• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제12회 학술발표회 논문개요집
• /
• pp.170-170
• /
• 1997

• 한국진공학회지
• /
• 제19권3호
• /
• pp.177-183
• /
• 2010

우리는 MOCVD (metal organic chemical vapor deposition)법을 이용하여 DEZ (Diethylzinc)을 운송하는 Ar 유속과 reactant (반응물질)의 종류에 따른 ZnO 박막 증착을 연구하였다. Bubbler 시스템을 통하여 주입되는 Ar 유속에 의해 Zn 소스인 DEZ의 양이 조절된다. 산소 기체와 수증기는 산화를 위해 반응물질로 사용된다. 본 연구로부터 표면의 거칠기(surface roughness)는 반응물질의 종류와 DEZ Ar 유속에 관계되며 박막의 두께에 의존한다는 것을 알 수 있었다. 그러나 기판 온도는 산소를 반응물로 하는 상태에서는 표면 거칠기에 영향을 주지 못함을 알 수 있었다. 우리는 ZnO 박막이 90 sccm (Standard Cubic Centimeter per Minute)의 DEZ Ar 유속, 8 Pa의 수증기압, 그리고 $140^{\circ}C$의 기판 온도에서 39.16 mm의 가장 높은 거칠기를 가진다는 것을 확인할 수 있었다. 본 논문은 태양전지의 광 흡수층으로 사용가능한 ZnO 박막을 연구하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.494-494
• /
• 2013

Atmospheric pressure non-thermal plasma of the needle-typed interaction with aqueous solutions has received increasing attention for their biomedical applications [1]. In this context, surface discharges at bio-solutions were investigated experimentally. We have generated the non-thermal plasma jet bombarding the bio-solution surface by using an Ar gas flow and investigated the emission lines by OES (optical emission spectroscopy) [2]. Moreover, The non-thermal plasma interaction with bio-solutions has received increasing attention for their biomedical applications. So we researched, the OH radical density of various biological solutions in the surface by non-thermal plasma were investigated by Ar gases. The OH radical density of DI water; deionized water, DMEM Dulbecco's modified eagle medium, and PBS; 1x phosphate buffered saline by non-thermal plasma jet. It is noted that the OH radical density of DI water and DMEM are measured to be about $4.33{\times}1016cm-3$ and $2.18{\times}1016cm-3$, respectively, under Ar gas flow 250 sccm (standard cubic centimeter per minute) in this experiment. The OH radical density of buffer solution such as PBS has also been investigated and measured to be value of about $2.18{\times}1016cm-3$ by the ultraviolet optical absorption spectroscopy.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.376-381
• /
• 2009

Indium Tin Oxide (ITO) thin films on Polyethylene Terephtalate (PET) substrate were prepared by Roll-to-Roll sputter system with targets of 5 wt% and 10 wt% $SnO_2$ at room temperature. The influence of the chromaticity (b*) and transmittance properties of the ITO Films were investigated. The ITO thin films were deposited as a function of the DC power, rolling speed, and Ar/$O_2$ gas flow ratio, and then characterized by spectrophotometer. Their crystallinity and surface resistance were also analyzed by X-ray diffractometer and 4-point probe. As a result, the chromaticity (b*) and transmittance of the ITO films were broadly dependent on the thickness, which was controlled by the rolling speed. When the ITO films were prepared with the DC power of 300 W and the Ar/$O_2$ gas flow ratio of 30/1 sccm using 10 wt% $SnO_2$ target as a function of the rolling speeds 0.01 through 0.10 m/min, its chromaticity (b*) and transmittance were about -4.01 to 11.28 and 75.76 to 86.60%, respectively. In addition, when the ITO films were deposited with the DC power of 400W and the Ar/$O_2$ gas flow ratio of 30/2 sccm used in 5 wt% $SnO_2$ target, its chromaticity (b*) and transmittance were about -2.98 to 14.22 and 74.29 to 88.52%, respectively.

• 산업융합연구
• /
• 제21권7호
• /
• pp.83-92
• /
• 2023

유전체 전위장벽방전방식에 의한 플라즈마 젯의 블렛 형상은 인가되는 유량과 전기장의 크기에 따라 달라지고 이러한 변화는 DBD 플라즈마 젯의 밀도차이에 의한 스펙트럼 분포의 차이로 나타난다. 발생된 플라즈마 젯의 스펙트럼의 분석을 통한 활성종의 발생과 강도의 차이는 장치를 활용하는데 있어서 중요한 요소이다. 본 논문에서는 Ar가스를 이용한 대기압 볼륨 DBD방식의 플라즈마 젯 발생장치를 제안된 설계방법에 따라 구성하였다. 플라즈마 젯의 발생을 위한 유량의 의존도를 규명하기 위한 Ar가스의 유동해석을 시뮬레이션을 통해 확인하였고 프로토타입 시스템에서는 MFC를 통한 유량제어를 통해 최적의 플라즈마 젯 불렛형상을 발생시키고 발생된 플라즈마 젯의 특성을 분석하기 위해 스펙트로미터를 이용한 플라즈마 젯의 특성을 분석하였다. 제안된 시스템의 설계방법을 통한 장치에서 최적의 플라즈마 젯 형상 확립방법과 EOS 상에서 활성종에 대한 결과를 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제8권1호
• /
• pp.33-38
• /
• 2009

