• 한국분무공학회지
• /
• 제20권1호
• /
• pp.20-27
• /
• 2015

Urea-SCR which is one of the aftertreatment technologies for reducing the NOx emission is widely used. An experimental study was performed to investigate urea decomposition under various thermo-fluid conditions, with different temperatures and velocities of inflow gas, and urea solution quantities. 40 wt. % aqueous urea solutions were used in this study. The inflow gas conditions were similar to the exhaust conditions of a large marine engine. The spray performance of urea solution injector was identical under all experimental conditions. The conversion efficiency of $NH_3$ was larger than that of HNCO under all experimental conditions, unlike for the theoretical thermolysis reaction.

• 대한기계학회논문집B
• /
• 제39권2호
• /
• pp.177-182
• /
• 2015

디젤 엔진과 산업용 보일러에서의 질소산화물(NOX) 배출은 환경오염을 유발시키는 주요물질 중의 하나이다. 이러한 질소산화물 발생을 저감시키기 위한 방법으로 후처리 기술 중의 하나인 우레아 선택적 촉매 환원(Urea-SCR)기술이 널리 사용되고 있다. 본 연구에서는 선박용 디젤엔진의 배기가스 조건을 모사한 실험실 스케일의 실험장치를 통해 우레아 수용액의 열분해 특성에 대해 고찰하였다. 40 wt. %의 우레아 농도를 가진 우레아 수용액을 사용하였고, 모사가스의 온도와 유속변화, 우레아 수용액의 유량에 따른 총 전환율 뿐만 아니라 암모니아($NH_3$)와 이소시안산(HNCO)의 전환율 차이를 알아보았다. $210^{\circ}C$와 $250^{\circ}C$ 모사가스 온도에서 체류시간에 따라 암모니아의 전환율이 이소시안산의 전환율보다 높게 나타남을 확인하였다.

• 대한화학회지
• /
• 제24권3호
• /
• pp.209-217
• /
• 1980

요소 1,3-디메틸요소(DMU), 아세트아미드, 프로피온아미드의 상대점도와 삼투계수를 dimethylsulfoxide(DMSO), 메탄올, 에탄올 및 물용액에서 $25^{\circ}$C와 $45^{\circ}$C에서 각각 측정하였다. 수용액에서 각 용질의 점도증가량은 분몰랄부피가 증가하면서 증가하였으나 물아니 용액에서는 오히려 감소하였다. 또한 요소의 점도 증가량은 수용액에서는 DMU보다 작았으나, 물아닌 용액에서는 DMU보다 컸다. 그러나 아미드류는 어느 용매에서나 거의 같은 점도증가량을 나타내었다. 요소수용액에서 삼투계수는 DMU 수용액보다 컸으며, 물아닌 용액에서 요소용액은 DMU보다 Raoult의 법칙에서 크게 벗어났다. 이러한 사실로부터 요소는 DMSO 용액에서 자체회합을 크게 일으키고 있으며 알코올용액에서는 DMU보다는 큰 정도의 용매-용질상호작용, 수용액에서는 용매구조를 파괴하고 있음을 알았다. 아세트아미드나 프로피온아미드는 수용액이나 DMSO 용액에서보다 알코올용액에서 더 크게 용매구조를 파괴하고 있음을 알았다.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.42-47
• /
• 2011

The purpose of this study is to investigate the best melting condition with various winding number of a heating pipe, supplying quantity of engine coolant and coolant temperature at the inlet of the heating pipe. Also, it is to suggest getting method of an appropriate quantity of the agent for the urea-SCR system within 10 minutes. For this matter, this study identifies the temperature distribution of inside of urea-tank while it is frozen at the low temperature condition, and suggests the best melting condition of the frozen urea within 10 minutes. From the results, it was found that 2L of melted urea was obtained by the coolant flow rate of 200L/hr at $70^{\circ}C$ for 10 minutes from the start of engine operating.

• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.49-57
• /
• 1999

The effect of padding solution for the microwave heat dyeing of polyester fabric was studied variously. The dyeing property of polyester fabric varied with the kinds of added chemicals in the padding solution. Polyester fabrics impregnated in aqueous urea solution and aqueous sodium chloride solution for 10 minutes and then dyed for 7 minutes by microwave apparatus(2450 MHz, 700 W) under optimum conditions give good exhaustion. An aqueous solution of urea and a sodium chloride solution was more effective than water as padding solution for microwave heating dyeing. The K/S values of dyed polyester fabric by microwave were significantly affected by the type of solvent added in padding media and its concentration. Added solvents, n-hexane, acetone and dimethyl formamide were also more effective than water as padding media for the microwave heating dyeing. It is assumed that the effect of used solvents on dyeing property of polyester fabrics depends on the solubility parameter difference between solvent and polyester fabric.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.204-209
• /
• 2003

The effect of padding solution on the microwave heat dyeing of polyester fabric was studied extensively. Polyester fabrics were impregnated in aqueous urea solution and aqueous sodium chloride solution for 10 min and then dyed for 7 min by microwave apparatus (2450 MHz, 700 W) under optimum conditions which provide good exhaustion. Aqueous solutions of urea and sodium chloride showed more effective than water as a padding solution for microwave heat dyeing. The type of solvent added in padding media and its concentration significantly affects the K/S values of dyed polyester fabric. Added solvents such as n-hexane, acetone, and dimethyl formamide were also more effective than 100 % water as padding media for the microwave heat dyeing. It is supposed that the effect of used solvents on dyeing property of polyester fabrics depends on the solubility parameter difference between solvent and polyester fabric.

• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1243-1244
• /
• 2003

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.162-167
• /
• 2015

Recently, there has been rising interest in applying urea-SCR systems to large marine diesel engines because the International Maritime Organization (IMO) has decided to enforce NOx reduction regulations. Generally, in the case of urea-SCR of the marine diesel engine, a type of twin fluid atomizer has been using for injection of the urea solution. This study conducted to investigate an effect of the atomization of external-mixing twin fluid nozzle on the conversion efficiency of reductant. The lab-scaled experiment device was installed to mimic the urea-SCR system of the marine diesel engine for this study. In a low temperature inflow gas condition which is similar with the exhaust temperature of large marine diesel engine, this study found that the conversion efficiency of reductant of when relative big size urea solution droplets are injected into exhaust gas stream can be larger than that of when small size urea solution droplets are injected. According to results of this study, the reason was associated with decrease of reaction rate constant caused from temperature drop of inflow gas by assist air of twin fluid atomizer.

• Journal of Photoscience
• /
• 제6권4호
• /
• pp.177-181
• /
• 1999

The photochemical transformation of carbon monoxide in aqueous ammonia solution has been investigated at 25${\pm}$0.1$^{\circ}C$ using 184.9 nm UV light. Amination and carbonylation processes were carried out by irradiating the aqueous ammonia solution saturated with carbon monoxide, and the formation of formamide, urea, hexamethylenetetramine, formaldehyde, glyoxal and hydrazine was observed. The formation of hydrazine was affected by the presence of ammonia, and the formation of carbonyl compounds such as formaldehyde and glyoxal was influenced by the presence of carbon monoxide. The formation of formamide, urea and hexamethylenetetramine was affected by both ammonia and carbon monoxide. The initial quantum yields of the products were determined and probable mechanisms for the photochemical reaction were presented on the basis of product analysis.

• 공업화학
• /
• 제3권1호
• /
• pp.100-110
• /
• 1992

수용액에서 amlne류와 arylsulfonyl carbamate류를 반응시켜 다음과 같은 arylsulfonyl urea유도체들을 좋은 수율로 쉽게 합성할 수 있다 : 1) N-Arylsulfonyl-N'-arylurea 유도체, 2) N-Arylsulfonyl-N'-alkyl urea 유도체, 3) N-Arylsulfonyl-N'-heterocyclic urea 유도체. Arylsulfonyl urea의 합성에 관한 반응메카니즘은, 먼저 산-염기 반응에 의해 ion-pair형태가 만들어지고, 그 다음 사면체형 중간체를 형성하는 친핵성첨가반응, 그리고 산촉매에 의한 alkoxide ion과 양성자의 제거반응에 따라 일어난다.