• Korean Journal of Computational Design and Engineering
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2015

Using BIM (Building Information Modeling)-based design information to analyze various engineering processes has been widely adopted in construction projects. However, since typical building permit processes often require traditional 2D-based design information for submission and to obtain building approval, there are some challenges in delivering such data thru BIM-based design information. This paper proposed a methodology to generate and meet information requirements for permit applications and approvals based on BIM-based design information. To that end, we analyzed the required information necessary to make submissions for building approvals using the Seumter system. We then suggested a process to collect the required information from BIM-based data, and classified this into two types: BIM-internal and BIM-external information requirements. In addition, we proposed three algorithms to extract and to match between extracted BIM data and BIM-internal information requirements using IFC(Industry Foundation Classes). The proposed methodology enables to ensure the efficiency and the accuracy when providing data for building permit review and approval.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.9
• /
• pp.19-28
• /
• 2019

Domestic and international laws and regulations on design of residential environment are adopted, revised and supplemented to solve the problems such as access, safety and privacy in the residential space of the elderly and the disabled. This study is an comparative analysis of Korea and Japan, USA, UK laws and regulations on environment design by literature review. The purpose of this study is to present the basic materials required for development of the standard that would supports the undiscriminatory physical environment for the socially weak who are experiencing aging and disability, due to the restricted scope of entrance, bathroom and kitchen spaces with high frequency of safety accident. The results of this study are as follows. (1) Design guidelines on residential environment were compared under five residential factors for aging in place: safety, accessibility, amenity, usability and privacy. (2) The guidelines of each country applied to the entrance, bathroom and kitchen space were compared. (3) The results showed present guidelines should be completed with 'safety', 'accessibility', 'amenity', 'usability' and 'privacy' for Aging in place.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.6
• /
• pp.267-275
• /
• 2020

In the event of an earthquake, non-structural components require seismic performance to ensure evacuation routes and to protect lives from falling non-structural components. Accordingly, the seismic design code proposes horizontal force for the design and evaluation of non-structural components. Ground motion observed on each floor is affected by a building's eigen vibration mode. Therefore, the earthquake damage of non-structural components is determined by the characteristics of the non-structural component system and the vibration characteristics of the building. Floor response spectra in the seismic design code are estimated through time history analysis using seismic waves. However, it is difficult to use floor response spectra as a design criterion because of user-specific uncertainties of time history analysis. In addition, considering the response characteristics of high-rise buildings to long-period ground motions, the safety factor of the proposed horizontal force may be low. Therefore, this study carried out the horizontal force review proposed in the seismic design code through dynamic analysis and evaluated the floor response of seismic waves considering buildings and predominant periods of seismic waves.

• Advances in Computational Design
• /
• v.1 no.4
• /
• pp.297-313
• /
• 2016

The flexural strength of circular concrete-filled tubes (CCFT) can be estimated by several codes such as ACI, AISC, and Eurocode 4. In AISC and Eurocode, two methods are recommended, which are the strain compatibility method (SCM) and the plastic stress distribution method (PSDM). The SCM of AISC is almost the same as the SCM of the ACI method, while the SCM of Eurocode is similar to the ACI method. Only the assumption of the compressive stress of concrete is different. The PSDM of Eurocode approach is also similar to the PSDM of AISC, but they have different definitions of material strength. The PSDM of AISC is relatively easier to use, because AISC provides closed-form equations for calculating the flexural strength. However, due to the complexity of calculation of circular shapes, it is quite difficult to determine the flexural strength of CCFT following other methods. Furthermore, all these methods give different estimations. In this study, an effort is made to review and compare the codes to identify their differences. The study also develops a computing program for the flexural strength of circular concrete filled tubes under pure bending that is in accordance with the codes. Finally, the developed computing algorithm, which is programmed in MATLAB, is used to generate design aid graphs for various steel grades and a variety of strengths of steel and concrete. These design aid graphs for CCFT beams can be used as a preliminary design tool.

• Architectural research
• /
• v.21 no.3
• /
• pp.69-77
• /
• 2019

Architects are facing increasing risks that result from heightened expectations of benefits and performance when designing green buildings compared to traditional buildings. This study aims to explore the possible risk factors for architects in green building projects in South Korea and assess risk mitigation measures. To attain this goal, 14 risk factors and 12 mitigation measures were determined through an extensive literature review. A questionnaire was administered to architects practicing green building design and criticality index was employed to assess major risk factors and mitigation measures. This study identified 'adoption of new technology and process', 'green building certification results', 'building products and materials', and 'energy saving uncertainty' as the major risk factors of green building projects. Additionally, the questionnaire proposed 'contract indicating each party's role, liability, and limitations clearly', 'utilizing integrated design process', and 'understanding client's goal in green building projects' as the three most effective risk mitigation measures in designing green buildings. There are few studies that focus on architects' perceived risks concerning green building projects; this study contributes to a deeper knowledge and attempts to fill the current literature gap, which would benefit South Korea's green building design practice by aiding in the development of better risk management strategies.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.1
• /
• pp.173-178
• /
• 2020

In this study, we analyzed space heating and domestic hot water(DHW) charges from 2017 to 2018 for 151,206 households in 202 apartment complexes built from 1997 to 2016, in order to evaluate the effectiveness of Korea's insulation standards reinforcement. The applied insulation standards were revised three times(in 1987, 2001 and 2010). We used the Anderson-Darling test to review the normality of the space heating and DHW charges. As a result, each p-value was greater than 0.05 and it followed the normal distribution. The annual average space heating charges per unit area of apartments with the 1987 insulation standards were 5,237￦/㎡a in 2017 and 5,328￦/㎡a in 2018. The heating charges with the 2001 standards were 4,827￦/㎡a in 2017 and 4,817￦/㎡a in 2018. Compared to previous standards(1987 standards), heating charges decreased by 7.8% and 9.6%. Also the heating charges with the 2010 standards were 3,683￦/㎡a in 2017 and 3,734￦/㎡a in 2018. Compared to previous standards(2001 standards), heating charges decreased by 24.3% and 21.5%. On the other hand, compared to each previous standards, DHW charges were decreased by 12.2%, 13.6% or increased by 4.6%, 6.9%, which means there's no correlation between insulation standards reinforcement and DHW charges.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.315-326
• /
• 2023

