• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.785-789
• /
• 2007

본 연구에서는 태풍 및 집중호우로 발생되는 홍수류에 의해 많은 피해를 입을 수 있는 도시하천유역의 하천 제방 붕괴시 홍수범람모의를 실시하였다. 연구 대상 하천으로는 전주천유역을 선정하였으며, 전주천 하천 제방을 가상으로 붕괴시켜 홍수범람구역에서의 시간의 변화에 따라 침수양상 및 침수수위 등을 분석하고, 제방 붕괴에 의한 범람 진행시 하도내의 수위변화를 비교 분석하고자 하였다. 이에 따른 침수심도 및 홍수범람도를 SURFER와 연계하여 작성한 다음 기존의 홍수범람도 작성 방법 중 하나인 Arcview GIS를 이용하여 작성한 홍수범람도와 비교 검토하여 전처리과정이 비교적 간단하고 정밀도가 높은 침수심도 및 홍수범람도를 작성할 수 있는 방법을 제시하고자 하였다. 그 결과 시간의 변화에 따라 하도내에서 홍수범람구역으로의 월류량 및 침수수위, 침수수량 등의 결과를 얻을 수 있었다. 제방 붕괴로 인한 하도내 수위의 변화는 크지 않은 것으로 분석되었으며, Arcview GIS와 SURFER를 이용하여 작성한 홍수범람면적의 차이가 크지 않아 전처리과정이 복잡한 Arcview GIS보다 비교적 작성방법이 간단하고 정밀도가 높은 침수심도 및 홍수범람도를 동시에 작성할 수 있는 방법을 제시하였다.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2010

In this study, it has been intended to present the ways to improve some problems such as the difficulty of using the program which had got from the existing study, the computation and application of a lot of parameter and the complicated processing which need to be more simplified. Also It has been tried to bring up the ways to make a flood inundation map and a detailed inundation analysis which could reduce the risk factors. We selected an Anseong-Cheon basin, and wrote a flood inundation scenario based on extreme flood to exceed the planned frequency to consider only overflow and levee break and executed inundation simulation. Researchers conducted an analysis of overflow and levee break using function of HEC-RAS Storage with a One-Dimensional model. It applied Elevation versus Volume Curve for more correct inundation simulation than a method of Area-Time-Depth which used in popular. This study will suggest a mathematical method of SURFER with a little difference of inundation area more simplified and precise flood inundation than complicated Arcview 3.2a which used Query method of Arcview 3.2a.

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.27-34
• /
• 1998

Groundwater simulation model suing GIS and Arc/Info Gridfunctions were used to delineate wellhead protection areas. Groundwater simulation model was developed within Arcview GIS. The model. which integrates the data input and manipulation. Process simulation. and display of the results . was developed by considering time variations of the parameters. The model was applied to the EPA data. The hydraulic distributions from the EPA data and those calculated from groundwater simulation model agree well and zone of influence from EPA data and that calculated suing GRID functions seem to be consistent. The developed model may be an efficient tool to delineate WHPA because it integrates all the processes inside the GIS.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.31-35
• /
• 2000

We investigate the groundwater distribution and chemical characteristics for 3 or 5 districts every year and make the hydrogeologic map on a scale of 1:50,000. We draw the hydrogeologic digital map based on "The Handbook for the Drawing and Management of Hydrogeologic Map" which was published by MOCT and KOWACO in 1998. But, the Stiff diagram and well's notation are difficult to be presented in the digital map using the commercial Arcview GIS tools. So we develop the script file with Avenue language to represent them in Arcview GIS tool. At first, we design the database for the chemical analysis result of groundwater and well identification, and make the program code with Avenue language to display them on the digital map. And next we test the usefulness of the program code. As a result, we find that the script file is very useful for drawing the symbols and diagrams in hydrogeologic digital map using ArcView GIS.

• Spatial Information Research
• /
• v.12 no.1
• /
• pp.29-42
• /
• 2004

This Study was Analysis about Habitat of Eurasian otter Lutra lutra L. In October 2002 during September 2003, Otter Spraints and Sprainting site were searched in river Unkog of North-Kyongsang Province for taking the GPS coordinates. For Analysis of habitat, This data were used by Arcview ver. 3.2 with 1/25000 Topology Map and Other Field data. The result of Habitat Analysis meant that Habitat use was strongly related to Fish diversity and richness also vegetation and cover were connected with otter habitat. In other hand, The Human interferences including dense structures like House acted as factor of disturbance. This study suggest that The preceding about Suitable habitat having free of Human disturbance, abundant fish and good vegetation is essential In Trial for Conservation or Recovery of Otter like Trans-location.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.111-118
• /
• 2008

Riparian buffer zone prevents sediment entry into drainage channels or as a protection from runoff and wind erosion. However, Studies about its removing effect according to Riparian buffer zone are shorted now. In this study, using the SWAT model, Byongseong watershed is built on the Arcview GIS. Using the function of the filter strip in SWAT model, it is also examined about the variation of sediment yield. As a simulation result, the case of constructing riparian buffer zones at subbasins near the outlet shows generally high efficiency on removing sediment yield. In addition, according to the scenario analysis of changing riparian buffer zone width, it is thought that 5-10m riparian buffer zone width is the highest efficiency on removing sediment yields generated from Byeongseong watershed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.699-703
• /
• 2008

