• Journal of the Korean housing association
• /
• v.7 no.1
• /
• pp.117-126
• /
• 1996

The purpose of this paper is to develop formal design principles towards flexible house plan. A flexible house plan accomodates spatial requirements corresponding to change of life style and provides a way of saving architectural materials. Design properties as a basis for manipulation of room includes adjacency, orientation and geometrical information which are suited well to flexible design. This paper has developed a formal grammar of shape which can be utilized to transform house plan. Flexible design presented here is based on the idea of various operations of the shape grammar. The shape grammar, as a set of rules, specifies manipulations of shapes for reorganization of spatial relationships of rooms in a house plan. It lists exemplary rules in control knowledge which guides design processes for modifying a plan. An example taken from house plan design is used to ilustrate important aspects of the flexible design which fundamentally provides the basis for architectural material saving.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.11
• /
• pp.35-42
• /
• 2019

The purpose of this study was to study social housing and incubating module planning for the urban regeneration in the deteriorated residential areas. The site of this study is Gwange-ro Gwangmyeong 3-dong, where old residential areas are concentrated, and there are problems in the decreasing number of young people and the aging population and elderly population. In this study, the necessity of supporting housing according to local characteristics and various programs and facilities are proposed, and various alternatives of modular housing are derived. As a result, it proposed verification of local regeneration and activation and orientation of social housing and local regeneration programs using modularity in the future.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.3
• /
• pp.29-36
• /
• 2018

In this study, the moisture contents of four Hanoks have been monitored and the results were analyzed. Murujeong and Ongojae were built by traditional construction method and material, and Jeeshinjae and Hwakyeongdang were built by modernized construction method and material. Hwakyeongdang was monitored about 2 years and 9 months and the other three Hanoks were monitored about 4 years and 2 months. The surface moisture contents were measured by the non-destructive electronic resistant type moisture content meter. The measured moisture contents were affected by the orientation to the sun, wood type, temperature and relative humidity. The columns on the northern side and lumber showed more moisture contents than those of the southern side and glue-laminated wood. The moisture contents and relative humidity showed proportional relationship. The moisture contents of all four monitored Hanoks existed proper range by and large.

• Journal of architectural history
• /
• v.14 no.3 s.43
• /
• pp.7-21
• /
• 2005

This paper is an attempt to find/make an entrance to John Hejduk's architecture. Based explicitly on both Karl Popper's model of knowledge production called 'conjecture and refutation' and Harold Bloom's theory of poetry called 'revisionism', this paper, in order to produce a new problem, mainly deals with an existing knowledge as an object to refute, that is, Michael Hays' interpretation of Wall House by Jacques Lacan's notion of the gaze, Hejduk's a pivotal architectural finding. The arguments underlying this paper are two: First, Hejduk, just like this paper, follows Popper's model and Bloom's theory in conducting his own architectural research. Secondly, he takes what might be called artist's attitude when absorbing previous knowledge and producing new one. These two arguments are made in the first part and then served as a basic propositions for further arguments. In the process of criticizing the way in which Hays explicates Hejduk's Wall House, this paper reaches two main arguments. First, Lacan's notion of the gaze is not proper specifically for the explication of it. However, it may be useful and even promising when dealing with other works such as Subject/Object and House of the Inhabitant Who Refused to Participate. Secondly, Freud's notion of 'uncanny', arguably Hejduk's strong architectural orientation, may serve much better as a main gate among possibly many ones in trying to open his architecture. It is considered that this might also serve as an important clue to solving mysticism remaining yet untouched in his architecture.

• Journal of architectural history
• /
• v.16 no.6
• /
• pp.47-66
• /
• 2007

$Lokap{\bar{a}}las$ are understood as the deities of four directions in Buddhism: $Dhrtar{\bar{a}}stra$ in the East, $Vir{\bar{u}}dhaka$ in the South, $Vir{\bar{u}}p{\bar{a}}ksa$ in the West and $Vai{\acute{s}}ravana$ in the North respectively. Their common name is, therefore, called as the "Four Guardian Kings", whose function is to prevent demonic forces from entering into its sacred world. Although the position of $Lokap{\bar{a}}las$ is to the lowest level in the hierarchy of the minor deities in Buddhism, the cult of $Lokap{\bar{a}}las$ was widely spread and prominent in the countries of Northern Buddhism. It played a significant role in terms of the state-protecting Buddhism, on behalf of it's esoteric and magic power. More than 20 Gateways of the $Lokap{\bar{a}}las$ and $Lokap{\bar{a}}la$ statues were still well preserved in Korea, and they were believed to be constructed after the Japanese attack in 1592. After war, monks had concentrated on restoring ruined temples and building many new Gateways of the Four Guardian Kings over the Korean peninsular. Under such circumstances, even though the $Lokap{\bar{a}}las$ played a significant role as the subject of cult in Korean Buddhism. they might have a small chance to be taught traditional Lama iconography exactly. The purpose of this essay is to examine the relation of orientation of the Gate way of $Lokap{\bar{a}}las$ and allocation of each Kings inside the gate.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.3
• /
• pp.91-102
• /
• 2019

