• Proceedings of the Korea Database Society Conference
• /
• 1997.10a
• /
• pp.407-424
• /
• 1997

지리정보 시스템에 기반한 응용 시스템 개발에 있어 필수적인 기능으로 지도작성, 데이타 관리, 해석 기능 외에 지식 표현 및 추론 기능을 들 수 있다. 본 논문에서는 지식베이스 관리 및 연역 추론 기능을 갖는 지식기반 지리정보 시스템의 개발과 연역 기능을 활용한 시스템 기능 확장에 대하여 논한다. 본 시스템에서는 사용자 인터페이스(Visual Basic), 지리정보 시스템(ArcView, ArcInfo), 추론 시스템(Eclipse)을 상호 밀결합 방식으로 결합, 구현하였으며, 각 서브 시스템은 서로 중간 파일 시스템의 사용없이 데이타 및 명령어의 전송 및 공유가 가능하다. 또한 사용자는 사용자 인터페이스를 통하여 개개의 서브 시스템을 인식하지 않고 단일화된 환경하의 작업이 가능하다. 시스템의 연역 기능은 일반적으로 거론되는 지식베이스 관리, 의사결정 지원 기능 외에도 사용자 환경개선, 복합 공간 객체의 표현, 공간질의 연산자 구현 등의 시스템 기능 확장에 활용될 수 있다. 특히 본 시스템에서는 사용자 환경 개선에 초점을 맞추어 사용자가 정보의 내부 구조나 문제 영역, 명령어 사용 방법 등을 잘 알지 못하더라도 유용한 정보를 얻도록 지원, 유도하는 협력질의 응답 기능과 명령어 자동 생성 기능을 제공한다. 또한 본 논문에서는 이들 방식을 이용한 두가지 응용 시스템(여행정보 시스템, 환경관리 시스템)의 구현 예를 들어 본 시스템의 실용성과 유용성을 보인다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.273-276
• /
• 2002

Watershed boundary and stream network can be extracted from DEM(Digital Elevation Model) using GIS software such as ARC/INFO or ArcView Spatial Analyst. However, there exist many errors in the generated watershed boundary and stream network just by operating sink removal function of the present software. This paper present the error reducing method to delineate watershed boundary and generate stream network especially in plane areas by using stream burning techniques known as Fillburn and Agree bum. These preprocessing techniques of DEM dramatically decreased the errors comparing with the results by no-bum DEM.

• Tribology and Lubricants
• /
• v.8 no.1
• /
• pp.63-69
• /
• 1992

In order to gain better understanding of wear behaviors of TiN-coated boron cast iron, tests and analyses were conducted with block-on disc type tribometer. TiN layer of thickness $2 \mu m$ and $4 \mu m$, coated by cathodic arc evaporation process, were experimentally investigated with the variation of applied load and sliding speed under dry sliding condition. Wear characteristics were expressed in terms of the three-dimentional wear map as well as the wear rate vs sliding speed and load. Comparisons of wear and friction characteristics between coated cast irons and uncoated cast irns were also made. Wear mechanism of TiN layer was explained in view of surface interaction between the mating surfaces. The thicker coating exhibited higher hardness and adhesion strength. the significance of stresses at the surface and in the subsurface was briefly discussed in relation to the wear behavior.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.1 s.6
• /
• pp.57-66
• /
• 1996

For the effective use of spatial data, it is necessary to translate the diverse digital map data (here, digital map for car navigation system) into common GIS data structure(here, ARC/INFO). For this purpose, analysis on the structure of the established digital map was fulfilled, the data model for effective translation tool was designed. As a result, the possibility to translate diverse digital map structures (database) into GIS tools and to share them, with the users' point of view, was successfully verified.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.260-264
• /
• 1998

Three phase Boost/Buck converter which have economical merits and simple control scheme, are analyzed and evaluated through comparative methods and digital simulation for equivalent load. Those play a part of voltage boost/buck as well as power factor correction with single switch. Controller operating in constant and variable frequency is used for rapid output response and stable system condition respectively. Moreover low THD property of single switched converters is available for inverter arc welding machine known as high power and low power factor. So, in this paper a comparison of the characteristics in boost and buck converter is described and then simulation results conforms the merits from point of view of power factor and voltage regulator.

• The Journal of Information Technology and Database
• /
• v.4 no.1
• /
• pp.3-17
• /
• 1997