We have investigated the effect of the ambient gases on the characteristics of AZO thin films for the OLED (organic light emitting diodes) devices. These AZO thin films are deposited by rf-magnetron sputtering under different ambient gases (Ar, Ar+$O_2$, and Ar+$H_2$) at 300. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.2sccm to 1sccm and from 0.5sccm to 5sccm, respectively. The AZO thin films were preferred oriented to (002) direction regardless of ambient gases. The electrical resistivity of AZO film increased with increasing flow rate of $O_2$ under Ar+$O_2$ while under Ar+$H_2$ atmosphere the electrical resistivity showed minimum value near 1sccm of $H_2$. All the films showed the average transmittance over 80% in the visible range. The OLED device was fabricated with different AZO substrates made by configuration of AZO/$\acute{a}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of AZO substrate.

• 한국표면공학회지
• /
• 제46권3호
• /
• pp.133-138
• /
• 2013

We have developed a 2D axi-symmetric numerical model for an inductively coupled plasma system in order to analyze gas mixing effect through a narrow gap shower head. For frictional flow, holes of 0.5 mm diameter and 2 mm length are approximately modeled in 2D. Gas velocity distribution 10 mm below the shower head showed 2 times difference between the center and the edge at 10 mTorr. At 10 mm above the wafer, it was increased to 6 times difference due to the pumping duct effect. The model with a 5 mm height buffer region of a shower head showed reasonable behavior of Ar discharge. The density of Ar metastable showed additional peak inside the buffer region around the edge holes.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.183-187
• /
• 2007

The magnetron reactive ion etching (RIE) characteristics of polycrystalline (poly) 3C-SiC grown on $SiO_2$/Si substrate by APCVD were investigated. Poly 3C-SiC was etched by $CHF_3$ gas, which can form a polymer as a function of side wall protective layers, with additive $O_2$ and Ar gases. Especially, it was performed in magnetron RIE, which can etch SiC at lower ion energy than a commercial RIE system. Stable etching was achieved at 70 W and the poly 3C-SiC was undamaged. The etch rate could be controlled from $20\;{\AA}/min$ to $400\;{\AA}/min$ by the manipulation of gas flow rates, chamber pressure, RF power, and electrode gap. The best vertical structure was improved by the addition of 40 % $O_2$ and 16 % Ar with the $CHF_3$ reactive gas. Therefore, poly 3C-SiC etched by magnetron RIE can expect to be applied to M/NEMS applications.

• 한국항공우주학회지
• /
• 제33권12호
• /
• pp.68-75
• /
• 2005

주유동 기체의 물리적 특성이 초음속 이젝터 성능에 미치는 영향에 관한 연구를 수행하였다. 기체의 분자량과 정압 비열 변화에 따른 성능 변화에 관한 연구는 축대칭 환형 분사 초음속 이젝터를 사용하였다. 주유동 기체로는 공기, $CO_{2}$, Ar, $C_{3}H_{8}$, $CCl_{2}F_{2}$를 사용하였다. 주유동 기체의 분자량과 정압 비열이 증가함에 따라 일정 주유동 압력에 대한 부유동 압력은 증가하였고 이러한 경향은 몰비열이나 비열비의 형태로 통합되어 확인되었다.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.669-673
• /
• 2011

This study explores the numerical analysis method of fluid dynamics in the reaction section to improve the gas processing efficiency in the hazardous gas removal by atmospheric thermal plasma. This study also intends to contribute in technology advance to improve the processing efficiency and make the process more stable. Numerical analysis of temperature distribution in the reaction section dependent on the change in flow velocity of Ar and plasma temperature change, which are major control variables in the cracking process of HFC-23 using arc plasma, was done. The characteristic of incoming oxygen by temperature suggested that when temperature increased to 1600K, 1700K, 1800K respectively, the range of cracking temperature 1500K increased to 75.0%, 83.3%, 90.2% respectively. The temperature change of Ar by velocity change was widest in the area higher than 1500K when the velocity was 2.5m/s; however, since there was no big difference when the velocity was 2m/s, it is believed that 2 m/s would be most proper.