• Resources Recycling
• /
• v.22 no.6
• /
• pp.41-47
• /
• 2013

In this study, deoxidation of Ti scrap using liquid calcium was investigated. Experiments were conducted in a closed stainless steel chamber under Ar atmosphere during 30 to 90 minutes. Oxygen content of Ti scrap was reduced from 0.54 to 0.19 wt% by calciothermic reduction in 30 minutes at $1000^{\circ}C$ and 2.5 Ti/Ca mass ratio. By the calciothermic reduction of Ti scrap for 30 minutes under the reaction temperature of $1100^{\circ}C$ and 2.5 Ti/Ca mass, a minimum oxygen content of about 0.126 wt% in Ti scrap was obtained.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.205-209
• /
• 2017

Unlike spherical drop impact, ellipsoidal drop impact can control the bouncing height on a heated surface by significantly altering impact behavior. To scrutinize the effect of the aspect ratio (AR) of the drop on the bounce suppression, in this study, non-axisymmetric spreading behaviors are observed from two side views and characterized based on the spreading width of the drop for horizontal principal axes. In addition, the maximum spreading width is investigated for various ARs. The results show that as the AR increases, the maximum spreading width of the minor axis increases, whereas that of the major axis shows no significant variation. In the regime of high AR and high impact velocity, liquid fragmentations by three parts are observed during bouncing. These fragmentations are discussed in this work. The hydrodynamic features of ellipsoidal drop impact will help understand bouncing control on non-wetting surfaces for several applications, such as self-cleaning and spray cooling.

• Reproductive and Developmental Biology
• /
• v.31 no.2
• /
• pp.115-120
• /
• 2007

This study was conducted to examine the effect of several saccharides on the induction of capacitation and acrosome reaction (AR) and to examine the effects of mono and polysaccharides on the penetration activity of boar spermatozoa. Spermatozoa were inseminated in medium with fucose, galactose and mannose as monosaccharide, and fucoicIan. galactan and marman as polysaccharide. The penetration rates were significantly (p<0.05) lower in medium with galactose (40.6%), mannose (38.1%), fucose (41.6%) and fucoidan (36.6%) compared with control (56.7%). The rates of AR were increased (40.7 to 59.8%) by the preincubation periods prolonged from 0 to 4 hr (p<0.05). Similar tendencies were observed in AR when spermatozoa were treated with monosaccharides, but not significantly differ among the groups treated with different time of preincubation with some exception of galactose. When spermatozoa were treated with polysaccharides, the rates of AR were significantly (p<0.05) increased by preincubation time prolonged from 0 to 4 hr with an exception of fucoidan. In conclusion, the present study suggests that penetration rate of spermatozoa is higher in presence of polysaccharides than monosaccharides. Also, it may resume that the comparing to control, the all saccharides (L-fucose, D-galactose, D-mannose, fucoidan. galactan and mannan)-treated groups slightly increase the AR pattern as preincubation time prolonged.

• Journal of Life Science
• /
• v.12 no.2
• /
• pp.173-181
• /
• 2002

This study was conducted to do the comparative analysis of mating type locus controlling the direct formation of fruiting body in Schizophyllum commune which is indigenous to North America with that of other identified mating locus. The 3120 bp Y-region nucleotide of A $\alpha$ 3 mating locus activating a developmental pathway in S. commune was determined, and appeared to have about 96% homology to S. commune 1-71 $A\alpha$3 allele indigenous to South America, showing strongly a conservative feature. This nucleotide analysis also showed above 96% homology highly in the seven presumed exons, and about 97% in the acidic rich region (AR), about 99% in homeodomain (H7), about 97% in the basic rich region (BR), about 95% in the serine rich region (Ser) respectively. In the comparative analysis to the translated polypeptide sequence, S. commune A $\alpha$ 3 mating locus containing Y-region also showed about 97% homology to the region of S. commune indigenous to North America, but the identity ratio to Y1 including Y4, Y5, Y6 different allele types was declined to about 41~49%. In the analysis of functional loci controlling mating activity, it is assumed to have a highly conservative feature showing about 98% homology in homeodomain polypeptide. Especially, it is notable that the homology ratio of above 85% in homeodomain motif between mating type alleles was higher than in the AR, BR, Ser showing about 10~50% homology.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1699-1707
• /
• 2013

