• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.4
• /
• pp.369-376
• /
• 2010

The purpose of this study is to reprocess Waste-LCD(Liquid Crystal Display), to widely increase specific surface-area by foaming agent in the process of reprocessing and to use as a substrate of water treatment which is increased the ability of biological treatment, as well as to control non-point source pollutants produced by surface run off during rainfall with using this substrate, and to improve water quality of public watershed as developing substrate for water treatment to be able to purify second treated water which is exhausted at the wastewater treatment plant. The average removal efficiency of Waste-LCD that using the foaming technology was SS 71.2%, BOD 55.7%, COD 58.4%, T-N 29.5% and T-P was 50.3%. Almost Media, early stage showed low removal efficiency of SS and BOD. However, it became high when the microorganism adhered the Media. The variation of SS removal efficiency was high by inflow concentration of SS. The reason for the Media 4 showed high SS removal efficiency is that it has wide specific surface-area, and also it has a pore. All in all, it shows floating matter treatment ability not only inside but it also works outside of the substrate.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.1
• /
• pp.23-32
• /
• 2003

The objective of this study is assessing water management efficiency using water withdrawals from rivers and water requirements for paddies. The water management efficiency was defined by the ratio of water requirements and water withdrawals. Water withdrawals were estimated using the operating times and pumping capacity of the pumping stations from 1992 to 1999 in the Han River and Nakdong River basins. Water requirements were estimated by adding the evapotranspiration of the crops and infiltrations in the irrigated area. Evapotranspiration from the paddies was calculated by the FAO modified Penman method with observed daily weather data. The monthly water management efficiency was analyzed for each pumping stations and the district offices of KARICO (Korea Agricultural and Rural Infrastructure Corporation). The efficiencies of 59 pumping stations in the Han River basin varied from 19% to 135%, and the average was 61%. The efficiencies of 146 pumping stations in the Nakdong River basin ranged from 17% to 190%, and the average was 72%. There were no good correlations between the water management efficiency and pump capacity or irrigated area, it showed that the water management efficiency was affected by the traditional water management practices rather than the scale of irrigation district.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.453-460
• /
• 2017

In order to investigate propulsion efficiency and cavitation characteristics for expanded area ratio variation of the 8800TEU class container propeller, a series of performance tests were conducted at Large Cavitation Tunnel (LCT) and Towing Tank (TT) in KRISO. The cavitation test of the existing propellers (KP1029 & KP1030) was conducted using FRP model ship in LCT. On the basis of LCT test results, it was required to design propeller with better propulsion efficiency and cavitation performance. Two propellers (KP1171 & KP1172) with decreased expanded area ratio were designed on the basis of KP1029 propeller. The new design propellers showed higher efficiency than KP1029 and reasonable cavitation performance. In the future, they will be applied as the standard propeller for the propeller design of the large container ship. Through the performance test and prediction results for the new design propellers, it is thought that high-load propeller with better propulsion efficiency and cavitation performance will be developed constantly.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.119-128
• /
• 2011

This paper introduces design space exploration of many-core processors that meet high performance and low power required by the beamforming algorithm of image signals of mobile ultrasound. For the design space exploration of the many-core processor, we mapped different number of ultrasound image data to each processing element of many-core, and then determined an optimal many-core processor architecture in terms of execution time, energy efficiency and area efficiency. Experimental results indicate that PE=4096 and 1024 provide the highest energy efficiency and area efficiency, respectively. In addition, PE=4096 achieves 46x and 10x better than TI DSP C6416, which is widely used for ultrasound image devices, in terms of energy efficiency and area efficiency, respectively.

