• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.120-128
• /
• 2020

Objective: The aims of the present study were to evaluate the changes in the maximum lip-closing force (MLF) after orthodontic treatment with or without premolar extractions and verify the correlation of these changes with dentoskeletal changes. Methods: In total, 17 women who underwent nonextraction orthodontic treatment and 15 women who underwent orthodontic treatment with extraction of all four first premolars were included in this retrospective study. For all patients, lateral cephalograms and dental models were measured before (T0) and after (T1) treatment. In addition, MLF was measured at both time points using the Lip De Cum LDC-110R^® device. Statistical analyses were performed to evaluate changes in clinical variables and MLF and their correlations. Results: Both groups showed similar skeletal patterns, although the extraction group showed greater proclination of the maxillary and mandibular incisors and lip protrusion compared to the nonextraction group at T0. MLF at T0 was comparable between the two groups. The reduction in the arch width and depth and incisor retroclination from T0 to T1 were more pronounced in the extraction group than in the nonextraction group. MLF in the extraction group significantly increased during the treatment period, and this increase was significantly greater than that in the nonextraction group. The increase in MLF was found to be correlated with the increase in the interincisal angle and decrease in the intermolar width, arch depth, and incisor-mandibular plane angle. Conclusions: This study suggests that MLF increases to a greater extent during extraction orthodontic treatment than during nonextraction orthodontic treatment.

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.135-141
• /
• 2021

Objective: To assess the effects of thermoforming on aligner thickness and gap width in six aligner systems with the same nominal thickness. Methods: Six passive upper aligners of different brands were adapted to a single printed cast. Each sample was evaluated with high-resolution micro-computed tomography. To investigate aligner thickness and gap width, two-dimensional (2D) analysis was conducted assessing the effects of the following variables: tooth type (central incisor, canine, and first molar), 2D reference points, and aligner type. Data were analyzed and compared using analysis of variance and Tukey's post-hoc tests (p < 0.05). Results: Tooth type, dental region, and aligner type affected both the gap width and aligner thickness. The aligner thickness remained moderately stable across the arch only in the F22. Conclusions: All thermoformed samples displayed smaller aligner thickness and gap width at anterior teeth and both gingival and coronal centers than at posterior teeth and occlusal surfaces.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.23-34
• /
• 2005

Collective changes caused by orthodontic tooth movement evaluated in a specific treatment modality could give suggestive information on the specific treatment strategy. The aim of this study was to investigate retrospectively the characteristics of the orthodontic tooth movement during surgical-orthodontic treatment in order to provide an effective presurgical orthodontic treatment planning for the maxillary premolar extraction modality In the skeletal Class III malocclusion patient. Pre- and post-treatment dental casts of skeletal Class III malocclusion patients with nonextraction (N=:24) and the maxillary premolar extraction (N=31) were collected. The angulation and inclination measuring gauge(Invisitech Co. Seoul, Korea) was used to evaluate the orthodontic tooth movement. The changes in the maxillary and mandibular dental arch widths were also measured from the canines to the second molars. As a result, more palatal inclination change in the maxillary dentition was found with the premolar extraction modality than with the nonextraction modality. Linear regression analysis showed that the inter-arch width coordination was mainly due to the inclination changes of maxillary posterior teeth We conclude that the indications and proper treatment planning for surgical-orthodontic treatment in skeletal Class III malocclusion with maxillary premolar extraction could depend partly on the magnitude of the transverse inter-arch coordination especially in the maxillary dentition.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.457-471
• /
• 1997

The Purpose of this study was to estimate relative importance among the causative factors o( arch length discrepancy(ALD) and Possibility of prediction of the ALD in the mixed dentition. The sample consisted of the casts of the 142 young adults who had no abnormal muscle function, no skeletal abnormalities and Class I molar relationship. We classified the sample by gender and the extent of ALD, and measured mesiodistal diameters of each tooth and the dimensions of the dental arch. The computerized statistical analyses was carried out with SPSS win program. The results were as follows ; 1. Most of the variables of spacing group and some variables of dental arch dimension of crowding group were significantly different between genders. But in normal group, there were few differences. 2. In male crowding and female spacing group, mainly measurements of tooth dimension were significantly different from those of normal group. 3. In male spacing and female crowding group, measurements of dental arch dimension were significantly different from those of normal group. 4. The measurements of dimension of dental arch were highly correlated with ALD in correlation analysis and factor analysis. 5. Prediction equations for adult's ALDs by means of what can be measured in the mixed dentition(mesiodistal dimensions of incisors and first molar, intermolar width and arch length) showed R square from $63\%$ to $80\%$.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.15-22
• /
• 2005

