• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.59-63
• /
• 2014

Object of this study is to see whether the arc-groove on a D-shape bluff body effects the drag reduction or not. To this end, the changes of the boundary layer on the surface of the object, the downstream flow field and wake flow were found by experiments. The experiments are conducted by changing number and depth of the groove, angle of the first groove and Reynolds number(Re). Groove did not effect on the surface in the downstream boundary layer of the object and was minimal impact on the time mean velocity recovery of the wake flow. Also the effects of Groove did not have a significant impact on the structure of the wake and the wake frequency. Therefore it is found that the arc-groove of the drag reduction effect on the D-shape bluff body was smaller.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 1996.06a
• /
• pp.79-109
• /
• 1996

In order to transform the underground utility data into the 3-D spatial objects, this thesis defined the type of the 3-D spatial objects and the storage structure of objects, and developed the spatial data transformation system that transforms the 2-D underground utility data into the pre-defined 3-D spatial objects through the Booch Method, an object-oriented development method. For this sake, the relational data model of ARC/INFO and the storage structure are analyzed, as well as the pre-requisites, required for the 3-D visualization of the underground utilities. Also, the 2-D underground utility data, saved in ARC/INFO, were transformed into the ASCII files through the internal pre-processing procedure, then used as the input data of the transformation system. In addition, to develop the transformation system, the object-oriented development methods are studied first and, then, applied to the system analysis and the design procedure with the Booch Method as a development method. Finally, the results of analysis and design procesure are implemented through AML, a ARC/INFO macro language, and C++, an object-oriented programing language. As a result of this study, the 3-D spatial objects that can visualize the 2-D utilities in 3-D, are acquired, and the adaptation of object-oriented development method to the system development procedure enabled an effective development prodedure.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.53-57
• /
• 2006

현재, 많은 분야에서 데이터 모델링을 지원하는 GIS관련 프로그램으로 ArcObject 컴포넌트를 제안하고 있다. 특히 수자원분야에서 유역과 하천네트워크의 정확하고 효과적인 표현을 위해 ArcHydro Model이 개발되었으며 다양한 분야에서 활용되고 있다. 본 연구에서는 안성군 고삼면의 안고용수구역을 대상으로 ArcHydro Model을 이용하여 관개 네트워크를 구성하기 위해 유역경계, 하천망, 수리시설물의 위치도, 수혜구역도 등의 기본 공간자료들을 구축하고, 이 자료들을 이용하여 수리시설물에 따른 수혜구역을 가시적으로 확인가능하도록 하기 위해 하천의 위상관계를 정립하고 공간자료간의 연계성을 구성하였다. 또한 수리시설물의 농업용수 수요공급량의 정량적인 정보를 획득하기 위하여 ArcHydro Model에 한국농촌공사에서 개발한 AWDS (Agricultural Water Demand and Supply Estimation System. 농촌용수 수요공급량 시스템)와 연계하고, 시설물정보, 수요량분석, 공급량분석을 할 수 있는 메뉴를 구성하여 그 정보를 획득하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.840-843
• /
• 2016

The circular arc is a very useful feature for object detection and recognition in industrial environments. In this paper, a new method to detect circular arcs is proposed. The detection of the circular arc includes the estimation of the center, the radius and the two ending points of the arc. This new method is based on determining the best part of the circular arc (part which does not contains outliers points) using 3 points designated along the arc. A least square method is applied to the best part of the arc and the center and the radius of the arc are obtained. The distance between the remaining edge's points (points which are not lying on the best part of the arc) and the radius is used to the two ending points of the arc.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2002

We developed a modeling and visualization software that can analyze 3-dimensional spatial information in the ArcView environment. The software constructs and visualizes an object in 3 dimensional space from the input data given a number of horizontal cross-sections. The software can generate and visualize the cross-sections of the object in any azimuth and inclination. Utilizing the program users can modify the 3-D shape of the object by interactively editing the cross-sections.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.170-173
• /
• 2002

The object of this study is to investigate the effect of compounded welding through the AE (Acoustic Emission) characteristics on static tensile test. This study was carried out a SM 490A, high tension steel using the low hydrogen type E4316 of electronic shield metal arc welding and compound wire of $CO_2$gas arc welding. $CO_2$welding, weak in the intensity of HAZ (Heat Affected Zone), can be improved by being combined with coated arc welding, Coated arc welding, weak in the intensity of the bead, can be improved by being combined with $CO_2$welding. Especially, electronic coated arc welding and $CO_2$welding complement the mechanical intensity of HAZ and the bead with each other. So, compounded welding increases the intensity in the special parts and enhances the quality of goods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1294-1303
• /
• 2009

This paper presents a new numerical algorithm for fault discrimination and fault location estimation when occur to arcing ground and arcing line to line on transmission lines. The object of this paper is developed from new numerical algorithm to calculate the fault distance and simultaneously to make a distinction between transient and permanent faults. so the first of object for propose algorithm would be distinguish the permanent from the transient faults. This arcing fault discrimination algorithm is used if calculated value of arc voltage amplitude is greater than product of arc voltage gradient and the length of the arc path, which is equal or greater than the flashover length of a suspension insulator string[1-3]. Also, each algorithm is separated from short distance and long distance. This is difference to with/without capacitance between short to long distance. To test the validity of the proposed algorithms, the results of algorithm testing through various computer simulations are given. The test was simulated in EMTP/ATP simulator under a number of scenarios and calculate of algorithm was used to MATLAB.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.54-68
• /
• 2001

This paper proposes a new algorithm that detects and separates the occluding and occluded objects in a 2D image. An input image is represented by the attributed graph where a node corresponds to a surface and an arc connecting two nodes describes the adjacency of the nodes in the image. Each end of arc is weighted by relation value which tells the number of edges connected to the surface represented by the node in the opposite side of the arc. In attributed graph, homogeneous nodes pertained to a same object always construct one of three special patterns which can be simply classified by comparison of relation values of the arcs. The experimental results have shown that the proposed algorithm efficiently separates the objects overlapped arbitrarily, and that this approach of separating objects before matching operation reduces the matching time significantly by simplifying the matching problem of overlapped objects as the one of individual single object.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.1-12
• /
• 2008

This study was to develop the analyzing system for watershed characteristics data. The developed system has laid the foundation for preparing the input data in various hydrological models. The algorithms and items included in the system were derived from benchmarking of the GIS WEASEL, which used to prepare the input data of PRMS (Precipitation-Runoff Modeling System). The system was designed to develop and maintain the organized system using both object-oriented UML (Unified Modeling Language) and GIS component-based ArcObjects.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.94.1-94
• /
• 2001

Arc sensor gives important groove information during welding. Automatic seam tracking control system with arc sensor has significant characteristics such that bead formation is given as decentralization of penetration and formation of concave bead profile and that a turning point of transverse weaving with constant arc length control is decided whether or not torch height reaches to a specified setting level. Furthermore, the rotating action of the arc prevents hanging of weld bead and forms flat bead surface under high speed welding condition. The variation of groove and deposition area can be detected from the trace of weaving. The area and width of weaving trace has close correlation with the area of groove and deposition. In this paper, main object of this system is to realize an adaptive microprocessor based controller ...