• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.82-87
• /
• 1991

Hemifacial microsomia is a term used to describe a facial anomalies caused by the defect of anatomic structures originated from the first and the second branchial arches. The defect area encompasses some facial areas including mandible, facial muscles, masticatory muscles, cranial nerves, auricles, etc., and the degree of manifestations of the anomalies is extmely diverse. A 20-year-old man complaining of facial asymmetry and malocclusion visited our hospital. An orthognathic surgery was performed for the correction of hard tissue anomalies and then autogenous dermis-fat autotransplantation was done for the improvement of remaining soft tissue defect. The result was esthetically good and the case was presented here.

• The korean journal of orthodontics
• /
• v.51 no.6
• /
• pp.375-386
• /
• 2021

Objective: To evaluate the accuracy of a one-piece bracket jig system fabricated using computer-aided design and manufacturing (CAD/CAM) by employing three-dimensional (3D) digital superimposition. Methods: This in vitro study included 226 anterior teeth selected from 20 patients undergoing orthodontic treatment. Bracket position errors from each of the 40 arches were analyzed quantitatively via 3D digital superimposition (best-fit algorithm) of the virtual bracket and actual bracket after indirect bonding, after accounting for possible variables that may affect accuracy, such as crowding and presence of the resin base. Results: The device could transfer the bracket accurately to the desired position of the patient's dentition within a clinically acceptable range of ± 0.05 mm and 2.0° for linear and angular measurements, respectively. The average linear measurements ranged from 0.029 to 0.101 mm. Among the angular measurements, rotation values showed the least deviation and ranged from 0.396° to 0.623°. Directional bias was pronounced in the vertical direction, and many brackets were bonded toward the occlusal surface. However, no statistical difference was found for the three angular measurement values (torque, angulation, and rotation) in any of the groups classified according to crowding. When the teeth were moderately crowded, the mesio-distal, bucco-lingual, and rotation measurement values were affected by the presence of the resin base. Conclusions: The characteristics of the CAD/CAM one-piece jig system were demonstrated according to the influencing factors, and the transfer accuracy was verified to be within a clinically acceptable level for the indirect bracket bonding of anterior teeth.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.7
• /
• pp.63-72
• /
• 2019

The purpose of this study is to apply the types of urban street pattern and the shape of streets to the master plan of a religious community complexes. The street pattern is a framework of urban structure and to understand the urban structure is helpful to understand the nature of urban streets. By analysing the precedent researches, the types of street patterns are classified as a serial pattern, a branching pattern, a grid pattern and a web pattern. The street patterns are hierarchically composed and classified as a differential development and sequential development. There are boundaries and gates where the street space is differentiated to the more private level. The urban streets continue to the architectural streets such as arcades, deck streets, corridors, lobbies and halls. The purposes and results of the master plan of this religious community complexes are as follows. 1) The school area, housing area and service area are properly separated and connected. They are separated by the building masses and connected by the street space in between. 2) The street pattern of this complexes is a serial pattern where the streets are the center of each functional building groups. The entry square is divided by the symbolic building. The one branch is school street and the other is living street. These streets are combined again to the festival street. 3) The architectural streets are organically related to the urban streets. 4) Each street spaces are of adequate form according to its properties as a place. 5) There are boundaries or gates such as a gab between buildings, posts, arches and deck streets according to the relationship between streets.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.1
• /
• pp.60-68
• /
• 2021