During the fermentative production of 1,3-propanediol under high substrate concentrations, accumulation of intracellular 3-hydroxypropionaldehyde will cause premature cessation of cell growth and glycerol consumption. Discovery of oxidoreductases that can convert 3-hydroxypropionaldehyde to 1,3-propanediol using NADPH as cofactor could serve as a solution to this problem. In this paper, the yqhD gene from Klebsiella pneumoniae DSM2026, which was found encoding an aldehyde reductase (KpAR), was cloned and characterized. KpAR showed broad substrate specificity under physiological direction, whereas no catalytic activity was detected in the oxidation direction, and both NADPH and NADH can be utilized as cofactors. The cofactor binding mechanism was then investigated employing homology modeling and molecular dynamics simulations. Hydrogen-bond analysis showed that the hydrogen-bond interactions between KpAR and NADPH are much stronger than that for NADH. Free-energy decomposition dedicated that residues Gly37 to Val41 contribute most to the cofactor preference through polar interactions. In conclusion, this work provides a novel aldehyde reductase that has potential applications in the development of novel genetically engineered strains in the 1,3-propanediol industry, and gives a better understanding of the mechanisms involved in cofactor binding.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.9
• /
• pp.1051-1059
• /
• 1992

In this paper, two general methods using time-series analysis in the functional separation of the myoelectric signal of human arm movements are developed. Autocorrelation, covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe six arm movement patterns` the forearm flexion and extension, the wrist pronation and supination, rotation-in and rotation-out. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squared error. With the error signals of autoregressive(AR) model, the result showed that the highest success rate was obtained in the case of 4th order, and success rate was decreased with increase of order. Autocorrelation was the method of choice for better success rate. This technique might be applied to biomedical and rehabilitation engineering.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.3
• /
• pp.199-205
• /
• 2002

In this paper, the optimum shape and arrangement of ribs in the channel of a plate heat exchanger are studied. The following dimensionless geometric parameters of ribs are selected as design variables: rib height ($H_R$), angle of attack ($\beta$), rib pitch ($P_R$), rib distance (L) and aspect ratio of rib (AR). The optimization is performed by minimizing the objective function consisting of the Nusselt number and the friction factor. The optimal values of design variables are as follows: $H_R$=0.263, $\beta$=0.290, $P_R$=3.142, L: 3.954, AR=0.342. The pressure drop and the heat transfer of the optimum model, compared to those of the reference model, are increased by 15.1% and 41.6%, respectively.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.767-770
• /
• 2012

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual-feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are $28mm{\times}28mm{\times}4mm$, which is the most compact size among the dual-band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.34-41
• /
• 1984

MOEN/MO double layer which is to be used It)r the RMOS (refractory metal oxide semiconductor) gate material has been fabricated by means of low temperature reactive sputtering in N2 and Ar mixture. Good Mo2N film was obtained in the volumetric mixture of Ar:N2=95:5. The sheet resistance of the fabricated Mo7N film was about 1.20 - 1.28 ohms/square, which is about an order of magnitude lower than that of polysilicon film, and this would enable to improve the operational speed of devices fabricated with this material. When PSG (phosphorus silicate glass) was used as impurity diffusion source for the source and drain of the RMOSFET in the N2 atmosphere at about 110$0^{\circ}C$, the Mo2N was reduced to Mo resulting in much smaller sheet resistance of about 0.38 ohm/square. The threshold voltage of the RMOSFET fabricated in our experiment was - 1.5 V, and both depletion and enhancement mode RMOSFETs could be obtained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.36-41
• /
• 2002

Abstract The stoichiometric and double-ordered perovskite $Sr_2FeMoO_6$ (SFMO) polycrystalline ceramics were fabricated by sintering at above $900^{\circ}C$ in $H_2$(5%)/Ar reductive ambient. SMO polycrystals showed good ferromagnetic properties andmagnetrotesistqnce ratios of about 15 % at 8K and 3 % at room temperature. Amorphous SFMO thin films were deposited on $LaA1O_3$ and $SrTiO_3$ single crystal substrates using rf sputtering method with the SFMO polycrystalline ceramic target. Double-ordered perovskite polycrystalline SFMO thin films were fabricated by solid state crystallization by annealing the deposited amorphous films at above $680^{\circ}C$ in $H_2$(5%)/Ar reductive ambient. SFMO thin films exhibited ferromagnetic behavior. Their magnetroresistance ratios, however, were only 0.3~0.5% at 8K and disappeared with increasing the measuring temperature. This was attributed to the absence of magnetic spin tunneling between grains due to the porous structure and non-stoichiometric composition of the deposited films.