• Journal of Biosystems Engineering
• /
• v.36 no.5
• /
• pp.348-354
• /
• 2011

Various crop spacing methods have been implemented so far for the greenhouse and plant factory applications. However, there is no generally accepted parameter for evaluation of plant spacing efficiency in plant production system. In this study, 'Planted Area Index' (PAI) of a spacing method is defined as the ratio of the planted area in the field to required planted area using the spacing method when no transplanting operation is assumed. Three common types of spacing methods for plane placement of the plants were modeled mathematically. For calculating the planted area, an optimal growth radius function (R(t)) is needed. Function of the days after transplanting stage gives a radius of an optimal circle area for the living plants. A computer simulation was developed to calculate the PAI, based on three crop spacing methods and four optimal growth radius functions. In general, the 1-D zigzag spacing showed the best PAI. Moreover, it gives an example on how to apply the PAI for the design.

• Current Photovoltaic Research
• /
• v.10 no.4
• /
• pp.111-115
• /
• 2022

For the high efficiency of the photovoltaic module, a high-output solar cell, which is the basis of photovoltaic power generation, is required. As the light receiving area of the solar cell increases, the light receiving area of the photovoltaic module also increases. Accordingly, recent trend is to use large-area solar cells such as M6 and M8 instead of M2-based solar cells for manufacturing the photovoltaic module and a study on the mechanical stiffness of the module with increased size is required. In this study, a mechanical load test corresponding to IEC-61215 was performed among the reliability tests of large-area photovoltaic modules. In order to confirm the degree to which the mechanical load test affects the photovoltaic module, the output and EL images were checked by sequentially increasing the pressure by 600 Pa at a pressure of 2400 Pa. Also, factors such as output and efficiency of large-area photovoltaic modules were verified through mechanical load testing of actual large-area photovoltaic modules and the rate of change was very small at 1%.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.71-80
• /
• 1995

The usual approach for desinging a fast multiplier involves finding a way to quickly add up all the partial products, based on parital product recoding scheme and carry-save addition. This paper describes theoretical medels for area and time complexities of Multibit Reconding Paralle Multiplier (MRPM), which is a generalization of the modified Booth recoding scheme. Based on the proposed models, time performance, hardware requirements and area-time efficiency are analyzed in order to determine optimal recoding size for very large scale integration (VLSI) realization of the MRPM. Some simulation results show that the MRPM with large multiplier and multiplicand size has optimal area-time efficiency at the recoding size of 4-bit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.5 no.1
• /
• pp.40-43
• /
• 1980

The Service area in AM Broadcast Changes according to its transmitting frequency. It is also reduced by increase of the citizen noise. As a result, the efficency of transmitting Antenna should be higer in a low noise region as long as AM Broadcast does not build up its transmitting power. The efficiency of transmitting Antenna can also function as a low resistance connection to earth. Most Vertical Antenna used in the AM standard Broadcast band in the Korea have extensive radial ground systems beneath them which serve as image plane.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.267-273
• /
• 2008

Energy efficiency and nutrient balance are good methods for environmental assessment of the environmentally-friendly agriculture. The objectives of this study were 1) to estimate the energy efficiency and nutrient balance of the organic rice farming, and 2) to suggest a solution to improvement the energy efficiency and nutrient balance. The set of estimation was performed at the organic rice farming area (8.9 ha) in Wanju-gun during the paddy cultivation period from 2006 to 2007. The organic farming complex consists of four weeding methods using 1) duck, 2) apple snail, 3) duck and apple snail and 4) hands and machinery. Results from this estimation should that the organic rice farming area was less efficient than conventional rice farming. The efficiency of organic farming area in 2006 was higher than in 2007. For the calculation of the nutrient balance, the N, P and K contents of input materials (cattle manure, milk vetch, mixed oilcake, rice bran, rice straw and barley straw) and output (farm products) were analysed. Annual environmental loads of N, $P_2O_5$ and $K_2O$ were estimated at 4.4 kg/10a, 13.8 kg/10a and 14.5 kg/10a, respectively. Cattle manure had the largest portion among the inputs items and nutrient concentration of cattle manure was high. Thus energy efficiency and nutrient balance depend on cattle manure input. Therefore it is necessary to control the manure input to improve the efficiency of organic rice farming.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.274-274
• /
• 2022