Objective : Until recently, the transfemoral approach (TFA) was used as the primary method of arterial approach in acute ischemic stroke (AIS). However, TFA resulted in longer reperfusion times and worse outcomes in the mechanical thrombectomy (MT) of patients with complex aortic arches and significant carotid tortuosity. We found that the transradial approach (TRA) is a more favorable alternative approach for MT in such cases. Methods : We performed a retrospective review of our institutional database to identify 202 patients who underwent MT for AIS between February 2015 and December 2019. Patient characteristics, cause of TFA failure, procedure time, intra-procedural complications, and outcomes were recorded. Results : Eleven (5.4%) of 202 patients, who underwent MT for AIS, crossed over to TRA for recanalization, and eight (72%) of 11 achieved successful recanalization (≥modified Treatment in Cerebral Infarction 2b). The mean age (mean±standard deviation [median]) was 82.3±6.6 (76) years, and five of the 11 patients were male. The last seen normal to puncture time was 467.9±264.72 (264) minutes; baseline National Institutes of Health Stroke Scale score was 28.9±14.5 (16). Six (55%) of the 11 patients had right vertebrobasilar occlusions, and the remaining five (45%) had anterior circulation occlusive disease. The time from groin puncture to final recanalization time (overall procedural time) was 78.0±20.1 (62) minutes. The mean crossover time from TFA to TRA was 45.2±10.5 (41) minutes. The mean time from radial puncture to final recanalization was 33.8±10.5 (28) minutes. Distal thrombus migration events in previously unaffected territories occurred in 3/8 patients (37%). At 90 days, three patients (28%) had a favorable clinical outcome. Conclusion : Although rare, failure of TFA has been known to occur during MT for AIS. Our results demonstrate that TRA may be an alternative option for AIS intervention for select patients with subsequent timely revascularization. However, the incidence of distal thrombus migration was high, and the first puncture to reperfusion time was prolonged because of the time taken for the crossover to TRA after failure of TFA. This study provides some evidence that the TRA may be a viable alternative option to the TFA for MT of AIS.

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.95-104
• /
• 2021

Objective: To evaluate the trueness and precision of full-arch scans acquired using five intraoral scanners and investigate the factors associated with the dimensional accuracy of the intraoral scan data. Methods: Nine adult participants (mean age, 34.3 ± 8.3 years) were recruited. Four zirconium spheres (Ø 6 mm) were bonded to the canines and the molars. Following acquisition of reference scans using an industrial-grade scanner, five intraoral scanners, namely i500, CS3600, Trios 3, iTero, and CEREC Omnicam, were used to scan the arches. Linear distances between the four reference spheres were automatically calculated, and linear mixed model analysis was performed to compare the trueness and precision of the intraoral scan data among the different scanners. Results: The absolute mean trueness and precision values for all intraoral scanners were 76.6 ± 79.3 and 56.6 ± 52.4 ㎛, respectively. The type of scanner and the measured linear distances had significant effects on the accuracy of the intraoral scan data. With regard to trueness, errors in the intermolar dimension and the distance from the canine to the contralateral molar were greater with Omnicam than with the other scanners. With regard to precision, the error in the linear distance from the canine to the molar in the same quadrant was greater with Omnicam and CS3600 than with the other scanners. Conclusions: The dimensional accuracy of intraoral scan data may differ significantly according to the type of scanner, with the amount of error in terms of trueness being clinically significant.

• The korean journal of orthodontics
• /
• v.51 no.1
• /
• pp.23-31
• /
• 2021

Objective: To evaluate the mandibular buccal shelf (MBS) in terms of the angulation and bone depth and thickness according to sex, age, and sagittal and vertical skeletal patterns in a Colombian population using cone-beam computed tomography (CBCT). Accordingly, the optimal site for miniscrew insertion in this area was determined. Methods: This descriptive, retrospective study included 64 hemi-arches of 34 patients. On CBCT images, the angulation, buccal bone depth (4 and 6 mm from the cementoenamel junction [CEJ] of MBS), and buccal bone thickness (6 and 11 mm from the CEJ of MBS) were measured at the mesial and distal roots of the mandibular first and second molars. Results: There were no statistically significant differences in the angulation, depth, and thickness of MBS between male and female patients. The values for the bone around the distal root of the mandibular second molar were significantly greater than the other values. The osseous characteristics were significantly better in participants aged 16-24 years. Class III patients exhibited the best osseous characteristics, with the bone depth at 6 mm being significantly different from that in Class I and Class II patients. Although values tended to be greater in patients with low angles, the difference was not statistically significant. Conclusions: MBS provides an optimal bone surface for miniscrew insertion, with better osseous characteristics at the distal root of the mandibular second molar, 4 mm from CEJ. Adolescent patients, Class III patients, and patients with a low angle exhibit the most favorable osseous characteristics in the MBS area.

• Composites Research
• /
• v.34 no.3
• /
• pp.161-166
• /
• 2021

In this study, we present a research method to develop a shoe that prevents foot injury by inducing the foot pressure. An orthogonal grid sensor was used to check the foot pressure in the upright standing position, and the change in the foot pressure distribution for various conditions was compared. We checked the conditions for distributing foot pressure efficiently by changing the spring constant of the spring inserted into the sole of the shoe and the foot pressure generated with or without the arch of the insole. In order to minimize the experimental error from the randomness of the human body's behavior, it is possible to predict through foot pressure under certain conditions through finite element analysis that simulates the pressure distribution. By checking the change of foot pressure according to the number and arrangement of springs through finite element analysis, conditions were established to provide more efficient foot pressure. The result can be used for designing footwear for patients with diabetic feet.

