• International Journal of Concrete Structures and Materials
• /
• v.6 no.2
• /
• pp.123-134
• /
• 2012

There is significant concern in the engineering community regarding the safety and effectiveness of fiber-reinforced polymer (FRP) strengthening of RC structures because of the potential for brittle debonding failures. In this paper, previous research programs conducted by other researchers were reviewed in terms of the debonding failure of FRP laminates externally attached to concrete. This review article also discusses the influences on bond strength and failure modes as well as the existing experimental research and developed equations. Based on the review, several important conclusions were re-emphasized, including the finding that the bond transfer strength is proportional to the concrete compressive strength; that there is a certain bond development length that has to be exceeded; and that thinner adhesive layers in fact lower the chances of a concrete-adhesive interface failure. It is also found that there exist uncertainty and inaccuracy in the available models when compared with the experimental data and inconsistency among the models. This demonstrates the need for continuing research and compilation of data on the topic of FRP's bond strength.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2014

The SC structure can have relatively liberal sectional surfaces, and allows modularization for pre-forming in factories and structural stability. It can be used for the shear walls in the core of general buildings or the structural members for parking buildings. In the future, it could be applied to moving large bus terminals, and widely used for general industrial structures as it can expedite the process compared to other methods. This study examined the applicability of SC structures to the retaining walls of a parking building and reviewed its economic value by comparing its construction term, quality control benefits, and cost compared to RC structures. It was found that SC structures are about 1.6-1.7 times more expensive than RC structures in terms of the cost of fabrication and installation. However, the construction term can be reduced by 27% to save indirect costs for constructors, as well as the cost of removing molds and material loss required when installing RC structures.

• Journal of architectural history
• /
• v.24 no.6
• /
• pp.7-19
• /
• 2015

'Griffis Collection' is a collection of photographs of Japan and Korea in modern era, collected by William Elliot Griffis. Originally Mr. Griffis was studying about Japan when he developed an interest on Korea, and started to collect helpful materials he could find to study. Later days of Griffis' life, he donated his research to Rutgers University Library, and those materials were named and preserved as Griffis Collection. This paper is about photographs that illustrate modern Incheon and Hansung, and study them in order to discover how Korea's modern cities and architecture were formed and built. In total, there is four categorized chapters of photographs, and those are cities, public buildings, educational facilities and private buildings. In Griffis Collection, there are 23 photos those are relate to this paper's subject, but only 19 of them that has historic value has been covered in this paper. In results, all 19 photos were proved that they have significant information in terms of historic research of modern Korea and Korea's modern architectural stages.

• International Journal of Concrete Structures and Materials
• /
• v.5 no.2
• /
• pp.87-96
• /
• 2011

Many studies have been performed on steel fiber-reinforced normal/high-strength concrete (SFRC, SFRHC) for years, which is to improve some of the weak material properties of concrete. Most of equations for material strengths of SFRHC, however, were proposed based on relatively limited test results. In this research, therefore, the material test results of SFR(H)C were extensively collected from literature, and material tests have conducted on SFR(H)C; compressive strength tests, splitting tensile tests, and modulus of rupture tests. Based on the extensive test data obtained from previous studies and this research, a database of SFR(H)C material strengths has been established, and improved equations for material strengths of SFR(H)C were also proposed. Test results showed that both the splitting tensile strength and the modulus of rupture of SFR(H)C increased as the volume fraction of steel fiber increased, while the effect of the steel fiber volume fraction on the compressive strength of SFR(H)C were not clearly observed. The proposed equations for the splitting tensile strength and the modulus of rupture of SFR(H)C showed better results than the previous equations examined in this study in terms of not only accuracy but also safety/reliability.

• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.12-20
• /
• 2009

Memory and schema are very similar in terms of human accumulated mental and physical experiences. However, while memory has more personal aspect, schema discussed in this paper has more collective aspect. Schema has been developed through different generations and times, and has become a specific psychological or visual element(s) that can be applied to various fields, such as all, design and architecture. This study focuses on Aldo Rossi's architectural design characteristics based on his 'Autobiographical Concept' as well as personal schema. 'Autobiographical Concept' is the crucial structure supporting Aldo Rossi's distinctive formalization and spatialization. 4 case projects were comparatively analyzed by the 5 elements included in 'Autobiographical Concept'. It was not easy to relate each element to a specific design aspect because the 5 elements are somehow theoretically and conceptually inter-connected each other. Even though it is very difficult to directly relate a conceptual element with a real spatial element, it is found that the 5 elements have some differences in the spatialization process. Thus, in the conclusion, this study attempted to show the unique characteristics of the Aldo Rossi's architectural design process based on his 'Autobiographical Concept'.

