• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.104-117
• /
• 1991

자유표면을 가지는 유체에서 물체가 운동을 하게되면 물체와 자유표면의 교차점 주위에서 유제유동이 매우 급격해진다. 이 유동현상은 부유체의 운동에 따르는 유체유동, 탱크내에서의 슬로싱, 조파기 문제, 물체의 입수등 여러문제에서 발생된다. 이 유동은 교차점 주위에서 특이성을 가진다고 알려져 있었으나 Roberts(1987)는 물체의 운동이 충격운동이 아닐 경우에는 특이성이 존재하지 않는다는 것을 밝혔다. 본 논문에서는 표면장력을 고려하여 물체의 운동이 충격운동인 경우에도 특이성을 가지지 않는 해석해를 구하였고, 해의 특성을 조사하여 진동현상에 대한 임계치를 구하여 교차점에서 떨어진 거리가 이 임계치보다 작은 곳에서는 진동현상이 존재하지 않는다는 것을 밝혔다.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.320-334
• /
• 1996

Dental cast and die materials are essential material using in almost dental prsthodontic procedure and it's most important requirement is accuracy for reqorducing the oral anatomical structures. In this study, 5 abutments A, B, C, D, E were fabricated on the metal master model to simulate the arch form and specimens were poured with 4 cast materials. Inter-abutment distances, A-B, A-C, A-D, A-E, B-C, B-D were calculated using the photo-scanning and the deviations from the metal master model were also evaluated. The results were as follows; 1. The distance between A-B, A-C, A-D, A-E, B-C, B-D of the abutments A, B, C, D, E of each cast material was calculated. And after comparing the deviations between the metal master model. $Fujirock^{(R)}$ showed the lowest value with $0.20{\pm}0.22mm$, and the deviation increased in the order of $Suprastone^{(R)}$, Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. 2. In each calculation area, the difference in measurements between cast material and metal master model showed singificant difference between A-B and Cross arch measure-ments of A-D, B-D, A-E(p<0.05). 3. The difference in measurements between cast material and metal master model in the A-B area showed $Fujirock^{(R)}$ to be the lowest with $0.05{\pm}0.04$mm and increased in the order of Die $Keen^{(R)}$, $Suprastone^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and $Suprastone^{(R)}$, Epoxy $Die^{(R)}$ (p<0.05). 4. The difference in measurements between cast material and metal master model in the B-C area showed $Fujirock^{(R)}$ to bo the lowest with $0.17{\pm}0.11$mm and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Die $Keen^{(R)}$, Epoxy $Die^{(R)}$(p<0.05). 5. The difference in measurements between cast material and metal master model in the B-D area showed $Fujirock^{(R)}$ to bo the lowest with $0.13{\pm}0.07$mm, Epoxy $Dies^{(R)}$and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fuji-rock^{(R)}$ and Die Keen(p<0.05). 6. In this experiment, Epoxy $Dies^{(R)}$ showed mean contraction in every calculation area. And when reconstruction cross arch restorations it is thought that distortion should be considered in every cast material.

• 대한치과보철학회지
• /
• 제51권1호
• /
• pp.33-38
• /
• 2013

교합평면은 시상면적인 치열궁 형태를 나타내는 것으로, 악구강계를 구성하는 요소의 하나인 교합을 형태적으로 구성한다. 본 증례에서는 생체의 정중 시상면에 대한 수평, 측방좌표를 교합기상에 재현하여 상하악 치아 및 결손부 치조제에 대한 좌우 동적인 위치관계 얻기 위해 Shilla system (Hamans, Tokyo, Japan)을 이용하여 교합평면을 재구성 하였다. 본 증례의 환자는 41세의 남자 환자로 상악 전치부 10본금속-도재 고정성국소의치 파절 및 탈락과 전반적인 치료를 주소로 내원하였다. 임상 검사, 방사선 검사, 모형분석을 통해 임플란트 식립을 동반한 완전구강회복술을 하기로 결정하였다. Gothic Arch device (Centrofix; AmannGirrbach GmbH, Germany)를 이용하여 악간관계를 채득하고 마운팅 후, Shilla system을 이용하여 기존 교합평면을 평가, 분석하여 진단 납형을 제작하였다. 이를 토대로 방사선 스텐트를 제작하여 임플란트 식립하였고, 진단 납형을 이용하여 임시수복물을 제작하였다. 임시 수복물의 형태 및 교합 양식을 재현하기 위해 맞춤 전방유도판을 제작하고, 교차 마운팅을 시행하였으며 최종 수복물은 지르코니아 코핑을 이용한 완전 도재관으로 제작하였다. 이상과 같이 전악수복환자에서 진단과 치료 과정에서 Shilla system을 이용하여 적절한 심미적, 기능적 수복 결과를 얻을 수 있었다.

