• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.172-181
• /
• 2018

Objective: This study was performed to investigate buccal facial depth (BFD) changes after extraction and nonextraction orthodontic treatments in post-adolescent and adult female patients, and to explore possible influencing factors. Methods: Twelve and nine female patients were enrolled in the extraction and nonextraction groups, respectively. Changes in BFD in the defined buccal region and six transverse and two coronal measuring planes were measured after registering pretreatment and posttreatment three-dimensional facial scans. Changes in posterior dentoalveolar arch widths were also measured. Treatment duration, changes in body mass index (BMI), and cephalometric variables were compared between the groups. Results: BFD in the buccal region decreased by approximately 1.45 mm in the extraction group, but no significant change was observed in the nonextraction group. In the extraction group, the decrease in BFD was identical between the two coronal measuring planes, whereas this differed among the six transverse measuring planes. Posterior dentoalveolar arch widths decreased in the extraction group, whereas these increased at the second premolar level in the nonextraction group. The treatment duration of the extraction group was twice that of the nonextraction group. No differences were found in BMI and Frankfort horizontal-mandibular plane angle changes between the groups. BFD changes in the buccal region moderately correlated with treatment duration and dental arch width change. Conclusions: BFD decreased in adult female patients undergoing extraction, and this may be influenced by the long treatment duration and constriction of dentoalveolar arch width. However, nonextraction treatment did not significantly alter BFD.

• Imaging Science in Dentistry
• /
• v.48 no.4
• /
• pp.255-259
• /
• 2018

Purpose: This study proposes a new ball-type phantom for evaluation of the image layer of panoramic radiography. Materials and Methods: The arch shape of an acrylic resin phantom was derived from average data on the lower dental arch in Korean adult males. Metal balls with a 2-mm diameter were placed along the center line of the phantom at a 4-mm mesiodistal interval. Additional metal balls were placed along the 22 arch-shaped lines that ran parallel to the center line at 2-mm buccolingual intervals. The height of each ball in the horizontal plane was spaced by 2.5 mm, and consequently, the balls appeared oblique when viewed from the side. The resulting phantom was named the Panorama phantom. The distortion rate of the balls in the acquired image was measured by automatically calculating the difference between the vertical and horizontal length using $MATLAB^{(R)}$. Image layer boundaries were obtained by applying various distortion rate thresholds. Results: Most areas containing metal balls (91.5%) were included in the image layer with a 50% distortion rate threshold. When a 5% distortion rate threshold was applied, the image layer was formed with a small buccolingual width along the arch-shaped center line. However, it was medially located in the temporomandibular joint region. Conclusion: The Panorama phantom could be used to evaluate the image layer of panoramic radiography, including all mesiodistal areas with large buccolingual width.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.106-115
• /
• 2023

Objective: To evaluate the null hypothesis that there is no difference in a set of clinical predictors of potentially impacted canines between low-risk patients with and without displaced canines. Methods: The normal canine position group consisted of 30 patients with 60 normally erupting canines ranked in sector I (age, 9.30 ± 0.94 years). The displaced canine group comprised 30 patients with 41 potentially impacted canines ranked in sectors II to IV (age, 9.46 ± 0.78 years). Maxillary lateral incisor crown angulation, inclination, rotation, width, height, and shape, as well as palatal depth, arch length, width, and perimeter composed a set of clinical predictors, which were evaluated on digital dental casts. Statistical analyses consisted of group comparisons and variable correlations (p < 0.05). Results: There was a significant association between sex and mesially displaced canines. Unilateral canine displacement was more prevalent than bilateral displacement. The crown of the maxillary lateral incisors was significantly angulated more mesially and rotated mesiolabially in low-risk patients with displaced canines, who also had a shallower palate and shorter anterior dental arch length. Lateral incisor crown angulation and rotation, as well as palatal depth and arch length, were significantly correlated with the canine displacement severity. Conclusions: The null hypothesis was rejected. Maxillary lateral incisor angulation inconsistent with the "ugly duckling" stage as well as a shallow palate and short arch length are clinical predictors that can significantly contribute to the early screening of ectopic canines in low-risk patients.

• The korean journal of orthodontics
• /
• v.14 no.1
• /
• pp.127-134
• /
• 1984

The purpose of the present study was to investigate the correlations of malocclusion between the mother and the offspring and thus heritable features from mother to her offspring. Dental impression was taken of the both jaws of 73 mothers and their sons and 109 mothers and their daughters, and the measurement was obtained from the models. The correlation coefficient of the mesio-distal diameters of teeth and that of occlusion and arch variable was calculated from the mesurement. After the data was analyzed and estimated, the following results were obtained : 1. It was evident that the tooth size of the offspring was influenced from their mother. 2. It was evident that the occlusion, the arch size and shape of the offspring were influenced from their mother. 3. There was not the marked difference between the heredity of occlusion variable and arch variable on the mother-offspring relationship. 4. The correlation of the lower intercanine width and the lower available space discrepancy between the mother and the offspring were greatly influenced with the environmental factor.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.214-219
• /
• 2019

