• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.1-8
• /
• 2007

The objective of the present work is to characterize design parameters of solid propellant ignitor for composite, double base, and nitramine propellants using arc image furnace. Arc image furnace and fiber optics surface reflectometer were used to measure ignition delay time and reflected optical energy of several compositions of composite, double base and nitramine base rocket propellant at different pressure levels each other. The order of ignitability was double base > composite> nitramine propellants at initial pressure of over 75 psia. The highest ignition energy was needed to ignite nitramine propellant, however, the ignition delay time decreased abruptly as the pressure increased up to the range of $75{\sim}400$ psia. The absorbtion of radiation energy could be increased by the addition of small amount of opacifiers as carbon black, ZrC, WC and burning catalyst.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.161-171
• /
• 2008

Nowdays the need of modeling a real world using computers leads to increase the importance of GIS. Moreover, the wide spread of the Internet service has brought about Web GIS Development. Especially, the tuning of Web GIS system has a crucial role in improving the performance of high resolution image Web GIS system. Thus, this study provides a variety of ways to improve the performance of high resolution image Web GIS system. We have tuned IBM AIX operation system, Oracle, ArcSDE in the database level and Tomcat, ArcIMS in the application level. What is more, we propose ways of coding which can have a positive impact on performance. As a result, the proposed methods guarantee high resolution image Web GIS system to improve performance.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.151-161
• /
• 2006

This paper has a goal to construct monitoring web GIS system which displays maps that are results of the fire detecting algorithms using MODIS image. To design and build more efficient system, foreign fire monitoring systems using satellite image are researched and analyzed. As a result of that, the information about interfaces and services provided by them are obtained. In concretely, new logical DFD is used to do a process modelling. ArcIMS 4.0 of ESRI, IIS 5.1 of Microsoft are utilized to build the web GIS System. In the aspects of data input and transfer, a specific module, which converts a binary image to a kind of vector file, is developed to adjust raster data to the web GIS system.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.792-797
• /
• 2002

In the following paper two algorithms, suitable for the analysis of panchromatic data as provided by KOMPSAT-1 will be presented. One is a texture analysis which will be used to create a settlement mask based on the variations of gray values. The other is a fusion algorithm which allows the combination of high resolution panchromatic data with medium resolution multispectral data. The procedure developed for this purpose uses the spatial information present in the high resolution image to spatially enhance the low resolution image, while keeping the distortion of the multispectral information to a minimum. This makes it possible to use the fusion results for standard multispecatral classification routines. The procedures presented here can be automated to large extent, making them suitable for a standard processing routine of satellite data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1623-1629
• /
• 2003

In this paper, the arc beam is considered as a moving disc heat source with a pseudo-Gaussian distribution of heat intensity. The solution for temperature distribution on welds is derived by using the image heat source method and the superposition method. It is general solution in that it can determine the temperature-rise distribution in and around the arc beam heat source, as well as the width and depth of the melt pool (MP) and the heat-affected zone (HAZ) in welding short lengths, where quasi-stationary conditions may not have been established. As a comparative study, the results of this analytical approach has been compared with that of the finite-element modeling. As a result, The theoretical analysis presented here has shown good consistency and is more time/cost-effective method compared with FEM.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1299-1306
• /
• 2007

The combination of laser beam and electric arc sharing common weld pool has widely been investigated since the late seventies, but it is beginning of the industrial uses. Recently, laser-GMA hybrid welding process showed possibility to overcome the tight gap tolerance with improved productivity. The laser-arc hybrid welding process is inherently complex because it has three kinds of process parameters: arc welding, laser welding and hybrid welding parameters. In this study, the optimum range of the process parameters were determined by high speed image analysis which could unveil the welding phenomena in laser-arc hybrid welding. The laser-arc hybrid welding was applied for position welding from the flat position to the overhead position and the welding characteristics were investigated.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.6
• /
• pp.91-105
• /
• 2007

The Hough transform is a popular method for ellipse detection from image. But the method wastes time and memory space severely. And the existing methods for elliptical arc segmentation are very sensitive to noise or detect improper breakpoints. In this paper a fast method is proposed for the segmentation and detection of elliptical arcs from digital curve using its area. Experimental results show that the proposed method segments and detects elliptical arcs from noisy curves and the average of the distance errors between the fitted arc and given curve is within a threshold.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.28-34
• /
• 2010

This paper was described on investigation to prevent porosity in high speed MIG Welding of Al 6082-T6. Porosity measurement was carried out by using image analysis of micrographs with the help of an analysis software. The main parameter was arc length and torch progressive angle. The porosity ratio was increased as arc length was increased. The arc length was increased depending upon the output voltage. By proper selection of pulse waveform parameter, the stable arc of one pulse one drop was generated. The porosity ratio of optimum condition in one pulse one drop was lower than high voltage condition. When torch progressive angle was an angle of advance $10^{\circ}$, porosity ratio was minium.

• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.168-171
• /
• 1998

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.558-561
• /
• 2002

A CCD camera with a laser strip was applied to realize the automation of welding Process in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noise such spatter and arc light. The adaptive Hough transformation was used to extract the laser stripe and to obtain specific weld points In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.