현재 홍수유출량을 산정하기 위해서 실무에선 각 하천마다 유출량에 대한 자료들이 부족한 실정으로 Clark 및 Snyder 등의 여러 가지 합성단위도법을 이용하여 홍수유출량을 추정하고 있는 실정이다. 이와 같이 합성단위도법을 이용하여 유출량 추정시 가장 중요시 되는 도달시간 및 저류상수 등의 매개변수를 산정하기 위하여 수자원분야에서도 GIS의 기법을 도입하여 대상유역의 수문학적 지형인자들을 추출하는 방법을 채택하고 있다. 이는 과거의 방법에 비하여 손쉽고 정확하며 신뢰성 있는 자료들을 제공하고 있지만 하천망 생성 및 유역분할 등을 생성하는 과정에서 각 적용시킨 모형마다 약간의 차이를 보이고 있는 실정이다. 따라서 본 연구에서는 각 방법들에 의해 추출되어지고 있는 지형인자들을 보다 정확하고 신뢰성 있는 수문학적 지형인자를 추출하고 이를 강우-유출모형에 적용시켜 자연하천유역의 홍수유출량을 추정하기 위하여 적절한 지형인자 추출 방법을 제시하고자 한다. 강우-유출 모의시 중요시되는 매개변수 산정을 위해 수자원종합관리시스템을 구현하기 위해 국내기술로 개발된 HyGIS 모형과 기존의 지형인자 추출 방법 중에 하나인 Arcview GIS 모형을 적용하여 분할된 소유역 및 격자크기별로 지형인자들을 추출하여 두 모형의 차이를 비교 분석하였으며 이를 토대로 매개변수 및 홍수유출량 추정에 미치는 영향을 분석 하였다. 추정된 유출량을 검증하기 위하여 실측된 유량자료로 개발된 수위-유량관계곡선식을 이용한 홍수량과 비교 검토하였다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1439-1441
• /
• 2003

The World Health Organisation has identified ‘Fluorosis’as a serious bone disease caused by groundwater. Though the fluoride content in groundwater is a natural phenomenon, when the permissible limit of fluoride is exceeded the consequences may be fatal. This study is identified areas of high fluoride content in the Dharmapuri district of India, which is one of the major districts severely affected by fluorosis (WHO). The approach to this problem is by using GIS as a tool to locate areas of high risk. Ground Water samples collected from 35 randomly located wells (open / bore wells) in the district were analysed for fluoride content. The results were compared with the standards of WHO (World Health Organisation ), ICMR (Indian Council of Medical Research ), BIS (Bureau of Indian Standard) and PHE (Public Health Engineering) and interpolated using IDW and spline methods using Arcview GIS 3.2 a. A computer based automated information system was developed in Arcview Avenue 3.2a, so as to enable the user to visit the risk areas at his desktop and to remediate measures as and when required.

• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.61-80
• /
• 1997

This study tried to propose the guidelines for the ecological preservation zoning in Korea. So some related laws and regulations were inspected, which were Natural Environment Preservation Act, Nature Park Act, Cultural Asset Conservation Act, Forest Act and Urban Planning Act. In these acts, I could find several concepts related to the ecosystem that are described as the protection area. But there aren't detailed and practical characteristics in those concepts. So for making the practical concept of ecosystem preservation, I considered Multiple Use Module, Wildlife habitat model, and Environmental evaluation model. Thorough this step, the process and methodology was established for evaluating and analysing. The potentiality of the GIS system was inspected. So the TM5 scene of the site was acquired and processed by ER-Mapper, Idrisi, Arc/Info and Arcview. And several digitized data were input by scanning and vecterizing. The Erdas format was mostly exchangeable to any program. The site is the Byonsan Peninsula National Park. The forest stand information and topographic data were digitized, types of which are forest year, DBH, density, slope, aspect etc. And also the watershed boundary, roads and paths, natural and cultural resources were mapped and analysed. Modelling of preservation suitability found the dispersed patterns for the best suitable zone through all the site. And the development potential areas were checked on downwatershed. This patterns are thought to result from the forest location for the wildlife habitat and the low altitude and no-steep slopes for developing. And Early warning system concept was introduced by overlapping these two patterns on the both potential area. As the conclusions, I proposed that the preservation zone be assigned according to the watershed unit as the main ecosystem zone. This main area should be linked by the eco-corridor through the point type eco-system. Finally, I thought the comprehensive information system should be established for making the rational and efficient decision making in natural area.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.169-184
• /
• 2000

Industrial clusters and their boundaries are identified by factor and hot spot analyses for the greater Cincinnati metropolitan area in USA. While traditional input-output approach identified aspatial industrial clusters, this study combines traditional approach with GIS techniques to identify their boundaries. Combining the results of input-output industrial clusters with the leading industries groups, we have identified five leading industry clusters. They are food (20), chemicals (28), metal manufacturing (32), metal products (33), and machinery (35). We also used hot spot analysis to visualize each industry cluster on the research area by using Arcview software. Determining the degree to which such industries are associated spatially and their spatial delimitation may be an additional approach to measuring the efficiency of the spatial organization of an economy. It is hoped that the industrial clusters and industrial spatial clusters approaches may also proved the basis for the development of new models of the spatial arrangement of industry at a level more aggregated than that of the single plant or firm.