• 한국실내디자인학회논문집
• /
• 제14권3호
• /
• pp.114-121
• /
• 2005

Louis 1. Kahn was a wise architect who learned from history. He developed his own unique architecture by combining his creative sense with design principles and vocabularies that can be found in historical architecture. When restricting a space, he surrounded the space with thick walls as it had been done in historical buildings. The interior space encompassed by this method became a center-oriented and stable space. The objective of this study is to find the characteristics of Kahn's interior spaces by analyzing his projects in terms of space, form, daylight and materials. For this purpose, five works that are considered to have significance from the aspect of interior design were selected and analyzed. The characteristics realized through this study are as follows. A) Spatial features: 1) Generally speaking, each required space has been arranged symmetrically. 2) Being clearly defined as the main space, the subsidiary space, or the service space, each space also was placed very functionally. 3) The space encompassed by thick walls became a center-oriented, stable space. And in most case, it was characterized as a dark space. B) Formative features: 4) The space was defined as a basic solid such as a cylinder, a hexahedron, and an octagonal box, and was developed into a complex shape by the recessed windows. 5) Historical vocabularies such as an arch, a vault, and a dome were reinterpreted in new ways by kahn's own eyes. 6) Haying diverse shapes, the skylights enrich the space in terms of form. C) Daylight feature: 7) The vertical light entering through the skylights creates a solemn and mysterious atmosphere. 8) Given the shadows from the windows that change according to time, the interior space becomes a very vivid space. D) Material feature: 9) Harmonized with cold and smooth materials such as exposed concrete, metal, and glass, the interior space provides a modern atmosphere. 10) Warm appearing wood was used for furniture and part of walls or floors. The effective use of wood takes on a role that is quite complementary to the cold ambience of the smooth and cold materials. 11) With flexibility In building shapes, the concrete becomes the form-endowing materials.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.150-157
• /
• 2009

In the 1970's the Interior Design Associations was established and the activity of youth designers who werecalled the "first generation of Korean interior designers" were created. This study is aimed to analyze characteristics and trends of commercial interior design in the 1970's. The design methods include the documentary research and the actual proof research conducted. The frames of analysis were made by the background theories about Korean interior design, and the annual case studies were analyzed and estimated according to the design types. The design types were analyzed by the geometrical simplicity research, the romantic emotional expression, the Korean identity expression, the machine technical asthetic expression and the eclectic style with western classics. In the early 1970's, the abstract, brief, and simple expression were presented most frequently by the geometrical form and the repetition of the pattern. From the mid-1970's the romantic and emotional atmosphere of the youth culture that was popular at that time were expressed as vernacular design by the rough finishing of the natural materials such as plaster, brick, and wood floorings etc. The space such as a Korean food restaurant relates to the Korean traditional culture aims to be different through the expression by the Korean traditional patterns, furniture, and materials. In the late 1970's the metals and glass were used for the expression of the machine aesthetic form but was not popular because of the rare application. The type that revived the past western traditional form was presented by using the arch, dome, and the curved and luxurious moldings.

• 대한치과교정학회지
• /
• 제30권5호
• /
• pp.565-578
• /
• 2000

한국인의 치열의 특성을 고려한 Straight-Wire Appliance(SWA)의 제작을 위한 자료를 얻기 위하여 18세 이상 25세 사이의 한국인 성인 정상교합자를 1) 구강악안면부에 기능장애가 없고, 2) 양호한 치열궁 형태와 긴밀한 구치부 교합관계를 가지며, 3) 교합이 전후방적으로 앵글 분류 I 급의 관계를 가지며, 4) 간단한 수복 치료 외에 교정치료나 보철치료를 받지 않았으며, 특히 치아의 순면과 협면의 형태에 변형을 초래한 치과 치료를 받지 않았으며, 5) 단정한 안모를 가진 자를 선발 기준으로 정하여 선발하였다. 선정된 정상 교합자의 상, 하악 인상을 채득하고, 교정용 석고 모형을 제작하였다. 얻어진 치과 석고모형을 분석하여, Andrews의 Six keys to optimal occlusion에 부합되는 표본을 5 명의 숙련된 교정의사들이 선별하여 한국인 성인 정상교합자 치열의 석고 모형 155쌍(남자 92쌍,여자 63쌍)을 얻었다. 이들을 대상으로 정밀측정장비인 Coordinate Measuring Machine(CMM, MPC802, WEGU-Messtechnik, Germany)을 이용하여 3차원 digitization을 시행하고, 계측프로그램을 작성하여 SWA 제작을 위하여 필요한 Angulation, Inclination, In-and-Out, Molar offset angle, Arch-form 등을 측정하였다. 측정을 시행하기 전에, CMM을 이용한 3차 원 digitization의 오차에 대한 검증을 실시하였고, 3차원 digitization과 컴퓨터를 이용한 형태학적 분석법과 기존의 수작업에 의한 분석법의 신뢰도에 대한 분석을 실시하였다. 이상의 연구를 통하여 얻은 결론은 다음과 같다. 1. 치과 석고모형의 3차원 digitization에 CMM을 적용하여 mesh size 0.25 mm, 0.5 mm, 1.0 mm로 등간격 디지타이징하는 것은 모두 받아들일 수 있으며, 측정의 효율성을 고려할 때 1.0 mm간격으로 등간격 디지타이징 하는 것이 바람직하다. 2. 3차원 digitization과 컴퓨터를 이용한 방법이 Andrews의 방법에 기반한 수작업 방법보다 신뢰성이 높다. 3. 3차원 digitization과 컴퓨터를 이용한 방법으로 한국인의 치열의 형태학적 특성에 맞는 SWA의 제작을 위한 자료를 채득하였다.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.753-768
• /
• 1995

For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.

