• 한국지반공학회논문집
• /
• 제23권10호
• /
• pp.97-107
• /
• 2007

대규모 암반비탈면은 소규모 암반비탈면과 달리 파괴블록의 크기를 사면전체로 가정했을 경우 비합리적인 안정성 평가가 이루어질 가능성이 매우 크다. 즉, 파괴블록의 크기에 따라서 안전율, 절리면 강도정수 등이 변하기 때문에 대규모 비탈면의 경우에는 공학적인 방법으로 파괴 가능 블록크기 평가가 필요하다. 따라서 본 연구에서는 연구대상 부지의 절리조사자료를 이용하여 절리의 방향성(joint orientation) 및 절리간격(joint spacing) 통계분석, 3차원 절리발생 강도(joint intensity)분석 등의 과정을 거쳐 3차원 절리계를 생성한 후, 이를 이용하여 파괴가능 블록(failure block) 크기를 분석하였다. 분석결과 파괴유발이 우려되는 블록은 33개가 관찰되었으며, 최소크기 1.4m, 최대크기 38.7m, 평균크기 15.2m로 나타났다. 또한, 3차원 절리계 생성과정에서 발생되는 절리자료를 활용하여 확률론적해석, 2, 3차원 불연속체해석 등에 직접적으로 활용할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.280-283
• /
• 2007

The first grid-connected, building-integrated transparent amorphous silicon photovoltaic installation has been operated since October 2004 in Yongin, Korea. The 2.2kWp transparent PV system was applied to the facade of entrance hall in newly constructed KOLON E&C R&D building. The PV module is a nominal 0.98m ${\times}$ 0.95m, 10% transparent, laminated, amorphous(a-Si) thin-film device rated at 44 Wp per module. To demonstrate the architectural features of thin film PV technologies for daylighting application, transparent PV modules are attached to the building envelope with the form of single glazed window and special point glazing(SPG) frames. Besides power generation, the 10% transmittance of a-Si PV module provides very smooth natural daylight to the entrance hall without any special shading devices for whole year. The installation is fully instrumented and is continuously monitored in order to allow the performance assessment of amorphous silicon PV operating at the prevailing conditions. This paper presents measured power performance data from the first 12 months of operation. For the first year, annual average system specific yield was just 486.4kWh/kWp/year which is almost half of typical amorphous silicon PV output under the best angle and orientation. It should be caused by building orientation and self-shading of adjacent mass. Besides annual power output, various statistical analysis was performed to identify the characteristics of transparent thin film PV system.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.43-50
• /
• 2010

Natural lighting is directly connected with our mental and physical health. For working or learning effect, the proper natural lighting is required for improving our living conditions. School facilities, especially, are the place where includes students' ordinary activities with learning behaviors during the school years from elementary to high school. This study was carried out for the purpose introducing a basic database in that planning a school by researching on the actual in the natural lighting system of some schools' classroom, estimating, and analyzing through a simulation, which resulted in a method of improving the natural lighting system. As a result of measuring and analyzing Daylight Factor(DF) during the time from 9 am to 3 pm when students are activating in their classroom, generally DF range of the sides near to window and aisle seats zone are not distributed well. Besides, two out of four school which are researched would not reach the standards of the law for school sanitary while rest of the schools meet the standards; Average DF 5% and Minimum DF 2%. And the result of a simulation by RADIANCE program shows the most appropriate DF range when it is applied in variable numbers about an oriehows the- South-east 15, south-east 30, south-east 45, south-west 15, south-west 30, and south-west 45 degrees. When it is applied in the variable numbers about glass transmittance - 60%, 70%, and 80% in condition facing south of a classroom, the result shows that the DF range of 80% transmittance is relatively higher than other glasses in the classroom. Thus, when a school is built, plans for an orientation is necessary for improve of elementary schools' environment with the glass installation which is made for high transmittance and is regarded with the students' activities time.

