• 천문학회보
• /
• 제35권1호
• /
• pp.41.1-41.1
• /
• 2010

IGRINS (the Immersion GRating Infrared Spectrograph) is a high resolution infrared spectrograph which is being developed by a collaboration of the University of Texas, the Korea Astronomy and Space Science Institute, and Kyung Hee University. The wavelength calibration unit of IGRINS will be situated between the telescope flange and IGRINS dewar. It will include Th-Ar hallow cathode lamp, optical elements, and gas absorption cell for the case that requires precise calibration (e.g., radial velocity observation). The system will also use a tungsten halogen lamp in an integrating sphere as a blackbody source for the flat-field imaging. IGRINS will be placed initially on the McDonald 2.7m Harlan J. Smith telescope and later on 4-8m class telescopes. We present an overview of the plan for the wavelength calibration sources and of the development process for the optical and mechanical design of the IGRINS calibration system.

• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.41-45
• /
• 2017

The effects of the heat treatment temperature and of the atmosphere on the dehydrogenation and hydrogen reduction of ball-milled $TiH_2-WO_3$ powder mixtures are investigated for the synthesis of Ti-W powders with controlled microstructure. Homogeneously mixed powders with refined $TiH_2$ particles are successfully prepared by ball milling for 24h. X-ray diffraction (XRD) analyses show that the powder mixture heat-treated in Ar atmosphere is composed of Ti, $Ti_2O$, and W phases, regardless of the heat treatment temperature. However, XRD results for the powder mixture, heat-treated at $600^{\circ}C$ in a hydrogen atmosphere, show $TiH_2$ and TiH peaks as well as reaction phase peaks of Ti oxides and W, while the powder mixture heat-treated at $900^{\circ}C$ exhibits only XRD peaks attributed to Ti oxides and W. The formation behavior of the reaction phases that are dependent on the heat treatment temperature and on the atmosphere is explained by thermodynamic considerations for the dehydrogenation reaction of $TiH_2$, the hydrogen reduction of $WO_3$ and the partial oxidation of dehydrogenated Ti.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.36-40
• /
• 2004

RF 마그네트론 스퍼터링법을 이용하여 $SnO_2$ 박막을 증착하여 열처리 분위기에 따른 미세구조 및 표면상태 변화를 살펴보고 그에 따른 전기적 특성의 변화를 고찰하였다. 후속 열처리는 $500^{\circ}C$에서 공기와 질소 분위기하에서 수행되었으며, 미세구조 및 표면상태를 살펴보기 위하여 SEM, AFM과 XPS 측정을 실시하였다. 공기중에서 열처리된 경우에는 증착 초기상태와 유의차가 크지 않은 반면 질소 분위기에서 열처리한 후에는 미세구조와 표면의 화학적 상태의 변화가 크게 발생하였다. 이러한 결과는 상대적으로 낮은 산소 분압하에서 열처리 과정에서 흡착 산소의 탈착 및 격자산호의 유출에 기인하는 것으로 판단된다. 또한, 질소 분위기하에서의 열처리 후에 비저항이 열처리 전에 비하여 5배 이상 증가하였다. 이로부터 전하 전송자인 전자 농도의 증가에 비하여 미세구조의 변화에 따른 불연속적인 전도경로가 더 크게 영향을 미치는 것을 알 수 있다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.41-41
• /
• 2003

