• Title/Summary/Keyword: Arches

Search Result 355, Processing Time 0.022 seconds

Regional load deflection rate of multiloop edgewise archwire (Multiloop edgewise arch wire의 부위별 하중변형률)

  • Kim, Byoung-Ho;Yang, Won-Sik
    • The korean journal of orthodontics
    • /
    • v.29 no.6 s.77
    • /
    • pp.673-688
    • /
    • 1999
  • This study was conducted in order to analyze the mechanical characteristics of multiloop edgewise archwire (MEAW). The purposes were 1) to compare load deflection rate (LDR) of MEAW with that of various other arch wires in the individual interbracket span, 2) to compare the wire stiffness in the interbracket span with that in the multi-L-loop region (the span from distal border of the bracket of the lateral incisor to the mesial border of the buccal tube of the second molar), and 3) to verify the experimental results with theoretically derived formula. The single L-loops of five different horizontal lengths and multi-L-loops for the upper and lower arches were made out of .$016\times.022$ permachrome stainless steel wire. Straight segment of plain stainless steel, TMA and NiTi wire of the same dimension were prepared. The LDR was measured using Instron model 4466 with the load cell of 50N capacity at cross head speed of 1.0mm/min, and maximum deflection of 1.0mm. Five specimens were tested under each experimental condition. The wire stiffness number for each interbracket region and multi-L-loop region was calculated from the LDR and the interbracket spans. By dividing the theoretical model of multi-L-loop into 35 linear segments, the energy stored in each segment was obtained. Then the LDR and wire stiffness of single L-loop and multi-L-loop were calculated and compared. The findings were as follows : 1) The average LDR of MEAW in the individual interbracket region was 1/1.53 of that of the NiTi,1/2.47 of TMA and 1/5.16 of the plain stainless steel wire. 2) The wire stiffness of MEAW in the multi-L-loop region was 1.53 times larger than that in the interbracket region, and the LDR was almost twice as large as that of NiTi in that region. 3) According to the theoretically derived equation, the wire stiffness of the single L-loop was lower than that of multi-L-loop. The results of this study suggest that MEAW has the unique mechanical Property which could allow individual tooth movement and transmit elastic force effectively through the entire arch wire.

  • PDF

COMPARATIVE STUDY ON MUSCLE ACTIVITIES OF PRE- AND POST-ORTHOGNATHIG SURGERY IN SKELETAL CLASS III MALOCCLUSION PATIENTS AND NORMAL GROUP (성인에서 골격형 제 III급 부정교합자의 악교정 수술 전, 후와 정상교합자의 근활성도에 대한 비교연구)

  • Jung, Kyung-Jin;Sohn, Byung-Wha
    • The korean journal of orthodontics
    • /
    • v.25 no.3 s.50
    • /
    • pp.355-373
    • /
    • 1995
  • Craniofacial region is a musculodentoskeletal system that consists of many anatomical structures ; cranioskeletal structures, dental arches, and formation and functions of masticatory muscles have close correlations. Growth and development of craniofacial region are influenced by not only hereditory factors, but also environmental factors such as craniofacial muscles and surrounding tissues. On the contrary, however, study on changes in functions or adaptations of craniofacial muscles following changes of craniofacial skeletal structures has been somewhat insufficient. The author's purpose was to observe correlations between masticatory muscular functions and change patterns according to cranial skeletal structures and occlusion patterns, for this, comparative study of muscle activity changes of preand post- orthognathic surgery states in skeletal Cl III malocclusion patients was peformed. The selected sample groups were 15 normal male patients, 15 skeletal Cl III pre-orthognatic surgery patients and 15 skeletal Cl III post-orthognatic surgery patients. For each sample groups, cephalometric x-ray taking, masticatory efficiency test and measurements of muscle activities in anterior temporal muscle, masseter and upper lip in rest, clenching, chewing and swallowing were carried out. The following results were obtained : 1. In resting state of mandible, pre-surgery malocclusion group showed higher m. activities in ant. temporalis, masseter and upper lip than post-surgery group. Post-surg. malocc. group showed significantly high m. activity only in upper lip compared to the normal group. 2. In clenching state, post-surg. malocc. group showed higher m. activities in ut. temporalis, masseter and upper lip than pre-surg. malocc. group. 3. In chewing state, post-surg. malocc. group showed higher m. activities in ant. temporalis and masseter than pre-surg. malocc. group, on the other hand, decreased upper lip activity was noticed. 4. In swallowing state, post-surg. malocc. group showed lower upper lip activity than pre-surg. malocc. group but higher than that of the normal group. No significant difference in m. activities of ant, temporalis and masseter was noticed among the three groups. 5. Masticatory efficiency was lower in pre-surg. malocc. group than normal group, masticatory efficiency showed an increase in post-surg. malocc. group compared to the pre-surg. malocc. group. However, both groups showed significant differences compared to the normal group.