The design principles and implementation of rebar lap splice in architectural structures are governed by building regulations. Nevertheless, the minimization of rebar-cutting waste (RCW) is often impeded by the mandatory requirements pertaining to the rebar lapping zone as prescribed in design codes. In real-world construction scenarios, compliance with these rules often falls short due to hurdles concerning productivity, quality, safety, time, and cost. This discrepancy between code stipulations and on-the-ground construction practices necessitates an academic exploration. The goal of this research was to delve into the effect of rebar lap splice placement on the robustness and constructability of building edifices. The study initially took on a review of the computation of rebar lapping length and the rules revolving around the lapping zone. Following this, a structural robustness and constructability examination was undertaken, focusing on adherence to the lap splice zone. The interpretations and deductions of the research led to the following insights: (1) the efficacy of rebar lap splice is not solely contingent on the moment, and (2) the implementation of rebar lap splice beyond the specified zone can match the structural integrity and robustness of those confined within the designated area. As a result, the constraints on the rebar lapping zone ought to be revisited and possibly relaxed. The conclusions drawn from this research are anticipated to reconcile the disconnect between building codes and practical construction conditions, furnishing invaluable academic substantiation to further the endeavor of achieving near-zero RCW.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.9
• /
• pp.131-142
• /
• 2019

The purpose of this study was to find out the characteristics of housing policies and apartment designs by comparison of supplying and remodeling apartments between France and Korea. The literature review was used in Korea cases and the literature review, site investigation, and expert interviews were used in France cases. At first, by reviewing the related literatures about the apartment developments and regenerations in France and Korea, twelve remodeling cases were represented respectively in Ile de France and Seoul. As a result, in housing policy, the Korean housing market had a shortage of low-priced houses related to biased apartment developments by private sector dependence. Consequently, the living in Korea generally required the high price in low quality houses. But in France, the housing policies were very successful in housing quantity, quality, and expense. It is involved in balances between the public housing supply and the activation of a private housing market based on the government support policy. Nevertheless, in the success of the apartment as a house type, apartments in France means the social elimination because of the supply method problems and the management failures of HLM institutions. However, in Korea, the apartment implies the successful life of the middle class population because of the competitive evolutions during 40 years as a market housing. Secondly, In the characteristics of remodeling, the remodeling in Korea was for property value improvements. It mainly executed to expand the size of a house by expansion of living space. However the remodeling in France was for social mixes and connections with the surrounding area. It mostly performed by various design methods such as vertical merging houses, partial removal, reconstruction, and construction of a local community centers and mixed-use residential buildings. This study shows the simultaneously remodeling features of those two countries. These findings can be used in developing effective strategies for the public housing regenerations in Korea and other countries.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2020

As the amount of information generated in the construction project increases exponentially, design and construction review have a serious impact on the success of the site. For this reason, academic and business circles have been expanding the use of BIM at the whole life, and BIM is now accepted as one of the standards used in the construction industry. However, the BIM-based design for the temporary work is used as an aid to the 2D design because there is no specialized software and there is absolutely lack of a professional engineer. The objective of this research is to develop BIM-based temporary work support system. This system minimizes human errors in BIM-based design, quantity takeoff and inspection and shortens working hours.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.5
• /
• pp.61-72
• /
• 2019

The purpose of this study is to propose the clue of planning guideline for the elderly welfare center supporting the healthy life of the elderly through deriving the planning element of the elderly welfare center based on the Salutogenic Model(SM). The research method was proceeded with literature review. The meaning of Sense of Coherence(SOC) and Generalised Resistance Resources(GRR) which constitute Salutogenic Model is established. The correlation between SOC and GRR is analyzed. The conclusions of this study are as follows. First, EBD, BD, HD, UD, and BFD were studied as planning theories that could enhance the SOC of space. Second, based on the five planning theories, 43 planning elements needed for the elderly welfare center plan were derived. Third, as a result of classifying the plan elements based on the SOC, 'Manageability' is divided into 22 elements, 'Meaningfulness' is 11 and 'Comprehensibility' is 10 elements. Fourth, the details of the SOC items for each theory are as follows: BFD focuses on 'Manageability' with 'Manageability'(74%) and 'Comprehensibility'(26%), but 'Meaningfulness' does not exist. And UD regards 'Comprehensibility'(66%) as important, and 'Manageability' and 'Meaningfulness' as 17%. BD, on the other hand, has a high percentage of 'Meaningfulness'(70%), 'Comprehensibility'(21%) and 'Manageability'(9%). Next, the 'Manageability' of HD and EBD is 46%. And HD was 'Meaningfulness'(34%), 'Comprehensibility'(20%), and EBD was 'Meaningfulness'(30%) and 'Comprehensibility'(24%). The three items of SOC showed different distribution according to the spatial planning theory. As a result of the analysis, the spatial planning theory with the 'Comprehensibility' was related to Universal Design(UD), and the spatial planning theory with the 'Manageability' was related to Barrier-Free Design(BFD). In addition, the spatial planning theory of 'Meaningfulness' was related to Bio-philic Design(BD). Therefore, the plan of the elderly welfare center needs to approach the multidimensional design methodology to enhance the SOC(Sense of Coherence).