텅스텐(W)은 높은 thermal stability 와 process compatibility 및 우수한 corrosion r resistance 둥으로 integrated circuit (IC)의 gate 및 interconnection 둥으로의 활용이 대두되고 있으며, 차세대 thin film transistor liquid crystal display (TFT-LCD)의 gate 및 interconnection m materials 둥으로 사용되고 았다. 그러나, 이러한 장점을 가지고 있는 팅스텐 박막이 실제 공정상에 적용되가 위해서는 건식 식각이 주로 사용되는데, 이는 wet chemical 을 이용한 습식 식각을 사용할 경우 낮은 etch rate, line width 의 감소 및 postetch residue 잔류 동의 문제가 발생하기 때문이다. 또한 W interconnection etching 을 하기 위해서는 높은 텅스텐 박막의 etch rate 과 하부 layer ( (amorphous silicon 또는 poly-SD와의 높은 etch selectivity 가 필수적 이 라 할 수 있다. 그러 나, 지금까지 연구되어온 결과에 따르면 텅스탠과 하부 layer 와의 etch selectivity 는 2 이하로 매우 낮게 관찰되고 았으며, 텅스텐의 etch rate 또한 150nm/min 이하로 낮은 값을 나타내고 있다. 따라서 본 연구에서는 halogen-based inductively coupled plasma 를 이용하여 텅스텐 박막 식각시 여러 가지 첨가 가스에 따른 높은 텅스탠 박막의 etch rate 과 하부 layer 와의 높은 etch s selectivity 를 얻고자 하였으며, 그에 따른 식각 메커니즘에 대하여 알아보고자 하였다. $CF_4/Cl_2$ gas chemistry 에 첨 가 가스로 $N_2$와 Ar을 첨 가할 경 우 텅 스텐 박막과 하부 layer 간의 etch selectivity 증가는 관찰되지 않았으며, 반면에 첨가 가스로 $O_2$를 사용할 경우, $O_2$의 첨가량이 증가함에 따라 etch s selectivity 는 계속적으로 증가렴을 관찰할 수 있었다. 이는 $O_2$ 첨가에 따라 형성되는 WOF4 에 의한 텅스텐의 etch rates 의 감소에 비하여, $Si0_2$ 등의 형성에 의한 poly-Si etch rates 이 더욱 크게 감소하였기 때문으로 사료된다. W 과 poly-Si 의 식각 특성을 이해하기 위하여 X -ray photoelectron spectroscopy (XPS)를 사용하였으며, 식각 전후의 etch depth 를 측정하기 위하여 stylus p pmfilometeT 를 이용하였다.

• 한국안전학회지
• /
• 제39권1호
• /
• pp.41-54
• /
• 2024

Efforts to reduce on-site safety incidents have expanded, leading to active research in this domain. However, a systematic analysis to improve the utility of technology is lacking. In this study, we conducted a survey on the various institutional and technical improvement measures to promote the application of smart construction safety technology over three years after the implementation of the "Smart Safety Equipment Support Project." The results showed that financial constraint was the primary obstacle in the adoption of this innovation. Fostering a flexible environment in the utilization of management fees and financial support of projects was determined to aid in the extensive application of the technology. Ensuring cost efficiency and user-friendliness were principally necessary for technical enhancements in the smart construction safety technology. Technologies, such as VR/AR safety education, real-time location tracking, wearable devices, and innovation on streamlining safety-related work efficiency, had been anticipated to contribute to on-site safety. Operating a smart safety control center was expected to be beneficial in the systematic securing of data and reduction of safety blind spots. Effective methods had been suggested to overcome the barriers that hindered the development and application of smart construction safety technology. This study facilitates in the technological improvements in this field.

• 센서학회지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2003

CsI에 활성제로 Li, K, Rb를 첨가하여 CsI(Li), CsI(K) 및 CsI(Rb) 단결정을 Czochralski방법으로 육성하였다. $^{137}CS$(0.662 MeV)에 대한 CsI(Li:0.2 mole%) 섬광체의 에너지 분해능은 14.5%이었고 CsI(K:0.5 mole%) 섬광체는 15.9%이었으며 CsI(Rb:1.5 mole%) 섬광체는 17.0%이였다. 이들 CsI(Li), CsI(K) 및 CsI(Rb) 섬광체의 $\gamma$선 에너지에 대한 에너지 교정곡선은 선형적 이였다. 일정비율 시간분석법(CFT :constant-fraction timing method)으로 측정한 CsI(Li:0.2 mole%), CsI(K:0.5 mole%) 및 CsI(Rb:1.5 mole%) 성광체의 시간 분해능은 각각 9.0 ns, 14.7 ns 및 9.7 ns이였다. CsI(Li:0.2 mole%), CsI(K:0.5 mole%) 및 CsI(Rb:1.5 mole%) 섬광체의 형광감쇠시간은 각각 ${\tau}_1=41.2\;ns$, ${\tau}_2=483\;ns$, ${\tau}_1=47.2\;ns$, ${\tau}_2=417\;ns$ 및 ${\tau}_1=41.3\;ns$ 및 ${\tau}_2=553\;ns$이였다. 그리고 CsI(Li:0.2 mole%), CsI(K:0.5 mole%) 및 CsI(Rb:1.5 mole%) 단결정의 인광감쇠시간은 각각 0.51 s, 0.57 s 및 0.56 s이였다.