• 한국측량학회지
• /
• 제32권3호
• /
• pp.191-204
• /
• 2014

In recent years, multi-camera systems have been recognized as an affordable alternative for the collection of 3D spatial data from physical surfaces. The collected data can be applied for different mapping(e.g., mobile mapping and mapping inaccessible locations)or metrology applications (e.g., industrial, biomedical, and architectural). In order to fully exploit the potential accuracy of these systems and ensure successful manipulation of the involved cameras, a careful system calibration should be performed prior to the data collection procedure. The calibration of a multi-camera system is accomplished when the individual cameras are calibrated and the geometric relationships among the different system components are defined. In this paper, a new single-step approach is introduced for the calibration of a multi-camera system (i.e., individual camera calibration and estimation of the lever-arm and boresight angles among the system components). In this approach, one of the cameras is set as the reference camera and the system mounting parameters are defined relative to that reference camera. The proposed approach is easy to implement and computationally efficient. The major advantage of this method, when compared to available multi-camera system calibration approaches, is the flexibility of being applied for either directly or indirectly geo-referenced multi-camera systems. The feasibility of the proposed approach is verified through experimental results using real data collected by a newly-developed indirectly geo-referenced multi-camera system.

• 한국실내디자인학회논문집
• /
• 제20권6호
• /
• pp.161-172
• /
• 2011

Although the term royal floors is broadly used in high-rise housing, it is hard to find any clear scholarly definition of this term or any in-depth study exploring people's perceptions of it. This study reviewed ongoing discussions about concepts and definitions regarding royal floors, collected opinions from high-rise housing residents and realtors about the term, and compared the opinions of these two groups. First, the statistically analyzed results verified five main factors affecting people's perceptions of royal floors: locational characteristics (i.e., daylight, view, orientation), 2) price characteristics (i.e., premium, price increase level, number of houses on urgent sale), 3) best location of apartment building (i.e., location within a neighborhood, unit size), 4) architectural characteristics of apartment complex (i.e., size of complex, housing type, size options of units), and 5) personal characteristics of respondents (i.e., personal concepts of the meaning of housing, lifestyles). Results from the analysis showed that realtors perceived strong relationships between royal floors and 1) locational and 2) price characteristic factors, while residents perceived strong relationships between royal floors and personal preference as well as three factors from the five identified above: 1) locational, 2) price, and 4) architectural characteristics. Third, in defining royal floors in a building, the past rule of 1/4 is no longer effective. Instead, the rule of 1/n has become more prevalent (i.e., 1/6 to 1/8). Fourth, royal floors can be defined as the 15th to 25th floors in a 30-story high-rise housing structure based on the agreement of 50% of residents and 70% of realtors.

• 건축역사연구
• /
• 제10권3호
• /
• pp.25-43
• /
• 2001

The purpose of this study is to investigate the meaning of letter-shaped house plan of the Imchongak in Andong and to Analyze its housing principles. The letter-shaped house plan of the Imchongak lays its root in the traditional Eastern thoughts, showing feature of Taolsm. The Imchongak applied the principles of a good land and a good house, which are originated from the Yonyang theory, Five elements theory, Poongsochiri, housing principles and letter shapes of good fortune. The letter shape of the Imchongak is 用(as below), and 日, 月, and 明 are contained in it. The lette 明means brightening the mind and life of human being by himself. The letter 用 is shaped to express the idea of Cheayong Theory of Confucianism, which refer to everlasting interaction of all thing in the universe. In applying the housing principles, Potaebob was used for the orientation of the house. Samhabbob, Jungeomjungyangbob and Dongsusataecbob were utilized to locate the gate. In addition, Dongsusataecbob was used for the positioning of rooms in most cases. The Imchongak succeeded traditional Eastern thoughts and it realized the concept and philosophical idea of Confucianism as a house. What is importan in the house plan of the Imchongak is that it repesents the ideal of Confucians in Chosun Dyansty that the man, house, nature, and universe are one. It also advocates ideology of Confucianism which emphasizes that a human life can be completed when man live together with the nature and harmonize themselves with it.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.685-692
• /
• 2007

낮은 전단벽과 같이 전단력에 의하여 지배 받는 철근콘크리트 부재의 경우, 전단력은 부재의 응력-변형률 이력곡선에서 핀칭 효과에 영향을 미친다. 그러나 최근의 연구에 따르면 철근의 배근 방향이 주응력 방향과 일치할 경우 철근콘크리트 부재의 응력-변형률 이력곡선에서 핀칭 효과가 없어지는 것으로 나타났다. 본 연구에서는 철근콘크리트 부재의 응력-변형률 이력곡선에서 핀칭 효과의 발생 유무를 변형률의 적합 조건을 고려한 트러스 모델을 이용하여 이론적으로 설명하였다. 해석 결과는 철근콘크리트 부재의 핀칭 효과가 철근의 배근 방향에 큰 영향을 받는 것을 보여준다. 또한 에너지소산 성능은 외력의 주응력 방향과 철근의 배근 방향 사이의 각도 차이에 따라 선형적으로 증가하지 않았다.

• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.13-22
• /
• 2018

The purpose of this study was to consider the energy generation of the building as well as the energy demand of the building in terms of zero energy building design. The reason why the zero energy building viewpoint should be discussed is that direction of the building, heat transfer rate of the building, and the S/V ratio of the building are variables related to energy demand and solar panels installed on the building roof and building envelope are variables related to energy generation. This study proceeded as follows; Firstly, the simulation model of large office and elementary school has the same mutual volume and total floor area, and the each floor area and number of floors are adjusted so that the S/V ratio is different. To the next, the energy demand and energy generation of the simulation model were derived based on the meteorological data of Seoul, Daejeon, Busan. Finally, energy demand, energy generation, and final energy demand were compared with heat transfer rate, S/V ratio, building type, region, and orientation. The results of this study is that consideration of solar power generation in terms of energy generation should be taken into consideration at the same time in consideration of the heat transfer rate, the shape, the region and the direction of the zero energy building design.

• 대한건축학회논문집:계획계
• /
• 제35권9호
• /
• pp.65-75
• /
• 2019

This study aims at analyzing the therapeutic design characteristics implemented in the indoor atriums of the outpatient areas in four children's hospitals in London and San Francisco. A mixed-method approach was used to examine the spatial configurations and design elements in the atriums, while a literature review was conducted to understand the therapeutic design characteristics relevant to atrium spaces and children's healthcare facilities. The spatial design and the pattern of use of the atrium in each hospital were studied during field visits and interviews with the hospital management staff. Based on the literature review and the observations from the field study, a Visibility Graphic Analysis was chosen to examine the visibility, accessibility, and intelligibility of the spatial configurations in the atriums of each hospital. In addition, the openness, restfulness, and vibrant ambience of the design elements in the atriums of each hospital were investigated by surveying fifty-two design professionals on the quality of the design elements in the atriums. A spatial configuration analysis, confirmed that all the atrium spaces had high visibility, accessibility, and intelligibility due to their high connectivity, integration, intelligibility, and because the atriums were laid out in the open lobby space, along the major circulation axis, or in the circulation intersection. In the survey of the design element evaluation, all atriums proved to be appropriate in terms of openness, while the adequacy of restfulness and vibrant ambience differed depending on the hospitals. Notably, location and orientation, access, natural light, outdoor view, and play facilities were found significant environmental design elements determining the successful implementation of the therapeutic design in the atriums. The observations from the aforementioned are further discussed to enhance the therapeutic design quality of atrium spaces in children's hospitals.

• Steel and Composite Structures
• /
• 제19권1호
• /
• pp.153-171
• /
• 2015

Twelve large-scale composite deck slabs were instrumented and tested in a cantilever diaphragm configuration to assess the effect of fibers and welded wire mesh (WWM) on the in-plane shear capacity of composite deck slabs. The slabs were constructed with reentrant decking profile and reinforced with different types and dosages of secondary reinforcements: Conventional welded wire mesh (A142 and A98); synthetic macro-fibers (dosages of $3kg/m^3$ and $5.3kg/m^3$); and hooked-end steel fibers with a dosage of $15kg/m^3$. The deck orientation relative to the main beam (strong and weak) was also considered in this study. Fibers and WWM were found efficient in distributing the applied load to the whole matrix, inducing multiple cracking, thereby enhancing the strength and ductility of composite deck slabs. The test results indicate that fibers increased the slab's ultimate in-plane shear capacity by up to 29% and 50% in the strong and weak directions, respectively. WWM increased the ultimate in-plane shear capacity by up to 19% in the strong direction and 9% in the weak direction. The results suggest that discrete fibers can provide comparable diaphragm behavior as that with the conventional WWM.