechanics
• /
• v.78 no.3
• /
• pp.351-368
• /
• 2021

This paper, by applying a reliability-based framework, develops seismic vulnerability macrozonation maps for Tehran, the capital and one of the most earthquake-vulnerable city of Iran. Seismic performance assessment of 3-, 4- and 5-story steel moment resisting frames (SMRFs), designed according to ASCE/SEI 41-17 and Iranian Code of Practice for Seismic Resistant Design of Buildings (2800 Standard), is investigated in terms of overall maximum inter-story drift ratio (MIDR) and unit repair cost ratio which is hereafter known as "damage ratio". To this end, Tehran city is first meshed into a network of 66 points to numerically locate low- to mid-rise SMRFs. Active faults around Tehran are next modeled explicitly. Two different combination of faults, based on available seismological data, are then developed to explore the impact of choosing a proper seismic scenario. In addition, soil effect is exclusively addressed. After building analytical models, reliability methods in combination with structure-specific probabilistic models are applied to predict demand and damage ratio of structures in a cost-effective paradigm. Due to capability of proposed methodology incorporating both aleatory and epistemic uncertainties explicitly, this framework which is centered on the regional demand and damage ratio estimation via structure-specific characteristics can efficiently pave the way for decision makers to find the most vulnerable area in a regional scale. This technical basis can also be adapted to any other structures which the demand and/or damage ratio prediction models are developed.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.677-693
• /
• 2013

IPCC showed that calculation of climate vulnerability index requires standardization process of various proxy variables for the estimation of climate exposure, sensitivity, and adaptive capacity. In this study, four different methodologies of standardization methods: Z-score, Rescaling, Ranking, and Distance to the reference country, are employed to evaluate climate vulnerability-VRI (Vulnerability-Resilience Indicator) over Korean peninsula, and the error ranges of VRI, arising from employing the different standardization are estimated. All of proxy variables are provided by CCGIS (Climate Change adaptation toolkit based on GIS) which hosts information on both past and current socio-economic data and climate and environmental IPCC SRES (A2, B1, A1B, A1T, A1FI, and A1 scenarios) climate data for the decades of 2000s, 2020s, 2050s, and 2100s. The results showed that Z-score and Rescaling methods showed statistically undistinguishable results with minor differences of spatial distribution, while Ranking and Distance to the reference country methods showed some possibility to lead the different ranking of VRI among South Korean provinces, depending on the local characteristics and reference province. The resultant VRIs calculated from different standardization methods showed Cronbach's alpha of more than 0.84, indicating that all of different methodologies were overall consistent. Similar horizontal distributions were shown with the same trends: VRI increases as province is close to the coastal region and/or it close toward lower latitude, and decreases as it is close to urbanization area. Other characteristics of the four different standardization are discussed in this study.