• 복식문화연구
• /
• 제4권3호
• /
• pp.373-381
• /
• 1996

Draping design system organized by European about 13C has been developed greatly for a long while, but for the purpose of the practical use the Dress form similar to human body has been needed. In order to make three-dimensional effect as fitting Muslin ot the Dress form. the Basic lien has to be established in Muslin and Dress form each. At this time, Shoulder-blade level is indicated from various angles : measure down 10cm from the back neck point, a quarter of the back neck point to the waist lie, the half-way point between neckline and bust line, measure down 41 inches from the back neck line, measure down 3 inches from the top edge of the muslin at center back and cross mark for neck line, and so forth. This study established the Basic line through the two ways of them (B.N.P∼B.L/2, B.N.P∼W.L/4), did tight fitting to the 5 kinds of Dress forms which ar normal type in the drop value(the difference between hip circumference and bust circumference), and acquired Basic Pattern. After the experiment, fitness are throughly investigate by statistical analysis of measurements. As a result, this study finds out that fit is proper when shoulder blade level is situated on a fourth of the back neck point to the waist line and a quarter point between back neck point and waist line, and waist dart is situated on the back center line and princess line.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.36-41
• /
• 2009

Superconducting quantum phenomena are getting attention from the field of metrology area. Following its first successful application of Josephson effect to voltage standard, piconewton force standard was suggested as a candidate for the next application of superconducting quantum effects in metrology. It is predicted that a micron-sized superconducting Nb ring in a strong magnetic field gradient generates a quantized force of the order of sub-piconewtons. In this work, we studied the design and fabrication of Nb superconducting quantum interference device (SQUID) on an ultra-thin silicon cantilever. The Nb SQUID and electrodes were structured on a silicon-on-insulator (SOI) wafer by dc magnetron sputtering and lift-off lithography. Using the resulting SOI wafer, we fabricated V-shaped and parallel-beam cantilevers, each with a $30-{\mu}m$-wide paddle; the length, width, and thickness of each cantilever arm were typically $440{\mu}m,\;4.5{\mu}m$, and $0.34{\mu}m$, respectively. However, the cantilevers underwent bending, a technical difficulty commonly encountered during the fabrication of electrical circuits on ultra-soft mechanical substrates. In order to circumvent this difficulty, we controlled the Ar pressure during Nb sputtering to minimize the intrinsic stress in the Nb film and studied the effect of residual stress on the resultant device.

• The International Journal of Costume Culture
• /
• 제3권1호
• /
• pp.41-52
• /
• 2000

The Purposes of this study ar (1) to identify types and levels of channel conflicts between an apparel manufacturer and a franchised agency, (2) to investigate the effect of economic dependence on conflicts, and (3) to examine the effect of conflicts on satisfaction in a franchised agency's perspective in distributive channel of Korean apparel industry. For this study, questionnaires were administered to the owner or manager of 300 franchised agencies. Employing a sample of 209, data were analyzed by using means, factor analysis, pearson correlation and multi-regression analysis. Major findings are as follows: 1) Types of conflicts between apparel manufacturers and franchised agencies are identified as goal divergence, difference in perception, ineffective communication and lack of role clarity. The highest level of conflicts are lack of role clarity, followed by goal divergence, difference in perception and ineffective communication. 2) Economic dependence leads to channel conflicts in part. Greater levels of economic dependence foster greater conflicts such as lack of role clarity and lower conflicts such as ineffective communication. 3) With respect to effect of conflict on satisfaction, the greater the levels of conflict, the lower the degree of satisfaction with ole performance and with business decision and overall satisfaction.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.31-41
• /
• 1998

Single fiber fragmentation technique was used to evaluate the change of interfacial properties by degradation of fiber tensile strength in the fiber reinforced composites. The influences of fiber tensile strength on the interfacial properties have been evaluated by the fragmentation specimens(weak fiber samples) of glass fiber/epoxy resin that was made using the pre-degraded glass fiber in distilled water at $80^{circ}C$ for specified periods. The effects of the immersion time on the interfacial properties in the distilled water at $80^{circ}C$ also have been evaluated by the fragmentation specimens(original fiber samples) of glass fiber/epoxy resin that was made using the received glass fiber. As the result, the tensile strength of glass fiber was decreased with the increasing of the treatment time in the distilled water at $80^{circ}C$ and the interfacial shear strength was independent of the change of the glass fiber strength in the single fiber fragmentation test. But in the durability test using the single fiber fragmentation specimen, interfacial shear strength decreased with the increasing of the immersion time in distilled water ar $80^{circ}C$. And it turned out that the evaluating of interfacial shear strength using original fiber tensile strength was valuable in the durability test for the water environment by the single fiber fragmentation technique.