• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제33회 하계학술대회 초록집
• /
• pp.77-77
• /
• 2007

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.137-141
• /
• 2006

Process window for infinite etch selectivity of silicon nitride $(Si_3N_4)$ layers to ArF photoresist (PR) was investigated in dual frequency superimposed capacitive coupled plasma (DFS-CCP) by varying the process parameters such as low frequency power $(P_{LF})$, $CH_2F_2$ and $H_2$ flow rate in $CH_2F_2/H_2/Ar$ plasma. It was found that infinite etch selectivities of $Si_3N_4$ layers to the ArF PR on both blanket and patterned wafers can be obtained for certain gas flow conditions. The etch selectivity was increased to the infinite values as the $CH_2F_2$ flow rate increases, while it was decreased from the infinite etch selectivity as the $H_2$ flow rate increased. The preferential chemical reaction of the hydrogen with the carbon in the polymer film and the nitrogen on the $Si_3N_4$ surface leading to the formation of HCN etch by-products results in a thinner steady-state polymer and, in turn, to continuous $Si_3N_4$ etching, due to enhanced $SiF_4$ formation, while the polymer was deposited on the ArF photoresist surface.

• Journal of Microbiology and Biotechnology
• /
• 제32권5호
• /
• pp.672-679
• /
• 2022

Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50℃ and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.183-187
• /
• 2000

In this study the SrBi$_2$Ta$_2$$O_{9}$ (SBT) thin films were etched by using magnetically enhanced inductively coupled Ar/CHF$_3$plasma as function of CHF$_3$/(Ar+CHF$_3$)gas mixing ratio. Maximum etch rate of SBT thin films was 1650 $\AA$/min and the selectivities of SBT to Pt and photoresist(PR) were 1.35 and 0.94 respectively under CHF$_3$/(Ar+CHF$_3$) of 0.1 For study on etching mechanism of SBT thin film X-ray photoelectron spectroscopy (XPS) surface analyses and secondary ion mass spectrometry (SIMS) mass analysis of etched SBT surfaces were performed. Among the elements of SBT thin film. M(Sr, Bi, Ta)-O bonds are broken by Ar ion bombardment and form SrF and TaF$_2$by chemical reaction with F. SrF and TaF$_2$are removed more easily by Ar ion bombardment. Scanning electron microscopy(SEM) was used for the profile examination of etched SBT film and the cross-sectional SEM profile of etched SBT film under CHF$_3$(Ar+CHF$_3$) of 0.1 was about 85$^{\circ}$X>.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.263-267
• /
• 1996

Reactive ion etching of Pt thinfilm was studied using $CCl_2F_2$, Ar, and $O_2$ . Etch rate of the Pt increased as the total pressure decreases and the RF power increased, while the flow rate of $CCl_2F_2$ had little effect on the Pt etch rate. Addition of $O_2$ had no effect on Pt etch rate up to 20% $O_2$ Selectivity between Pt and photoresist increased as the pressure decreased and the RF power increased, making it possible to pattern a thicker Pt layer with a thinner photoresist. A maximum etch rate of 300$\AA$/min was obtained at $CCl_2F_2$ flow rate of 20 sccm. RF power of 400 W, and the total pressure of 60mTorr.

• 동굴
• /
• 제82호
• /
• pp.1-4
• /
• 2007

In this paper, the etching of Au films using photoresist masks on Si substrates was investigated using a capacitively coupled plasma etch reactor. The advantages of plasma etch techniques over current methods for Au metalization include the ability to simplify the metalization process flow with respect to resist lift-off schemes, and the ability to cleanly remove etched material without sidewall redeposition, as is seen in ion milling. The etch properties were measured for different gas mixing ratios of CF4/Ar, and chamber pressures while the other conditions were fixed. According to statistical design of experiment (DOE), etching process of Au films was characterized and also 20 samples were fabricated followed by measuring etch rate, selectivity and etch profile. There is a chemical reaction between CF4 and Au. Au- F is hard to remove from the surface because of its high melting point. The etching products can be sputtered by Ar ion bombardment.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.531-536
• /
• 2005

포토리지스트 마스크로 패턴된 CoTb 및 CoZrNb 자성 박막에 대한 유도 결합 플라즈마 반응성 이온 식각이 $Cl_2/Ar$와 $C_2F_6/Ar$ 가스를 이용하여 진행되었고 식각 속도와 식각 프로파일 측면에서 조사되었다. $Cl_2$와 $C_2F_6$ 가스의 농도가 증가함에 따라서 자성 박막들의 식각 속도는 감소하였고 식각 경사는 낮아졌다. 자성 박막들의 식각 가스로서 $Cl_2/Ar$이 빠른 식각 속도와 가파른 식각 경사를 얻는데 있어서 $C_2F_6/Ar$ 보다 더 효과적이었다. Coil rf power의 증가는 플라즈마 내의 Ar 이온과 라디칼의 밀도를 증가시키고 dc bias voltage의 증가는 기판으로 스퍼터되는 Ar 이온의 에너지를 증가시키기 때문에 coil rf power와 dc bias voltage가 증가할수록 식각 속도와 식각 경사는 증가하였지만 패턴의 측면에서 재증착이 일어났다. 자성 박막들의 적층으로 형성된 magnetic tunnel junction stack에 고밀도 플라즈마 반응성 이온 식각을 적용하여, 높은 식각 경사와 재증착이 없는 깨끗한 식각 프로파일을 얻었다.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.806-811
• /
• 2004

1-Hydroxy-4-(2-naphthalenesulfonyloxy) cyclohexane(1), 1,4-di-(2-naphthalenesulfonyloxy) cyclohexane(2), 1-hydroxy-4-(2-thiophenesulfonyloxy) cyclohexane(3), 1,4-di-(2-thiophenesulfonyloxy) cyclohexane(4) were synthesized and evaluated for their performance as novel acid amplifiers for 193 nm photoresists. These acid amplifiers(1-4) showed reasonable thermal stability at the usual resist-processing temperature, 9$0^{\circ}C$-12$0^{\circ}C$. And estimated by the sensitivity curve, (1)-(4) enhanced the sensitivity of poly(tert-butyl methacrylate) film by 1.2-1.4 times, compared to poly(tert-butyl methacrylate) film whithout acid amplifiers, in the presence of a photoacid generator.