This study explores the causes and processes of morphological transformation of apartment complexes in Busan. All apartment complexes built until the year 2016 were selected for statistical analysis, drawing/map examination, field observation, selected expert interviews based on 6 periodical groups: Period I(~1990), Period II(1991~1995), Period III(1996~2000), Period IV(2001~2005), Period V(2006~2010), and Period VI(2011~2016). The research argues for three 'arrangement' types, P1U, L1U and P2U, which have dominated the whole periods occupying 88% of the total 260 complexes. The switch of the leading type represents for morphological transformation of apartment complexes. Four aspects, density(F.A.R.), height(maximum number of floors), deformed-building-type ratio, and building-orientation, have affected the change of 'arrangement' types. Density was the major cause of the arrangement-type switch, from P1U to L1U, on Period II(1991~1995). The morphological change, from type L1U to P2U, on Period V(2006~2010) was caused by height and orientation, and is correlated with the increased number of deformed-type buildings. The first phase morphological change on Period II(1991~1995) was resulted by the supply side of apartment. However, the second phase transformation on Period V(2006~2010) had gone through the complex process including reflection of consumers' demands. The significance of research is to reveal the morphological transformation process of apartment complexes through analytical investigation of the entire apartment data in Busan. The result shows that the major change of urban paysage started to occur from Period V(2006~2010), and the superficial evaluation on apartment 'being monotonous and repetitive' may not be proper at least from the perspective of town plan.

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.113-129
• /
• 2022

A building's eco-friendliness is directly related to various values including the life cycle cost of a building. However, the conventional architectural design method has a limitation in that it cannot create an optimized case according to the surrounding environmental conditions. Therefore, the purpose of this research is to present a design assistance tool that can review planning cases optimized for the environmental conditions of the building site in the planning stage of architectural production. To achieve the purpose of the study, an algorithm for realizing 3D modeling of the region and analysis of the solar environment was produced based on the site contours, building, and road information from the digital topographic map provided by the National Geographic Information Institute. To examine the validity of the developed algorithm, a comparative experiment was conducted targeting the elevation direction of the existing building. As a result, it was found that the optimal elevation direction selected by the algorithm can receive higher insolation compared to the front facade of the main building.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.69-74
• /
• 2017

Purpose: The apartment complex constructed recently is composed of very various types of building, plan, and orientation etc. However, it is difficult to remark conclusively that these various types of buildings are designed energy-effectively, since it is difficult for architects to find useful energy design guideline for decision making. By the preceding study, the present condition and problem about this subject was grasped, apartment building types were examined and representative types were extracted. Method: Large apartment building complex having 1940 households, located in haengbok-dosi, sejong city, Korea is used as an example to conduct this study. Representative building types are extracted first. Then, heating and cooling load of households is analyzed. Lastly, effect of outdoor air cooling is investigated by computer simulation. Result: Results of this research are summarized as follows: 1. Besides solar gain, household layout of building, orientation, and plan have compositive effects on heating and cooling load. 2. The effect of outdoor air cooling in apartment can be improved by arranging windows of households.

• KIEAE Journal
• /
• v.15 no.1
• /
• pp.53-60
• /
• 2015

Increase in energy consumption in building is a big concern world over. In Nepal, energy crisis is a big issue but energy demand in buildings is barely even thought about. In the southern part of Nepal, where the weather is mostly hot during the year, cooling in buildings is very important. This is an initial study regarding building design strategies which focuses on cooling energy consumption in the building. It can be seen from the study that simple passive strategies can be applied in building design which can support in decreasing cooling load. Different passive cooling strategies like orientation, building size, thermal mass, window design and two direct cooling strategies have been investigated in this study. Direct cooling strategies like shading and natural cooling helps in passive cooling. Different desing strategies have different impact on the cooling energy requirement and the study shows that thermo physical property of building materials has the maximum effect on the energy consumption of the building. Each design strategy creates and average of 20% decrease in energy consumption, whereas the thermal conductivity can have as much as 10 times more effect on the energy consumption than other design strategies.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1331-1351
• /
• 2015

Cold-formed built-up members are compression members that are common in multiple areas of steel construction, which include cold-formed steel joints and stud walls. These members are vulnerable to unique buckling behaviors; however, limited experimental research has been done in this area. Give this gap, experimental testing of 71 built-up members was conducted in this study. The variations of the test specimens include multiple lengths, intermediate welds, orientations, and thicknesses. The experimental testing was devised to observe the different buckling modes of the built-up C-channels and the effects of the geometrical properties; to check for applicability of multiple intermediate welding patterns; and to evaluate both the 2001 and 2007 editions of the American Iron and Steel Institute (AISI) Specification for built-up members in pure compression. The AISI-2001 and AISI-2007 were found to give inconsistent results that at times were un-conservative or overly conservative in terms of axial strength. It was also found that orientation of the member has an important impact on the maximum failure load on the member.