• Imaging Science in Dentistry
• /
• v.52 no.1
• /
• pp.93-101
• /
• 2022

Purpose: This study compared the effectiveness of complementary metal-oxide semiconductors (CMOS) and photostimulable phosphor (PSP) plates as intraoral imaging systems in terms of time efficacy, patient comfort, and subjective image quality assessment in real clinical settings. Materials and Methods: Fifty-eight patients (25 women and 33 men) were included. Patients were referred for a full-mouth radiological examination including 1 bitewing radiograph (left and right) and 8 periapical radiographs for each side (left maxilla/mandible and right maxilla/mandible). For each patient, 1 side of the dental arch was radiographed using a CMOS detector, whereas the other side was radiographed using a PSP detector, ensuring an equal number of left and right arches imaged by each detector. Clinical application time, comfort/pain, and subjective image quality were assessed for each detector. Continuous variables were summarized as mean±standard deviation. Differences between detectors were evaluated using repeated-measures analysis of variance. P<0.05 was accepted as significant. Results: The mean total time required for all imaging procedures with the CMOS detector was significantly lower than the mean total time required for imaging procedures with PSP (P<0.05). The overall mean patient comfort scores for the CMOS and PSP detectors were 4.57 and 4.48, respectively, without a statistically significant difference (P>0.05). The performance of both observers in subjectively assessing structures was significantly higher when using CMOS images than when using PSP images for all regions (P<0.05). Conclusion: The CMOS detector was found to be superior to the PSP detector in terms of clinical time efficacy and subjective image quality.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.6
• /
• pp.369-378
• /
• 2022

PURPOSE. The purpose of this in vitro study was to assess whether scanning strategies of virtual interocclusal record (VIR) affect the accuracy of VIR during intraoral scanning. MATERIALS AND METHODS. Five pairs of reference cubes were added to the digital upper and lower dentitions of a volunteer, which were printed into resin casts. Subsequently, the resin casts were articulated in the maximal intercuspal position in a mechanical articulator and scanned with an industrial computed tomography system, of which the VIR was served as a reference VIR. The investigated VIR of the upper and lower jaws of the resin master cast were recorded with an intraoral scanner according to 9 designed scanning strategies. Then, the deviation between the investigated VIRs and reference VIR were analyzed, which were measured by the deviation of the distances of six selected reference points on the upper reference cubes in each digital cast to the XY-plane between the investigated VIRs and reference VIR. RESULTS. For the deviation in the right posterior dentitions, RP group (only scanning of right posterior dentitions) showed the smallest deviation. Besides, BP group (scanning of bilateral posterior dentitions) showed the smallest deviation in the left posterior dentitions. Moreover, LP group (scanning of left posterior dentitions) showed the smallest deviation in the anterior dentitions. For the deviation of full dental arches, BP group showed the smallest deviation. CONCLUSION. Different scanning strategies of VIR can influence the accuracy of alignment of virtual dental casts. Appropriate scanning strategies of VIR should be selected for different regions of interest and edentulous situations.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.2
• /
• pp.57-64
• /
• 2022

In this paper, the physical model and governing equations of a shallow arch with a moving boundary were studied. A model with a moving boundary can be easily found in a long span retractable roof, and it corresponds to a problem of a non-cylindrical domain in which the boundary moves with time. In particular, a motion equation of a shallow arch having a moving boundary is expressed in the form of an integral-differential equation. This is expressed by the time-varying integration interval of the integral coefficient term in the arch equation with an un-movable boundary. Also, the change in internal force due to the moving boundary is also considered. Therefore, in this study, the governing equation was derived by transforming the equation of the non-cylindrical domain into the cylindrical domain to solve this problem. A governing equation for vertical vibration was derived from the transformed equation, where a sinusoidal function was used as the orthonormal basis. Terms that consider the effect of the moving boundary over time in the original equation were added in the equation of the transformed cylindrical problem. In addition, a solution was obtained using a numerical analysis technique in a symmetric mode arch system, and the result effectively reflected the effect of the moving boundary.