지리정보 시스템에 기반한 응용 시스템 개발에 있어 필수적인 기능으로 지도작성, 데이터 관리, 해석 기능 외에 지식 표현 및 추론 기능을 들 수 있다. 본 논문에서는 지식베이스 관리 및 연역 추론 기능을 갖는 지식기반 지리정보 시스템의 개발과 연역 기능을 활용한 시스템 기능 확장에 대하여 논한다. 본 시스템에서는 사용자 인터페이스(Vusual Basic), 지리정보 시스템(ArcView, ArcInfo), 추론 시스템(Eclipse)을 상호 밀결합 방식으로 결합, 구현하였으며, 각 서브 시스템은 서로 중간파일 시스템의 사용없이 데이터 및 명령어의 전송 및 공유가 가능하다. 또한 사용자는 사용자 인터페이스를 통하여 개개의 서브 시스템을 인식하지 않고 단일화된 환경하의 작업이 가능하다. 시스템의 연역 기능은 일반적으로 거론되는 지식베이스 관리, 의사결정 지원 기능 외에도 사용자 환경개선, 복합 공간 객체의 표현, 공간질의 연산자 구현 등의 시스템 기능 확장에 활용될 수 있다. 특히 본 시스템에서는 사용자 환경개선에 초점을 맞추어 사용자가 정보의 내부 구조나 문제 영역, 명령어 사용 방법 등을 잘 알지 못하더라도 유용한 정보를 얻도록 지원, 유도하는 협력질의 응답 기능과 명령어 자동 생성 기능을 제공한다. 또한 본 논문에서는 이들 방식을 이용한 두가지 응용 시스템(여행정보 시스템, 환경관리 시스템)의 구현 예를 들어 본 시스템의 실용성과 유용성을 보인다.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.101-111
• /
• 1999

Compared with the BF slag, the EAF slag has expansion due to the reaction with water and free CaO. Therefore it is specified in Concrete Specification that the FAP slag aggregated must not be used in concrete. Because of this reason it is unusual to use the EAF slag aggregate in concrete. The EAF slag aggregate treated with accelerated and water aging was comparatively satisfied with fundamental properties, which are specific gravity, unit weight, abrasion and immersion expansion ratio, as concrete aggregate. Therefore when we measured the compressive strength till 28 days, we found that the mortar and concrete replacing the natural aggregate with the EAF slag aggregate by 4 steps had better results than the concrete using the natural aggregate in a view of the compressive strength. But at 91 days, concrete using the EAF slag aggregate had no difference with it using the natural aggregate.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.317-324
• /
• 2019

A high energy arcing fault event occurred in the medium-voltage (13.8 kV and 4.16 kV) metalclad switchgears in a nuclear power plant not only affecting switchgear but also connected equipment due to the arc energy. The high energy arcing fault also causes a fire that influences the safety function of the unit. Therefore, from the safety point of view, it is necessary to evaluate the influences of high energy arcing fault events on the safety functions of nuclear power plants. The purpose of this paper is to elaborate the characteristics of high energy arcing faults and propose a high energy arcing fault mitigation scheme for medium voltage networks in nuclear power plants.

• Bulletin of the Korean Mathematical Society
• /
• v.24 no.1
• /
• pp.13-17
• /
• 1987

Let S denote the class of nivalent functions normalized so that f(0)=f'(0)-1=0 in vertical bar z vertical bar <1. Let $S_{\alpha}$$^{*}$, -.pi./2<.alpha.<.pi./2, denote the subclass of S that satisfies Re $e^{i{\alpha}}$zf'(z)/f(z).geq.0 in vertical bar z vertical bar <1; then f is called .alpha.-spiral-like and the case .alpha.=0 is the class of normalized starlike functions [6, pp.52]. Let T denote the class of functions f normalized as above and satisfying Im z[Im f(z)]..geq.0 in vertical bar z vertical bar <1; then f is called typically real and T contains those functions of S whose coefficients are real [6, pp.55]. Also, in view of [6, pp.231], let B(.lambda.) be the class of function normalized as above and map vertical bar z vertical bar <1 onto the complement of an arc with radial angle .lambda.(0<.lambda.<.pi./2). The radial angle is meant to be the angle between the tangent and radial vectors to the arc. This note includes a sharp version for Corollary 1 of [2] when f.mem. $S_{\alpha}$$^{*}$ as well as a logarithmic coefficient estimate.nt estimate.

• Journal of the Korean Geographical Society
• /
• v.43 no.2
• /
• pp.235-252
• /
• 2008

Many cartographers have for many years searched for a way to construct cartograms in which the sizes of geographic areas such as states, counties or census tracts are reseated in proportion to their population or some other socio-economic properties. While many techniques and algorithms for creating cartograms have been proposed, some of them are still extremely complex to generate in a proper manner, and many of them suffer either from this lack of readability or from seamless integration with GIS software. This paper, therefore, presents a simple population cartogam technique based on the Circular Cartogram Algorithm(CCA) by Dorling(1996) to tackle these drawbacks by drawing the areas as simple circles for use as a base map and linking the construction with GIS mapping processes. For an automated approach in the cartogram generation, this paper proposes a close coupling method of ArcView GIS 3.3. package in order for users to access to the cartopam algorithm. Then, they will be available through an interface that the ArcView GIS system allows user-written routines to be accessed easily. The CCA and its coupling architecture ensure to improve the potential applicability of the use of cartograms to census mapping at practical levels. As the cartogram examples, cartograms of population and property types in 2005 Korea census data sets are illustrated in the end, by which viewers can easily identify the residential concentration and their relative ratio in Seoul metropolitan area.