The Purpose of this study was to clarity morphological differences among mandibular dental arch forms in Korean malocclusion patients. The sample in this study consisted of 114 Class I. 119 Class II, and 135 Class III malocclusion cases. The most facial portions of 13 proximal contact areas were digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on the data on the mandibular tooth thickness. Four linear and two proportional measurements were undertaken The dental arches were classified into square. ovoid, and tapered forms to compare the frequency distributions. Our results suggested that there was no single arch form specific to any particular Angle classification or sex. It appeared to be the frequency of a particular arch form that varies among the Angle classifications. In comparison of arch measurements between male and female. there was no statistical difference except in the intermolar width. In comparison of arch size measurements among the different Angle classifications, there were statistically significant differences between Class I and Class III malocclusion groups and between Class II and Class III malocclusion groups. In comparison oi frequency distribution of arch forms in Class I and III malocclusion groups, the square form demonstrated the highest distribution followed by the ovoid and tapered forms in that order. In the Class II malocclusion group, the square form showed the highest distribution. followed by the tapered and ovoid forms in that order There was no statistical difference in the frequency distribution of arch forms between male and female groups.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.364-375
• /
• 2007

The purpose of this study was to compare arch dimensions and frequency distribution of arch forms between Korean and Japanese Class I, II, and III malocclusion groups. Methods: The sample consisted of 368 Korean cases (114 Class I, 119 Class II, and 135 Class III malocclusion) and 160 Japanese cases (60 Class I, 50 Class II, and 50 Class III malocclusion). The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket slot points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. Measurements are statistically analyzed in each malocclusion group. The dental arches were classified into square, ovoid, and tapered forms to determine and compare the frequency distributions between the two ethnic groups. Results: The findings of this study showed that Japanese females in Class I and II groups had a statistically significant narrower mandibular dental arch width compared with the Japanese males, Korean males and Korean females. But in the Class III group, there was no significant difference in the mandibular dental arch size according to the two ethnic groups and genders. Conclusions: The majority of Koreans and Japanese in all the malocclusion groups exhibited square and ovoid arch forms. The most frequent arch forms found in Koreans was square but ovoid for Japanese.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.481-487
• /
• 2004

The purpose of this study was to clarify morphologic characteristics between mandibular clinical arch forms in Koreans with normal occlusions. The study included data from 102 Koreans. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The dental arches were classified into ovoid, square and tapered forms. The frequency distributions of the three mandibular arch form classifications were determined and compared between male and female subjects. No significant differences in arch form size were found between the sexes. However, there were a few differences in molar width. It was useful to classify mandibular clinical arch forms present in normal occlusion samples into ovoid, square and tapered categories. The frequency of the ovoid form was the highest, and that of the square form was the second highest. The tapered arch form was found in less than 10 percent of subjects. No significant differences in their frequency distributions and dimensions were shown between males and females.

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.93-106
• /
• 1987

The purpose of this study was to investigate the fittness of Golden relation items was advocated by Ricketts whether or not it is applicable to the young adult Korean dentitions and also to evaluate the several new Golden relation items conducted by the author. The material was consisted of 81 dental casts (34 male, 47 female) with ideal occlusion, which never undergone orthodontic, prosthodontic procedures. Measurements were made on the arch dimensions using sliding caliper (Mitutoyo. Co) and data were computerized and analyzed. The findings of this study were as follows, 1. The Golden proportion advocated by Ricketts dose not seem to directly applicable to the Korean normal dentition, however, the modification from the Ricketts' original shows the Golden proportion as follow: A first series of progressive Golden relations was found on the Golden ratio among the lower central incisors width, the inter mesioincisal width of the upper lateral incisors, and the upper first premolars width. A second series was found on the Golden ratio among the lower lateral incisors width, lower inter canine tips width and theupper first molar distal cusp tips width. A third series was found on the Golden ratio between the inter distal aspect width of e lower canine and the mesial cusp tips width of the lower second molars or inter cusp tips width of upper second premolars. 2. In addition to Ricketts' original, 4 new Golden proportions were found in young adult Korean dentition, these are as follows; The tips of lower canine width had Golden relation with the width of the upper first premolar buccal cusp tips or the width of the lower first molar central fossae. The distal aspect of the lower first premolars had Golden relation with the buccal surface widths of the lower or upper second molars. The width of upper lateral incisors had Golden relation with the upper second molar height. The width of the lower canine tips had Golden relation with the lower second molar height.

• The Journal of the Korean dental association
• /
• v.53 no.7
• /
• pp.450-456
• /
• 2015

Even the adult cleft lip and palate patient who has not had timely treatment during the growth period, can be treated with orthodontic treatment without the necessity of orthognathic surgery if only the patient is treated under correct diagnosis and fitting appliances. Initially, maxillary arch form is established by constructing trifocal circles. Posterior region can be expanded and derotated laterally with pentahelix and anterior teeth are aligned with Tiggle brackets and "ㄷ"-shaped spring. Thereafter, anterior and posterior regions are consolidated. Mandibular intercanine width should be adjusted to maxillary intercanine width which was unavoidably reduced. Mandibular anterior tooth extraction will be helpful to attain proper mandibular intercanine width and better anterior dental showing.