• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.161-165
• /
• 2004

In this paper, we introduce the intuitionistic fuzzy circle with a pair of degree which are membership and nonmembership functions, and investigate the properties of them. And also we experiment with developing fuzzy geometry by limiting process of the notion of intuitionistic fuzzy circles which restricted the notion of fuzzy spheres in order to apply to 2-D image.

• Journal of the Optical Society of Korea
• /
• v.8 no.3
• /
• pp.108-114
• /
• 2004

To allow multiple viewers to see the correct perspective and to provide a singh1 viewer with motion parallax cues during head movement, more than two views arc needed. Since it is prohibitive to acquire, process, and transmit a continuum of views, it. would preferable to acquire only a minimal set of views and to synthesize intermediate images. This paper presents how to synthesize the intermediate images using irregular quadtree decomposition and compares the proposed methods with full-search block matching. The image at the middle viewpoint between both viewpoints is synthesized and yields a 32.8 ㏈ peak-signal-to-noise ratio (PSNR) which is 2.8 ㏈ high and has a running time 30% of that for conventional full-search block matching.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.157.1-157.1
• /
• 2013

외부 Ballast Capacitor를 이용한 Voltage Doubler 전원장치를 이용하여 Micro size의 대기압 플라즈마를 발생장치를 개발하였다. 2개의 외부 Capacitor를 병렬로 연결하여 충전한 다음 외부 Capacitor를 직렬로 연결하여 전압을 2배압 시킨 상태에서 방전이 일어나도록 하였다. Capacitor의 충 방전 제어는 Switch Device인 Insulated Gate Bipolar Transistor (IGBT)를 사용하였다. 개발된 대기압 플라즈마는 외부 Capacitor와 인가전압을 독립적으로 변화시킬 수 있기 때문에 방전 시 전류 전압을 독립적으로 제어할 수 있으며 용도에 따라 Glow 방전에서 Arc 방전까지 제어가 가능하다. 본 연구에서는 900 V의 1.22 nF 외부 Capacitor 방전과 400 V의 10 nF 외부 Capacitor 방전을 비교하였다. 방전 시 전압파형과 전류파형은 서로 다르지만 소비된 방전에너지는 340 ${\mu}J$로 동일하다. ICCD camera와 Spectrometer를 이용하여 비교 분석을 실시하였다. 방전 image 및 Optical Emission Spectroscopy 분석을 이용하여 플라즈마의 온도, 밀도 등을 시간적, 공간적으로 분석하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.301-306
• /
• 2008

A pyrogen igniter was designed to satisfy the required condition of kick motor system for the space launch vehicle. We analyzed the ignition characteristics and performed the combustion tests to verify the internal ballistic performance. In the design process, the arc-image test was carried out to find the sufficient heat flux as varying the initial pressure from 10 to 700kPa. The analysis indicated that the initial pressure condition would delay ignition time within a range from 100 to 500ms. The combustion test with an inert chamber was also performed to understand the ignition characteristics with the variation of the initial pressure of free chamber volume. Finally, we confirmed that the igniter could provide the acceptable energy to ignite the propellant of kick motor at the ground test. The result of the ground tests showed that the ignition delay time was within the design range at the atmospheric pressure condition.

• International journal of advanced smart convergence
• /
• v.10 no.1
• /
• pp.216-224
• /
• 2021

Aim of this research was to classify forest types at Wando in Jeonnam Province and develop warm temperate forest management system with application of Remote Sensing and GIS. Another emphasis was given to the analysis of satellite images to compare forest type changes over 10 year periods from 2009 to 2019. We have accomplished this study by using ArcGIS Pro and ENVI. For this research, Landsat satellite images were obtained by means of terrestrial, airborne and satellite imagery. Based on the field survey data, all land uses and forest types were divided into 5 forest classes; Evergreen broad-leaved forest, Evergreen Coniferous forest, Deciduous broad-leaved forest, Mixed fores, and others. Supervised classification was carried out with a random forest classifier based on manually collected training polygons in ROI. Accuracy assessment of the different forest types and land-cover classifications was calculated based on the reference polygons. Comparison of forest changes over 10 year periods resulted in different vegetation biomass volumes, producing the loss of deciduous forests in 2019 probably due to the expansion of residential areas and rapid deforestation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.789-792
• /
• 2010

최근 다양하게 활용되고 있는 수치지도 기반의 지도 영상은 그 신속성과 정확성이 가장 중요시되고 있다. 특히, 공군에서 사용하고 있는 지도영상 자료 활용 시스템인 비행 임무 계획 시스템의 상황도 시현 시, 대용량 래스터 데이터(Raster Data)를 처리해야 하는데, 지도의 종류가 다양해지고, 정밀해질수록 시스템의 효율적인 구동에 한계가 발생되고 있는 현실이며, 처리하는 영상의 호환성 및 왜곡현상의 문제점도 함께 야기되고 있다. 이에 본 연구에서는 ARC System 및 RPF Naming Rule을 적용하여 대용량 래스터 데이터 처리과정을 개선하고, 호환성을 보장하며, 왜곡현상을 줄이는 효율적인 지도 영상 처리방안을 제안한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.11a
• /
• pp.85-87
• /
• 2022