  • PDF

The Optimal Configuration of Arch Structures Using Force Approximate Method (부재력(部材力) 근사해법(近似解法)을 이용(利用)한 아치구조물(構造物)의 형상최적화(形狀最適化)에 관한 연구(研究))

  • Lee, Gyu Won;Ro, Min Lae
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.13 no.2
    • /
    • pp.95-109
    • /
    • 1993
  • In this study, the optimal configuration of arch structure has been tested by a decomposition technique. The object of this study is to provide the method of optimizing the shapes of both two hinged and fixed arches. The problem of optimal configuration of arch structures includes the interaction formulas, the working stress, and the buckling stress constraints on the assumption that arch ribs can be approximated by a finite number of straight members. On the first level, buckling loads are calculated from the relation of the stiffness matrix and the geometric stiffness matrix by using Rayleigh-Ritz method, and the number of the structural analyses can be decreased by approximating member forces through sensitivity analysis using the design space approach. The objective function is formulated as the total weight of the structures, and the constraints are derived by including the working stress, the buckling stress, and the side limit. On the second level, the nodal point coordinates of the arch structures are used as design variables and the objective function has been taken as the weight function. By treating the nodal point coordinates as design variable, the problem of optimization can be reduced to unconstrained optimal design problem which is easy to solve. Numerical comparisons with results which are obtained from numerical tests for several arch structures with various shapes and constraints show that convergence rate is very fast regardless of constraint types and configuration of arch structures. And the optimal configuration or the arch structures obtained in this study is almost the identical one from other results. The total weight could be decreased by 17.7%-91.7% when an optimal configuration is accomplished.

  • PDF

Studies on the Morphological Characteristics and Life History of the Chili Fish, Cultriculus eigenmanni (Jordan et Metz) (1) On the Egg Development and the Fry in the Larval Stage (치리(Cultriculus eigenmanni)의 형태 및 생활사에 관한 연구 I. 난발생과 부화자어에 대하여)

  • KIM Eul-Bae;KIM Young-Gill
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.17 no.2
    • /
    • pp.151-156
    • /
    • 1984
  • The Chili fish, one of the most common species of the freshwater fishes, is distributed in the river basins of the western coast of Korea. However, any studies on this fish, especially its development or life history, have not been made so far. The authors, therefore, carried out an experiment to reveal some characteristics of egg develoment and fry in this fish. For accomplshing this study, we caught some adult Chili fish by means of a casting net at raceway in the vicinity of Kunsan in June and July, 1983; then, we injected 0. 1 cc Gonadotrophic hormone 1,000 unit solution (Puberogen) in order to induce the spawning on the abdominal cavity of male and female respectively, Approximately 12 hours after injection, the artificially fertilized eggs by using of the dry method and the naturally fertilized eggs were observed simultaneously in the aquarium ($30{\times}50{\times}70cm$). The fertilized eggs, in spherical shape, were sperative, demersel, adhesive nature and $1.38{\sim}1.59\;mm$ in diameter. The light yellow yolk was opaque and $1.17{\sim}l.27\;mm$ in diameter. The hatching of eggs took place at 29.5 hours after fertilization under the condition of $23.5{\sim}25.0^{\circ}C$ water temperature. Basically there were not found so many different aspects in comparison with the common species of Cyprinidae in the development process of eggs : however, there were a few noticable characteristics, that is, pigment cells, eye balls and blood circulation are invisible, or the velocity of egg development is rapid, seemed similar to the Loach's egg. Newly hatched larvae with the yolk sac (2.39 mm in size) were $3.87{\sim}3.99\;mm$ in total length and their myotome number was expressed as 28+15=43. About 20 hours after hatching, a caudal and a pectoral fin as well as an anus began to orgin. In addition, a few malanophore showed on the upper regin of the yolk sac of the larvae whose size was 4.73 mm in total length. The larvae developed about 5.02 mm in total length, and the median fin fold in the abdomen extended forward to two thirds or beyond of the yolk sac at 50 hours after hatching. Simultaneously, the eye balls and mouth also appeared. After 3 days, the yolk sac nearly disappeared, and the larvae (5.4 mm in total length) with perfect eye balls began to swim for themselves for the first time. Also, the specialization between the gill arches and the ailmentary canal, the development of each fins except dorsal fin as well as the blood circulation obviously distinguished in this stage. The larvae whose total length was 5.68 mm was very brisk: also, the development of the dorsal fin rudiment, nearly perfect formation of each organs and the function of the upper and lower jaws were noticeably observed 5 days after hatching.

  • PDF

THE INDUCTION OF BONE REGENERATION AT FURCATION LESIONS WITH PULPECTOMY AND FURCATION CURETTAGE IN PRIMARY MOLARS (유구치 치근분지부 병소의 치수절제술과 소파술에 의한 골재생)

  • Lee, Seung-Hyun;Woo, Youn-Sun;Kim, Jae-Moon;Jeong, Tae-Sung;Kim, Shin
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.32 no.4
    • /
    • pp.628-633
    • /
    • 2005
  • Deep caries in primary molars without early intervention frequently induce a pulpal disease and consequent furcation lesion with fistulous openings Up to now, majority of the textbooks on pediatric dentistry and literatures have described that extraction of the inflicted teeth is indicated for these cases and in reality these teeth have usually been extracted in the dental clinics. However when we recognize the excellent capacity of bone regeneration in children and the presence of numerous accessory canals at furcation areas, the removal of infection source in pulp by pulpectomy and inflammatory granulation tissues at furcation areas by furcal curettage might open the possibility of rapid healing at the furcation regions. In this report, 10 cases of primary molars in 3 to 6-year-old children with fistulous openings and furcation lesions in moderate size of 2 to 4mm in depth radiolucency at furcation lesion have been chosen. After pulpectomy and furcal curettage, evident bone regeneration was detected radiographically in all cases. Through the cases, we came to realize that all the cases previously described are not the indications of extraction and this approach could make many cases with pulp and furca combined lesions survive and remain healthy in the children's dental arches. However, in order for this approach to acquire objective appropriateness, it is thought that more scrupulous evaluation is desirable on the various factors regarding the indication such as the extent of furcation lesions, absorption status of teeth, amount of covering bone on succeeding teeth and so on.

  • PDF