• 한국재료학회지
• /
• 제3권6호
• /
• pp.565-574
• /
• 1993

Ar/Ar-$H_{2}$ 플라즈마법으로 고순도 Nb금속을 환원 정련하였다. 또한, Ar-(20%)$H_{2}$플라즈마에서의 용융Nb금속과 수소간의 반응을 해석하였다. Ar플라즈마 환원에서는 $C/Nb_{2}O_{5}$=5.00의 비에서 99.5wt%의 금속 Nb을 얻었으며, 니오븀 산화물의 열분해에 의한 O/Sub 2/의 손실은 발생하지 않았다. Ar-(20%)$H_{2}$ 플라즈마에서는 $C/Nb_{2}O_{5}$=4.80의 비에서 99.8wt%의 금속 Nb을 제조하였다. 주된 탈산반응은 H, $H_{2}$와의 반응이었으며,$NbO_{x}$의 증발에 의한 탈산은 발생하지 않았으나, "splash"효과에 의해 Nb의 질량손실이 발생함을 관찰하였다. 탈산반응은 1차 반응속도론에 따랐으며, 탈산의 반응속도 상수(k')는 $7.8 \times 10_{-7}$(m/sec)였다. Ar-(20%)$H_{2}$ 플라즈마법에서 Nb금속 내의 수소 용해도는 60ppm으로 분자상태 수소의 용해도인 40ppm 보다 높았으며, 포화되는 시간은 60초 이내였다. 이를 다시 Ar 플라즈마로 처리함으로써 수소 함량을 10ppm 이하로 감소시킬 수 있었다.소시킬 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.294-300
• /
• 2017

$TeO_x$ thin films were deposited at various $O_2$/Ar gas-flow ratios by a reactive RFmagneton sputtering technique from $TeO_2$ and Te targets. X-ray diffraction (XRD) results revealed that the $TeO_x$ thin films were amorphous. The structure and chemical composition of the $TeO_x$ thin films were investigated by fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The optical characteristics of the $TeO_x$ thin films were investigated by an Ellipsometer and a UV-VIS-NIR spectrophotometer. According to the $O_2$/Ar gas-flow ratios, the atomic composition ratio of $TeO_x$ thin films was divided into two regions(x=1-2, 2-3). Different optical characteristics were shown in each region. With an increasing $O_2$/Ar gas-flow ratio, the refractive index of the $TeO_x$ thin films decreased and the optical bandgap of the films increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.131-135
• /
• 2003

Zinc Oxide(ZnO) thin films on Si (100) substrate were deposited by RF magnetron sputter with changing sputtering conditions such as argon/oxygen gas ratios, RF power, and substrate temperature, chamber pressure and target-substrate distance. To analyze a crystallographic properties of the films, $\theta/2\theta$ mode X-ray diffraction, SEM, and AFM analyses. C-axis preferred orientation, resistivity, and surface roughness highly depended on $Ar/O_2$ gas ratios. The resistivity of ZnO thin films rapidly increased with increasing oxygen ratio and the resistivity value of $9{\times}10^7{\Omega}cm$ was obtained at a working pressure of 10 mTorr with $Ar/O_2$=50/50. The surface roughness was also improved with increasing oxygen ratio and the ZnO films deposited with $Ar/O_2$=50/50 showed the excellent roughness value of $28.7{\AA}$.

• ETRI Journal
• /
• 제30권3호
• /
• pp.383-393
• /
• 2008

The etching mechanism of $ZrO_2$ thin films and etch selectivity over some materials in both $BCl_3$/Ar and $BCl_3/CHF_3$/Ar plasmas are investigated using a combination of experimental and modeling methods. To obtain the data on plasma composition and fluxes of active species, global (0-dimensional) plasma models are developed with Langmuir probe diagnostics data. In $BCl_3$/Ar plasma, changes in gas mixing ratio result in non-linear changes of both densities and fluxes for Cl, $BCl_2$, and ${BCl_2}^+$. In this work, it is shown that the non-monotonic behavior of the $ZrO_2$ etch rate as a function of the $BCl_3$/Ar mixing ratio could be related to the ion-assisted etch mechanism and the ion-flux-limited etch regime. The addition of up to 33% $CHF_3$ to the $BCl_3$-rich $BCl_3$Ar plasma does not influence the $ZrO_2$ etch rate, but it non-monotonically changes the etch rates of both Si and $SiO_2$. The last effect can probably be associated with the corresponding behavior of the F atom density.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.1015-1018
• /
• 2001

Vanadium oxide thin films with thickness of about 2000 $\AA$ have been prepared by radio frequency sputter deposition using a V2O5 target in a mixed argon and oxygen atmosphere with different Ar/O2 ratio ranging from 99/1 to 90/10. X-ray diffraction and X-ray absorption near edge structure spectroscopic studies show that the oxygen content higher than 5% crystallizes a stoichiometric V2O5 phase, while oxygen deficient phase is formed in the lower oxygen content. The oxygen content in the mixed Ar + O2 has a significant influence on electrochemical lithium insertion/deinsertion property. The discharge-charge capacity of vanadium oxide film increases with increasing the reactive oxygen content. The V2O5 film deposited at the Ar/O2 ratio of 90/10 exhibits high discharge capacity of 100 ${\mu}Ah/cm2-{\mu}m$ along with good cycle performance.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.8-14
• /
• 1997