Purpose: The aim of this study was to evaluate the correlation between inter-condylar width and inter-maxillary first molar width to present the criteria for prosthetic reconstruction of dental arch width in maxillary and mandibular fully edentulous patients. Materials and Methods: 120 Koreans (60 males and 60 females) who underwent the cone beam computerized tomography (Cone-beam CT) were selected. The Cone-beam CT images were analysed using Invivo 5.1. After reorientation of axis, inter-maxillary first molar width was measured by clicking both mesio-buccal cusp tip of maxillary first molar. And inter-condylar width was measured by clicking both middle points of condyles. The collected data were analysed with SPSS Version 20.0 and statistical significance of the correlation between inter-condylar width and inter-maxillary first molar width was verified by Pearson's correlation analysis. Results: The mean inter-condylar width of Korean was 105.9 mm, and that of male (108.3 mm) was statistically significantly wider than the female (103.4 mm). The inter-maxillary first molar width of Korean was 57.1 mm, and that of male (57.9 mm) was statistically significantly wider than the female (56.2 mm). Pearson's correlation analysis between inter-condylar width and inter-maxillary first molar width showed a Pearson correlation coefficient of 0.614 and statistically significantly positive correlation. Conclusion: Intercondylar width and inter-maxillary first molar width showed positive correlation and the average ratio of inter-condylar with and inter-maxillary first molar width was 1:0.54. Based on the results of this limited study, inter-condylar width can be used as a guide for setting up dental arch width in fully edentulous patient.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.470-486
• /
• 2015

Two-arch tunnels require minimal spacing between the 2 tunnels and thus occupy small amount of land compared to parallel tunnels. But it is rather expensive. The parallel tunnel is not as expensive, but it requires more land than 2-arch tunnels. This may cause a problem when there is a land shortage. The new design is to connect these two types of tunnels by another pair of parallel tunnels where the separation distance is gradually increasing. The applicability of this new design to the cases where rock condition is not even fair has to be verified since the width of the pillar between the connecting tunnels can be quite narrow. Therefore both two and three dimensional numerical analyses were conducted and pillar stability was examined for rock classes IV and V in two different ways. Results showed that this new design is still effective for poor rock conditions if central pillar is properly reinforced by tension bolts as long as overburden is less than five times of the tunnel diameter.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.3
• /
• pp.247-260
• /
• 2002

This paper presents the design case of the 3-arch tunnel under Daejeon railroad station building. The original construction method was the underpinning method supported by pipe-roof, but it was changed to the mined tunnelling method because of the complex construction condition and the safety problem. This 3-arch tunnel has a width of 28 meters and a height of 10 meters. Overburden is only 23m and the ground around the tunnel is a weathered rock. The allowable settlements for the station building and some railroads are very strict. Accordingly, various measurements for the tunnel stability and the settlement minimization was applied and they were reviewed by 2-D and 3-D numerical analysis.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.288-296
• /
• 2011

Objective: The purposes of this study were to evaluate the relationship between the dental and basal arch forms; to analyze their differences in the tapered, ovoid, and square arch forms in normal occlusion by using three-dimensional (3D) virtual models; and to test the hypothesis that the overjet and maxillomandibular basal arch width difference have a significantly positive correlation. Methods: Seventy-seven normal occlusion plaster casts were examined by 3D scanning. Facial axis (FA) and WALA points were digitized using the Rapidform 2006 software. The dimensions of the dental and basal arches and the overjet were measured. The samples were classified into 3 groups according to arch forms: tapered (n = 20), ovoid (n = 20), and square (n = 37). Analysis of variance (ANOVA) was used to compare the dental and basal arch dimensions. The Pearson correlation coefficients between the intercanine as well as the intermolar widths at the FA and WALA points were calculated. Results: With regard to the basal arch dimensions, the tapered arch form showed a larger mandibular intermolar depth than the ovoid. Strong correlations were noted between the basal and dental intermolar widths in both the upper and lower arches (r = 0.83 and 0.85, respectively). Moderate correlation was found between the upper and lower intercanine widths (r = 0.65 and 0.48, respectively). Conclusions: The 3 dental arch form groups differed only in some dimensions of the skeletal arch. Moderate correlations were found between the basal and dental intercanine widths. These findings suggest that the basal arch may not be a principle factor in determining the dental arch form.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.84-90
• /
• 2006

The aims of this study were to investigate the prevalence of spaced, closed, and crowded primary dentitions by sex and arch in Korean children from Kanghwa, and to determine the frequency of the primate and developmental spaces. The differences in the mesiodistal crown diameters and the arch dimensions between the spaced, closed, and crowded primary dentitions were also evaluated. Dental casts of 102 preschool children (57 males and 45 females, aged $4{\sim}5$ years) were studied. The prevalence of spacing in the primary dentition was 63.2% In males and 57.8% in females. The frequency of spacing was greater in males than in females, and greater in the maxillary arch than in the mandibular arch. The crowns were significantly larger and the arches significantly narrower in closed and crowded dentitions than in those with spacing (p<0.05). The results showed that the prevalence of spacing was lower than that found in previous studies and the presence of spacing in the anterior region was related to the mesiodistal crown diameter and the intercanine width.

• Tunnel and Underground Space
• /
• v.23 no.2
• /
• pp.110-119
• /
• 2013

It is generalized to measure the arch settlement and convergence during tunnel construction for monitoring its mechanical stability. The initial convergence rate a day is defined from the first convergence measurement and the final convergence defined as the convergence measured lastly. The initial and the final tunnel arch settlement are defined like the preceding convergence. In the study, the relations between the initial and final displacements of a shallow tunnel are analyzed. The measurements were performed in the tunnel of subway 906 construction site in Seoul. The overburden is 10-20 m and the tunnel goes through weathered soil/rock. The width and height of the tunnel are about 11.5 m, 10m, respectively. So this is a shallow tunnel in weak rock. The length of tunnel is about 1,820 m and the tunnel was constructed in 2 stages, dividing upper and lower half. The numbers of measurement locations of arch settlement and convergence are 184 and 258, respectively. As a result, the initial displacement rate and the final displacement are comparatively larger in the section of weathered soil.