최근 CCTV 출입 기록, 휴대폰 보안, 스마트 매장 등에서 얼굴 인식을 통해 개인을 식별하는 기술이 널리 사용되고 있다. 카메라의 각도, 조명, 사람의 움직임 등 얼굴 인식에 많은 외부 환경이 영향을 미치고 있지만 그중에서도 실제 영상에서 얼굴이 차지하는 영역이 작아 저해상도 얼굴 인식에 어려움을 겪고 있다. 이러한 문제점을 해결하고자 본 논문에서는 이미지 해상도가 얼굴 인식에 끼치는 영향을 알아보고 이미지 초해상화를 통해 얼굴 인식 성능을 개선하고자 한다. 쌍선형, 양3차 회선 보간법과 딥러닝 기반의 이미지 초해상화 모델인 RCAN을 이용하여 업스케일링한 데이터셋에 대해 학습한 ArcFace를 통해 얼굴 검증 평가를 진행하였다. 고해상도 이미지는 얼굴 인식 성능을 향상시키며, RCAN을 사용한 이미지 초해상화가 보간법을 사용한 방법보다 더 좋은 성능을 보였다.

• Progress in Medical Physics
• /
• v.25 no.2
• /
• pp.65-71
• /
• 2014

A Varian Portal Dosimetry system was compared to an isocentrically mounted MapCHECK 2 diode array for volumetric modulated arc therapy (VMAT) QA. A Varian TrueBeam STx with an aS-1000 digital imaging panel was used to acquire VMAT QA images for 13 plans using four photon energies (6, 8, 10 and 15 MV). The EPID-based QA images were compared to the Portal Dose Image Prediction calculated in the Varian Eclipse treatment planning system (TPS). An isocentrically mounted Sun Nuclear MapCHECK 2 diode array with 5 cm water-equivalent buildup was also used for the VMAT QAs and the measurements were compared to a composite dose plane from the Eclipse TPS. A ${\gamma}$ test was implemented in the Sun Nuclear Patient software with 10% threshold and absolute comparison at 1%/1 mm (dose difference/distance-to-agreement), 2%/2 mm, and 3%/3 mm criteria for both QA methods. The two-tailed paired Student's t-test was employed to analyze the statistical significance at 95% confidence level. The average ${\gamma}$ passing rates were greater than 95% at 3%/3 mm using both methods for all four energies. The differences in the average passing rates between the two methods were within 1.7% and 1.6% of each other when analyzed at 2%/2 mm and 3%/3 mm, respectively. The EPID passing rates were somewhat better than the MapCHECK 2 when analyzed at 1%/1 mm; the difference was lower for 8 MV and 10 MV. However, the differences were not statistically significant for all criteria and energies (p-values >0.05). The EPID-based QA showed large off-axis over-response and dependence of ${\gamma}$ passing rate on energy, while the MapCHECK 2 was susceptible to the MLC tongue-and-groove effect. The two fluence-based QA techniques can be an alternative tool of VMAT QA to each other, if the limitations of each QA method (mechanical sag, detector response, and detector alignment) are carefully considered.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.976-980
• /
• 2018

The traction power system is configured to transmit electricity to the vehicles through mechanical contact between the OCL (Overhead Contact Line) and the pantograph. The system measures the current collection performance of the OCL, or the OCL installation condition is examined through maintenance for commercial operation. Maintenance continues to check the conditions through visual inspection by walking and inspection vehicles. The current collection performance is divided into the percentage of arcing(%), the contact force, and the uplift. The percentage of arcing is composed of a vision based system and used to verify the performance of a new OCL. However, it is not always possible to measure the current collection performance during commercial operation, and maintenance based on human resources can not be replaced. This paper presents the minimum performance condition of video devices in the current collection system of commercial vehicles. In addition, a continuous arcing was measured, and current collection performance was examined on the traction power system at the 250 km/h. It was analyzed with a minimum duration of arc of 1 ms. The frame rate is then shown by comparing the number of frames in the image at the time intervals of the number of the arcing. It is expected that the result of this study can be used for examining the minimum performance of video devices depending on their purpose.

• Journal of Environmental Impact Assessment
• /
• v.8 no.4
• /
• pp.1-12
• /
• 1999

The purpose of this study is to develop a Water Quality Management System(WQMS), which calculates pollutant discharge and forecasts water quality with a water pollution model. Operational water quality management requires not only controlling pollutants but acquiring and managing exact information. A GIS software, ArcView 3.1 was used to enter or edit geographic data and attribute data, and Avenue Script was used to customize the user interface. PCI, a remote sensing software, was used to derive land cover classification from 20 m resolution SPOT data by image processing. WQMS has two subsystems, database subsystem and modelling subsystem. The database subsystem consisted of watershed data from digital maps, remote sensing data, government reports, census data and so on. The modelling subsystem consisted of NSPLM(NonStorm Pollutant Load Model) and SPLM(Storm Pollutant Load Model). It calculates the amount of pollutant and predicts water quality. These two subsystems were connected through a graphic display module. This system has been calibrated for and applied to Mokhyun Stream watershed.