RuO$_{2}$ thin films are prepared by RF magnetron reactive sputtering and their characteristics of crystallization, microstructue, surface roughness and resistivity are studied with various O$_{2}$/(Ar+O$_{2}$) ratios and substrate temperatures. As O$_{2}$/(Ar+O$_{2}$) ratio decreas and substrate temperature increases, the preferred growing plane of RuO$_{2}$ thin films are changed from (110) to (101) plane. With increase of the O$_{2}$/(Ar+O$_{2}$) ratio from 20% to 50%, the surface roughness and the resistivity of RuO$_{2}$ thin films increase form 2.38nm to 7.81 nm, and from 103.6.mu..ohm.-cm to 227.mu..ohm.-cm, resepctively, but the deposition rate decreases from 47 nm/min to 17nm/min. On the other hand, as the substrate temperature increases form room temperature to 500.deg. C, resistivity decreases from 210.5.mu..ohm.-cm to 93.7.mu..ohm.-cm. RuO$_{2}$ thin film deposited at 300.deg. C shows a execellent surface roughness of 2.38nm. As the annealing temperature increases in the range between 400.deg. C and 650.deg. C, the resistivity decreases because of th improvement of crystallinity. We find that RuO$_{2}$ thin film deposited at 20% of O$_{2}$/(Ar+O$_{2}$) ratio and 300.deg. C of substrate temperature shows execellent combination of surface smoothness and low resistrivity so that it is well qualified for bottom electrodes for ferroelectric thin films.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.494-498
• /
• 2000

RuO$_2$ thin films are prepared by RF magnetron reactive sputtering and their characteristics of crystallization, microstructure, surface roughness and resistivity are studied with various $O_2$/ (Ar+O$_2$) ratios and substrate temperatures. As $O_2$/(Ar+O$_2$) ratio decreases and substrate temperature increases, the preferred growing plane of RuO$_2$ thin films are changed from (110) to (101) plane. With increase of the $O_2$/(Ar+O$_2$) ratio from 20% to 50%, the surface roughness and the resistivity of RuO$_2$ thin films increase from 2.38nm to 7.81 nm, and from 103.6 $\mu$$\Omega$-cm to 227 $\mu$$\Omega$-cm, respectively, but the deposition rate decreases from 47 nm/min to 17 nm/min. On the other hand, as the substrate temperature increases from room temperature to 500 $^{\circ}C$, resistivity decreases from 210.5 $\mu$$\Omega$-cm to 93.7 $\mu$$\Omega$-cm. RuO$_2$ thin film deposited at 300 $^{\circ}C$ shows a excellent surface roughness of 2.38 nm. As the annealing temperature increases in the range between 400 $^{\circ}C$ and 650 $^{\circ}C$, the resistivity decreases because of the improvement of crystallinity. We find that RuO$_2$ thin film deposited at 20% of $O_2$/(Ar+O$_2$) ratio and 300 t of substrate temperature shows excellent combination of surface smoothness and low resistivity so that it is well Qualified for bottom electrodes for ferroelectric thin films.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.932-938
• /
• 2007

The structural, optical, and electrical properties of ZnO thin films grown on glass by radio-frequency (rf) magnetron sputtering were investigated. The mixture flow ratio of $O_2$ to Ar, which was operated with sputtering gas, was chosen as a parameter for growing high-qualify ZnO thin films. The structural properties and surface morphologies of the thin films were characterized by the X-ray diffraction and the atomic force microscope, respectively. As for the optical properties of the films, the optical absorbance was measured in the wavelength range of 300-1100 nm by using UV-VIS spectrophotometer. The optical transmittance, absorption coefficient, and optical bandgap energy of ZnO thin films were calculated from the measured data. The crystallinity of the films was improved and the bandgap energy was increased from 3.08 eV to 3.23 eV as the oxygen flow ratio was increased from 0 % to 50 %. Furthermore, The ultraviolet and violet luminescences were observed by using photoluminescence spectroscopy. The hall mobility was decreased with the increase of oxygen flow ratio.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.211-212
• /
• 2012

ZnO submicron particles were grown on Au-catalyzed Si substrate by a vapor phase transport (VPT) growth process under different mixture gas ratio at growth temperature of $900^{\circ}C$. The structural and optical properties of the ZnO submicron particles were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and photoluminescence (PL). The ZnO submicron particles could be clustered with the $O_2/Ar$ mixture gas ratio(%) higher than 10%, and it was mainly determined by the gas ambient. Particularly, when the $O_2/Ar$ mixture gas ratio was 30%, it was observed the ZnO submicron particles with diameters in the range of 125 to 500 nm and the narrowest full width at half maximum (FWHM) of XRD and PL spectra with $0.121^{\circ}$ and 92 meV, respectively. It was found that the structural and optical properties of the ZnO submicron particles were improved with increasing the $O_2/Ar$ mixture gas ratio through the XRD and PL spectra.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.12-15
• /
• 2008

Hafnium oxynitride films have been deposited onto a silicon substrate by means of radio frequency (RF) reactive sputtering using a hafnium dioxide $(HfO_2)$ target with a variety of nitrogen! argon $(N_2/Ar)$ gas flow ratios. Auger electron spectroscopy (AES)results confirm that $N_2$ was successfully incorporated into the HfON films. An increase in the $N_2/Ar$ gas flow ratio resulted in metal oxynitride formation. The films prepared with a $N_2/Ar$ flow ratio of 20/20 sccm show (222), (530), and (611) directions of $HfO_2N_2$, and the (-111), (311) directions of $HfO_2$. From X-ray reflectometry measurements, it can be concluded that with $N_2$ incorporated into the HfON films, the film density increases. The density increases from 9.8 to $10.1g/cm^3$. XRR also reveals that the surface roughness is related to the $N_2/Ar$ flow ratio.