• 대한장애인치과학회지
• /
• 제9권2호
• /
• pp.122-126
• /
• 2013

14세 남환이 정기검진을 위해 내원하여 임상 구강검사 결과 상악 전치의 돌출과 상악궁 협착이 관찰되었다. 환아는 뇌성마비를 가지고 있었으나 간단한 설명을 이해하고 쉬운 지시를 수행할 수 있었으므로 가철성 장치를 이용한 교정치료를 시도하였다. 단계적이고 주의 깊은 접근을 통해 상악궁 협착 해소 및 상악 전치의 돌출을 완화할 수 있었다. 뇌성마비 환아의 경우 특징적으로 상악 전치의 돌출이 흔히 나타나는데, 이는외상의 위험에 쉽게 노출된다. 하지만 뇌성마비 환아에서 나타나는 특징적인 반사, 침 흘리기 습관, 행동조절의 어려움 등을 이유로 많은 임상의들이 교정 치료를 포기하게 된다. 적절한 환자 선정과 수행 가능한 치료목표를 세운다면, 뇌성마비 환아에서도 단계적이고 반복적인 행동조절과 약물을 이용하여 치료가 가능하다. 교정 치료를 통해 얻어진 상악 전치의 돌출 완화는 외상의 위험성을 줄이고 더 나은 심미성을 제공하는 긍정적인 효과를 가져오게 된다. 따라서 임상의들은 뇌성마비 환아의 치료에 대한 인식 변화 및 개선을 위한 적극적인 노력이 필요할 것이며, 뇌성마비 환아들은 더 나은 구강 건강을 영위할 수 있을 것이다.

• Imaging Science in Dentistry
• /
• 제46권3호
• /
• pp.203-210
• /
• 2016

Purpose: The purpose of this study was to investigate appropriate contrast reference values (CRVs) by comparing the contrast in phantom and clinical images. Materials and Methods: Phantom contrast was measured using two methods: (1) counting the number of visible pits of different depths in an aluminum plate, and (2) obtaining the contrast-to-noise ratio (CNR) for 5 tissue-equivalent materials (porcelain, aluminum, polytetrafluoroethylene [PTFE], polyoxymethylene [POM], and polymethylmethacrylate [PMMA]). Four panoramic radiographs of the contrast phantom, embedded in the 4 different regions of the arch-form stand, and 1 real skull phantom image were obtained, post-processed, and compared. The clinical image quality evaluation chart was used to obtain the cut-off values of the phantom CRV corresponding to the criterion of being adequate for diagnosis. Results: The CRVs were obtained using 4 aluminum pits in the incisor and premolar region, 5 aluminum pits in the molar region, and 2 aluminum pits in the temporomandibular joint (TMJ) region. The CRVs obtained based on the CNR measured in the anterior region were: porcelain, 13.95; aluminum, 9.68; PTFE, 6.71; and POM, 1.79. The corresponding values in the premolar region were: porcelain, 14.22; aluminum, 8.82; PTFE, 5.95; and POM, 2.30. In the molar region, the following values were obtained: porcelain, 7.40; aluminum, 3.68; PTFE, 1.27; and POM, - 0.18. The CRVs for the TMJ region were: porcelain, 3.60; aluminum, 2.04; PTFE, 0.48; and POM, - 0.43. Conclusion: CRVs were determined for each part of the jaw using the CNR value and the number of pits observed in phantom images.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권2호
• /
• pp.200-207
• /
• 1996

In patients with unilateral condylar hyperplasia, increased length of the condylar neck causes deviation of the mandible to the opposite site, resulting in facial asymmetry, but the arch form and general contour of the displaced mandible is approximately symmetric. So, the unilateral condylectomy have been prefered surgical method among the surgeons. The purpose of this study is to analyze the postoperative results comparatively following two different surgical methods, condylectomy and ramus surgery, in unilateral condylar hyperplasia. Case of 6 patients with the unilateral condylar hyerplasia were analyzed in this study, 3 case of the condylectomy only, 3 cases of the ramus surgery, Clinical and radiographic evaluations were tried for comparison. In conclusion, comparative results between two groups did not show any significant difference, but we confirmed that unilateral condylectomy could be a excellent surgical methods in unilateral condylar hyperplasia thinking over the unique morphological characteristics of it.