• Architectural research
• /
• v.17 no.4
• /
• pp.117-126
• /
• 2015

University residence halls have become one of the most important issues for students when selecting their academic institutions. However, in South Korea, while universities maintain technologically up-to-date facilities, when it comes to safety or security, the management is unsatisfactory. As a result, the number of violent crime has been increasing. However, there are few researches in terms of practical validity of CPTED Guidelines even though a myriad of researchers study about CPTED Guidelines. Therefore, this study endeavours to investigate the validity of theoretical CPTED Guidelines that to what extent it might be adopted for design process. As a methodology, Space Syntax Convex map and Visibility Graph Analysis (VGA) are chosen. As a result, since the types of space which have a high level of Space Syntax Index are analogous with space treated on CPTED Guidelines, it roughly shows that the theoretical CPTED Guidelines could be adopted in practical architectural design process. Furthermore, it reveals that there is a close relationship between detail design guide stated in CPTED Guidelines and the result of VGA. That is, through the analysis, it is proved that the validity of CPTED Guidelines is quite enough to be adopted in practical design process.

• Architectural research
• /
• v.16 no.2
• /
• pp.45-56
• /
• 2014

The objective of this article, positively recognizing existing researches, is to revisit some aspects regarding the Vāstupuruṣamaṇḍala with a square grid work which is a fundamental planning guideline to control the construction of a Hindu temple and a mathematical doctrine to lead ritual programs. Hence, this paper suggests some reservations as to certain details such as temple constructions. In order to lay hold on its meaning, this paper touches upon the specific matters about the Vāstupuruṣamaṇḍala in the building construction of Hindu temples, which set out to shed light on four concerns; first, it explores the formation process of the Vāstupuruṣamaṇḍala in concert with the evolution of Hindu temples over time; second, it considers differences and similarities in comparison with other texts intimately articulated with the construction of temples, and then understands the relationship between their local languages and applications to the Vāstupuruṣamaṇḍala; third, it examines the symbolic and sanctified process of the temple's construction on the Vāstupuruṣamaṇḍala grids with two- or three-dimensional computer graphics (by means of the Auto Cad and Rhino tools), invisibly situating the divinities within it and illuminating the roles of ornamentation in the structural terms of temples; fourth, it presents that there are another rules on the building construction based upon architect-priest's craftsmanship skilled as a stonemason or a carpenter in the manual processes of the temples' construction for proper measurements and truncations of stone and wood closely linked together structural stability of completed temples. In conclusion, proceeding from what has been said above, this thesis shows that the Vāstupuruṣamaṇḍala grid includes both practical and spiritual meanings to construct a Hindu temple.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.45-53
• /
• 2013

For the target goal of Zero-energy House construction in 2025, the government announced that the insulation regulations will be continuously enhanced. It has been predicted that high-performance insulation materials, such as vacuum insulation panel (VIP), should be used to decrease the thickness of outer walls. The aim of this study was to evaluate the performance of adhesively fixed external insulation and finish system (EIFS) with VIP. The energy performance of a base model with conventional internal insulation system and three alternatives of EIFS with VIP were analyzed by three-dimensional heat transfer simulation. Construction cost and convenience of each alternative were also evaluated and compared. As results, effective alternatives in terms of each performance as well as overall performance considering the weighting factors of each performance were suggested.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2020

In the era of the Fourth Industrial Revolution, Various attempts are being made to converge new industries with IT industry to find new growth engines in the field of IT, maximizing efficiency in terms of productivity. 3D printers are also related to this, and various studies have been conducted worldwide to utilize them in the construction industry. At present, there is an active effort to study atypical structures using 3D printers. The most widely used method is the use of glass panels, however, the additional cost of the manufacturing process and thus the overall project cost cannot be ignored. In addition, the construction of the curvature of the existing two-way curved surface in the conventional flat joint method is not suitable for implementing an amorphous shape. In this paper, we propose an optimized shape through Abaqus analysis of various shapes of Space Truss interior using 3D printing technology using polymer.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.1
• /
• pp.47-56
• /
• 2013

As architecture has a role of vessel that contains human life, architecture of museums in a region must be a vessel that contains identity of the region. Jeju Province possesses excellent natural landscape acknowledged by the world. As such, architectural design of museums in Jeju region, differentiated in terms of natural, humanistic and cultural characteristics from other regions, must include identity of Jeju. Jeju has established and is operating so many museums with different themes that it is referred to as the heaven of museums. In addition, museums as cultural facilities must be the measure of cultural level representing regional identity and perform the role of advance guard that leads architectural culture of the region. Also, such excellent architectural asset is an important landscape element that increases value of the region. Based on Landscape Management Guideline established in 2009 by Jeju Special Self-governing Province under such critical mind, this study will support design problems and improvements of museums through case study and analysis on design characteristics of national and private museums in Jeju. Accordingly, the purpose of this study is to provide basic data to be pursued by future museums that contain identity of Jeju, based upon the results of analysis described above.